[1]陆明,张汉平,甘德淮,等.液混式膨化硝铵炸药生产技术研究[J].爆破器材,2009,38(06):14-16.
　LU Ming,ZHANG Hanping,GAN Dehuai,et al.Study on the Productive Technology of Expanded Ammonia Nitrate Explosive with Liquid Mixing[J].EXPLOSIVE MATERIALS,2009,38(06):14-16.
点击复制

液混式膨化硝铵炸药生产技术研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
38
期数:
2009年06
页码:
14-16
栏目:
爆炸材料
出版日期:
2009-12-20

文章信息/Info

Title:
Study on the Productive Technology of Expanded Ammonia Nitrate Explosive with Liquid Mixing
文章编号:
4196
作者:
陆明1; 张汉平2; 甘德淮2; 江志华2; 刘祖亮1; 吕春绪1
(1.南京理工大学化工学院,江苏南京210094；2.广东省力拓民爆器材厂，广东韶关512146）
Author(s):
LU Ming1;  ZHANG Hanping2;  GAN Dehuai2;  JIANG Zhihua2;  LIU Zuliang1;  Lǔ Chunxu1
1.School of Chemical Engineering; Nanjing University of Science and Technology (Jiangsu Nanjing, 210094) 2.Guangdong Lituo Explosive Material Plant (Guangdong Shaoguan, 512146)
关键词:
硝铵炸药; 制备工艺; 液液混合
Keywords:
ammonia nitrate explosive;  manufacturing process;  mixture with liquidliquid state
分类号:
TD235.21
文献标志码:
A
摘要:
文章研究液混式生产工艺制备膨化硝铵炸药。将86%～94%的氧化剂硝酸铵与可燃剂复合油相于100～120℃，在液态状态下进行混合，得到悬浮状混合分散体系，再采用连续真空干燥工艺，脱除体系中的水分，制得了高性能膨化硝铵炸药。论文讨论了年产2万吨液混式膨化硝铵炸药生产线的工艺流程、设备设计和生产过程控制，这对指导生产线建设和生产过程产品质量控制具有重要的现实意义。
Abstract:
The productive technology of expanded ammonia nitrate explosive with liquid mix is studied. The manufacturing process is as following: mixing 86%~94% ammonia nitrate oxidizer with combustibles fuel oil phase on the condition of liquid state at 100~120℃, obtaining suspended dispersion system, then drying the suspended dispersion system in vacuum, removing the water in system, getting the high performance expanded ammonia nitrate explosive. The technological process, equipment design and process control in the productive line of expanded ammonia nitrate explosive are discussed in this paper, and is useful for the construction of productive line and improving the quality of explosive products.

参考文献/References:

［1］陆 明.高性能粉状硝铵炸药研究［J］.爆破器材， 2007，36（6）：9~11.［2］吕春绪，刘祖亮，陆明.工业炸药理论［M］.北京：兵器工业出版社，2003.280~310.［3］陆 明.工业炸药配方设计［M］.北京：北京理工大学出版社，2002.76~103.［4］Ming Lu,Qifa Liu, A novel mathematical model of formulation design of emulsion explosive［J］.Journal of the Iranian Chemical Research, 2008, 1,33~40.［5］M. Lu and C. Lu, A computer model for formulation of ANFO explosives［J］. Sci. Tech. Energetic Materials,2007,68(4):117~119.［6］陆 明.表面活性剂及其应用技术［M］.北京：兵器工业出版社，2007.

相似文献/References:

[1]陈友民.全自动粉状硝铵炸药生产技术的分析和设计[J].爆破器材,2010,39(05):10.
　CHEN Youmin.Analysis and Design of Full-automatic Production Technics of Powder Ammonium Explosive[J].EXPLOSIVE MATERIALS,2010,39(06):10.
[2]李玉清,宋日,李渊,等.露天矿高台阶抛掷爆破炸药配方设计及现场制备[J].爆破器材,2013,42(03):37.[doi:10.3969/j.issn.1001-8352.2013.03.009]
　LI Yuqing,SONG Ri,LI Yuan,et al.Design and Onsite Preparation of Explosives Used for High Step Casting Blast in Open-pit Mine[J].EXPLOSIVE MATERIALS,2013,42(06):37.[doi:10.3969/j.issn.1001-8352.2013.03.009]
[3]刘瑶,王建华,刘玉存,等.薄片橡胶炸药的制备及性能研究[J].爆破器材,2014,43(02):24.[doi:10.3969/j.issn.1001-8352.2014.02.006]
　LIU Yao,WANG Jianhua,LIU Yucun,et al.Preparation and Performance Study of Thin Rubber Explosive[J].EXPLOSIVE MATERIALS,2014,43(06):24.[doi:10.3969/j.issn.1001-8352.2014.02.006]
[4]王浩,何中其,朱益.硝铵炸药真空干燥工艺燃爆事故致灾因素的研究[J].爆破器材,2019,48(04):60.[doi:10.3969/j.issn.1001-8352.2019.04.011]
　WANG Hao,HE Zhongqi,ZHU Yi.Study on the Blast Accident Causing Factors in Vacuum Drying Process of Ammonium Nitrate Explosives[J].EXPLOSIVE MATERIALS,2019,48(06):60.[doi:10.3969/j.issn.1001-8352.2019.04.011]
[5]杨泽宇①,李建①,何桂标①,等.基于流变特性的含铝凝胶燃料制备工艺研究[J].爆破器材,2023,52(03):1.[doi:10.3969/j.issn.1001-8352.2023.03.001]
　YANG Zeyu,LI Jian,HE Guibiao,et al.Preparation Process of Aluminium-Containing Gel Fuel Based on Rheological Properties[J].EXPLOSIVE MATERIALS,2023,52(06):1.[doi:10.3969/j.issn.1001-8352.2023.03.001]
[6]陆明,张汉平,甘德淮,等.液混式膨化硝铵炸药生产安全性研究[J].爆破器材,2009,38(04):12.
　LU Ming,ZHANG Hanping,GAN Dehuai,et al.Study on the Productive Safety of Expanded Ammonia Nitrate Explosive with Liquid Mixing[J].EXPLOSIVE MATERIALS,2009,38(06):12.

备注/Memo

备注/Memo:
收稿日期：2009-05-04作者简介：陆明（1963~），男，教授，主要研究方向为含能材料及精细化工。
更新日期/Last Update: 2011-05-12