[1]王浩,何中其,朱益.硝铵炸药真空干燥工艺燃爆事故致灾因素的研究[J].爆破器材,2019,48(04):60-64.[doi:10.3969/j.issn.1001-8352.2019.04.011]
 WANG Hao,HE Zhongqi,ZHU Yi.Study on the Blast Accident Causing Factors in Vacuum Drying Process of Ammonium Nitrate Explosives[J].EXPLOSIVE MATERIALS,2019,48(04):60-64.[doi:10.3969/j.issn.1001-8352.2019.04.011]
点击复制

硝铵炸药真空干燥工艺燃爆事故致灾因素的研究()
分享到:

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
48
期数:
2019年04
页码:
60-64
栏目:
安全与测试
出版日期:
2019-07-04

文章信息/Info

Title:
Study on the Blast Accident Causing Factors in Vacuum Drying Process of Ammonium Nitrate Explosives
文章编号:
5294
作者:
王浩何中其朱益
南京理工大学化工学院(江苏南京,210094)
Author(s):
WANG Hao HE Zhongqi ZHU Yi
School of Chemical Engineering, Nanjing University of Science and Technology (Jiangsu Nanjing, 210094)
关键词:
硝铵炸药真空干燥燃爆事故事故树最小径集结构重要度
Keywords:
ammonium nitrate explosives vacuum drying process blast accident fault tree minimal path sets structure importance
分类号:
X928.7; TQ560.6
DOI:
10.3969/j.issn.1001-8352.2019.04.011
文献标志码:
A
摘要:
真空干燥是硝铵炸药生产过程中一道容易发生燃爆事故的重要工序。为研究硝铵炸药真空干燥过程中发生燃爆事故的原因及机理,通过事故案例分析和现场调研,确定了导致燃爆事故的各个基本事件及其逻辑关系,并由此构建以燃爆事故作为顶事件的事故树。采用布尔代数化简事故树,得到87个最小割集和9个最小径集,结果显示每个最小径集包含的基本事件都较多,说明真空干燥工艺安全性较低。通过计算各基本事件的结构重要度并排序,得到结构重要度较大的基本事件,由此推断出导致燃爆事故的主要基本事件,并有针对性地提出相应的改进措施与建议,为企业的安全生产提供参考。
Abstract:
The vacuum drying is an important process in the production of ammonium nitrate explosives, while it is prone to blast during process. In order to study the causes and mechanisms of the blast accident in the vacuum drying process, this paper determines the basic events and their logical relationships through past cases analysis and onsite investigation, then a fault tree with the blast accident as the top event was developed. Via simplifying the fault tree by Boolean algebra, and 87 minimal cut sets and 9 minimal path sets are obtained. The results show that each minimal path set contains a relatively large number of basic events, indicating its inherent safety the vacuum drying process. Calculating the structure importance of each basic event and sorting to obtain the basic events with large structural importance, which represent the main events leading to the blast accident, and the corresponding rectification measures are proposed in a targeted manner to provide reference for the safe production of enterprises.

参考文献/References:

[1]张燕, 李婷婷, 张振中,等. 黑索今制备过滤过程中的特性与安全性[J]. 爆破器材, 2016, 45(6):16-20.
ZHANG Y,LI T T,ZHANG Z Z, et al. Characteristics and safety of RDX in filtering process in RDX preparation[J]. Explosive Materials, 2016,45(6):16-20.
[2]陈耀坤, 李亮. 黑索今生产线两次爆炸事故的教训[J]. 兵工安全技术, 1996(5):40-42.
[3]张幺玄, 张秋杰, 胡秀娟,等. RDX干燥过程影响因素的综合分析[J]. 爆破器材, 2011, 40(5):15-17,21.
ZHANG Y X,ZHANG Q J,HU X J, et al. Optimization of drying technological conditions of RDX[J]. Explosive Materials, 2011, 40(5):15-17,21.
[4]胡永胜, 张幺玄, 周述文,等. 黑索今连续干燥试验及其动力学研究[J]. 推进技术, 2015, 36(7):1110-1115.
HU Y S,ZHANG Y X,ZHOU S W, et al. Drying experiment and kinetics of RDX in a continuous dryer[J]. Journal of Propulsion Technology, 2015, 36(7):1110-1115.
[5]张南江. 钝化黑索今干燥工艺的改善与控制[J]. 火炸药学报, 1994(1):39-41.
[6]陈腾. RDX、TNT干燥特性实验与数学模拟[D]. 南京:南京理工大学, 2010.
[7]刘晓静. 火炸药典型生产过程安全性分析与评价[D]. 南京:南京理工大学, 2004.
[8]舒银克. 黑索金[M]. 北京:兵器工业出版社, 1974:90-92.
[9]MCAFEE J M. The deflagration-to-detonation transition[J]. Journal of Japan Society of Fluid Mechanics, 2007, 26(6):1057-1058.
[10]ZHANG T H, BAI Y L, WANG S Y, et al. Damage of a high-energy solid propellant and its effects on combustion[J]. Acta Mechanica Sinica, 2001, 17(4):348-353.
[11]胡毅亭, 陈网桦. 安全系统工程[M]. 南京:南京大学出版社, 2009.
[12]袁智, 汪海阁, 王海强,等. 基于事故树分析的钻井井漏事故危险评价研究[J]. 中国安全科学学报, 2010, 20(3):107-112.
YUAN Z, WANG H G, WANG H Q, et al. Application of fault tree analysis to risk assessment of lost circulation hazards in drilling[J]. China Safety Science Journal, 2010, 20(3):107-112.
[13]易静知. FTA在保险粉干燥锅爆炸事故分析中的应用[J]. 化工安全与环境, 2005(22):11-12.
[14]王勇, 陈全, 黄文栋. 环氧乙烷储罐区火灾爆炸事故树分析[J]. 天津理工大学学报, 2010, 26(1):75-77.
WANG Y, CHEN Q, HUANG W D. Fault tree analysis of fire and explosion accidents caused by EO tank[J]. Journal of Tianjin University of Technology, 2010, 26(1):75-77.
[15]郝彩霞, 许彦, 龚声武. 事故树分析法在LPG储罐火灾爆炸事故中的应用[J]. 中国安全生产科学技术, 2012, 8(1):154-159.
HAO C X, XU Y, GONG S W. Application of fault tree analysis on fire and blast accidents of LPG tank[J].Journal of Safety Science and Technology, 2012, 8(1):154-159.
[16]尹航. 石油储罐爆炸的事故树分析方法[J]. 科学技术与工程, 2010, 10(20):4913-4917,4929.
YIN H. Fault tree analysis of explosion for oil storage tank[J]. Science Technology and Engineering, 2010, 10(20):4913-4917,4929.
[17]彭琪琪, 何中其, 陈网桦,等. 基于事故树分析的固体推进剂捏合工序燃爆事故成因研究[J]. 兵器装备工程学报, 2017,38(1):137-141,157.
PENG Q Q, HE Z Q, CHEN W H, et al. Genesis study on blast accident in kneading process of solid propellant based on fault tree analysis[J]. Journal of Ordnance Equipment Engineering, 2017,38(1):137-141,157.
[18]刘明明, 胡甚平, 郭云龙,等. 集装箱化危险品船载运输风险因子辨识[J]. 中国安全科学学报, 2017,27(10):168-174.
LIU M M, HU S P, GUO Y L, et al. Risk factors identification of containerization dangerous goods on board[J]. China Safety Science Journal, 2017,27(10):168-174.
[19]魏春荣, 孙建华, 张锦鹏. 事故树定性分析法及其在矿井安全评价中的应用[J]. 工业安全与环保, 2009, 35(9):39-41.
WEI C R, SUN J H, ZHANG J P. Qualitative fault tree analysis and its application in safety assessment of mines[J]. Industrial Safety and Environmental Protection, 2009, 35(9):39-41.
[20]高震, 陈保东, 晏永飞,等. 模糊事故树法对注汽锅炉的爆管分析[J]. 辽宁石油化工大学学报, 2014, 34(6):63-66.
GAO Z, CHEN B D, YAN Y F, et al. The fuzzy fault tree analysis of pipe burst of steam injection boiler[J]. Journal of Liaoning Shihua University, 2014, 34(6):63-66.

相似文献/References:

[1]陈友民.全自动粉状硝铵炸药生产技术的分析和设计[J].爆破器材,2010,39(05):10.
 CHEN Youmin.Analysis and Design of Full-automatic Production Technics of Powder Ammonium Explosive[J].EXPLOSIVE MATERIALS,2010,39(04):10.
[2]陆明,张汉平,甘德淮,等.液混式膨化硝铵炸药生产技术研究[J].爆破器材,2009,38(06):14.
 LU Ming,ZHANG Hanping,GAN Dehuai,et al.Study on the Productive Technology of Expanded Ammonia Nitrate Explosive with Liquid Mixing[J].EXPLOSIVE MATERIALS,2009,38(04):14.
[3]陆明,张汉平,甘德淮,等.液混式膨化硝铵炸药生产安全性研究[J].爆破器材,2009,38(04):12.
 LU Ming,ZHANG Hanping,GAN Dehuai,et al.Study on the Productive Safety of Expanded Ammonia Nitrate Explosive with Liquid Mixing[J].EXPLOSIVE MATERIALS,2009,38(04):12.

备注/Memo

备注/Memo:
收稿日期:2018-09-12
第一作者:王浩(1994-),男,硕士研究生,主要从事化工工艺安全技术等方面的研究。E-mail: whhongdue@163.com
通信作者:何中其(1978-),男,博士,讲师,主要从事安全技术与安全工程方面的研究。E-mail: hzq555@163.com
更新日期/Last Update: 2019-07-04