[1]陈言坤,马士洲,汪海涛,等.基于燃气生成速率比的发射药破碎程度定量表征方法[J].爆破器材,2019,48(02):15-19.[doi:10.3969/j.issn.1001-8352.2019.02.003]
　CHEN Yankun,MA Shizhou,WANG Haitao,et al.Quantitative Characterization Method for Fragmentation Degree of Propellant Based on Ratio of Gas Generation Rates[J].EXPLOSIVE MATERIALS,2019,48(02):15-19.[doi:10.3969/j.issn.1001-8352.2019.02.003]
点击复制

基于燃气生成速率比的发射药破碎程度定量表征方法()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
48
期数:
2019年02
页码:
15-19
栏目:
基础理论
出版日期:
2019-04-02

文章信息/Info

Title:
Quantitative Characterization Method for Fragmentation Degree of Propellant Based on Ratio of Gas Generation Rates
文章编号:
5315
作者:
陈言坤; 马士洲; 汪海涛; 白云
军事科学院防化研究院（北京，102205）
Author(s):
CHEN Yankun;  MA Shizhou;  WANG Haitao;  BAI Yun
Institute of Chemical Defense, PLA Academy of Military Science (Beijing, 102205)
关键词:
发射药; 破碎程度; 燃气生成速率比; 密闭爆发器
Keywords:
propellant;  fragmentation degree;  ratio of gas generation rates;  closed-bomb
分类号:
TJ410；O34
DOI:
10.3969/j.issn.1001-8352.2019.02.003
文献标志码:
A
摘要:
为定量表征发射药的破碎程度，引入了燃气生成速率比的概念。通过理论推导,得出燃气生成速率比即为破碎发射装药与相应未破碎发射装药的燃烧表面积比。提出采用破碎发射药燃烧前期的燃气生成速率比的平均值来定量表征发射药的破碎程度。对标准发射药、大块发射药、小块发射药和粉末发射药进行了密闭爆发器试验，获得了不同发射药的p-t曲线，数据处理得到不同发射药破碎程度的量化值。结果表明，基于燃气生成速率比的发射药破碎程度定量表征方法是可行的。
Abstract:
To characterize fragmentation degree of propellant quantitatively, ratio of gas generation rates was introduced. It was deduced that the ratio of gas generation rates is correlated to the ratio of burning surface area of crushed propellant to that of the standard propellant. Fragmentation degree of propellant is characterized with the average value of the ratio of gas generation rates at the initial time. Closed-bomb test was used to test the standard propellant, massive propellant, bite-size propellant and powdered propellant, and the curves of the different propellants were obtained. The quantitative value of the fragmentation degree of propellant was obtained by processing the p-t curves. Results show that the quantitative characterization method for fragmentation degree of propellant based on the ratio of gas generation rates is feasible.

参考文献/References:

［1］贠来峰, 芮筱亭, 王浩, 等. 对发射装药引起膛炸机理的讨论［J］. 兵工学报, 2007, 28(2): 153-157.
YUN L F, RUI X T, WANG H, et al. Discussion about mechanism of breech-blow caused by propellant ［J］.Acta Armamentarii,2007, 28(2): 153-157.
［2］芮筱亭, 贠来峰, 沙南生, 等. 发射装药发射安全性评定技术的研究进展［J］. 兵工学报, 2005, 26(5): 690-696. RUI X T,
YUN L F, SHA N S, et al. Advance on launch safety for gun propellant charge［J］. Acta Armamentarii,2005, 26(5): 690-696.
［3］陈言坤，甄建伟，武慧恩，等.粒状发射药动态破碎研究进展［J］. 爆破器材，2014,43（1）:43-48.
?CHENG Y K, ZHEN J W, WU H E,et al.Research progress of dynamic fracture of granular propellant［J］. Explosive Materials,2014,43（1）:43-48.
［4］芮筱亭, 冯宾宾, 王国平. 发射装药发射安全性评估方法［J］.兵工自动化, 2011, 30(5): 56-59,71.
RUI X T, FENG B B, WANG G P. Evaluation method of launch safety of propellant charge［J］. Ordance Industry Automation,2011, 30(5): 56-59,71.
［5］贠来峰. 发射装药发射安全性评定方法研究［D］. 南京: 南京理工大学, 2008.
YUN L F. Study on the method of evaluating the launch safety for gun propellant charge［D］. Nanjing: Nanjing University of Science and Technology, 2008.
［6］徐浩, 芮筱亭, 郁兆华, 等. 发射装药挤压应力与破碎规律研究［J］. 火炸药学报, 2012, 35(4): 61-64,68.
XU H, RUI X T,YU Z H, et al. Study on extrusion stress and fracture law of propellant charge［J］. Chinese Journal of Explosives & Propellant, 2012, 35(4): 61-64,68.
［7］冯宾宾, 芮筱亭, 徐浩, 等. 发射过程中某硝胺发射装药的动态挤压破碎情况［J］.火炸药学报, 2012, 35(2): 70-73,85.
FENG B B,RUI X T,XU H, et al. Dynamic compression fracture condition of one nitramine propellant charge during launch courage［J］. Chinese Journal of Explosives & Propellant, 2012, 35(2): 70-73,85.
［8］王燕, 芮筱亭, 陈涛, 等.发射药床初始堆积形态对破碎程度的影响［J］. 火炸药学报, 2013, 36(4): 53-56,86.
WANG Y, RUI X T, CHEN T, et al. Effect of initial packing pattern on fragmentation degree of propellant beds［J］. Chinese Journal of Explosives & Propellant, 2013, 36(4): 53-56,86.
［9］姜世平, 芮筱亭, 洪俊, 等. 发射药床冲击破碎过程的数值模拟［J］. 固体力学学报, 2011, 32(4): 419-425.
JIANG S P, RUI X T, HONG J, et al. Simulation on fragmentation process of propellant bed under impact load［J］. Chinese Journal of Solid Mechanics, 2011, 32(4): 419-425.
［10］金志明, 翁春生. 火炮装药设计安全学［M］. 北京: 国防工业出版社, 2001:75-78.
JIN Z M, WENG C S. Charge design safety of guns［M］. Beijing: National Defense Industry Press, 2001:75-78.
［11］陈涛, 芮筱亭, 贠来峰. 发射药破碎程度描述方法［J］. 弹道学报, 2008, 20(2): 99-102.
CHEN T, RUI X T, YUN L F.Method of describing fracture degree of propellant［J］. Journal of Ballistics, 2008, 20(2): 99-102.
［12］王燕, 芮筱亭, 冯宾宾, 等.发射装药破碎程度表征方法研究［J］.含能材料, 2015, 23(1): 57-61.
WANG Y, RUI X T, FENG B B, at el. Characterization method for fragmentation degree of propellant charge［J］.Chinese Journal of Energetic Materials, 2015, 23(1): 57-61.
?［13］张小兵, 金志明.枪炮内弹道学［M］. 北京: 北京理工大学出版社, 2014:13-17.
?ZHANG X B, JIN Z M.Interior ballistics of guns［M］. Beijing: Beijing Institute of Technology Press, 2014: 13-17.
［14］邹瑞荣, 袁亚雄, 金志明, 等. 火炮点火初期膛内火药床运动规律研究［J］. 南京理工大学学报, 1994(2): 33-37.
ZOU R R, YUAN Y X, JIN Z M, et al. A study of the movement of propellant at the initial ignition stage in guns［J］. Journal of Nanjing University of Science and Technology, 1994(2): 33-37.
［15］叶敏.火炮膛内药床撞击与挤压的实验研究［D］. 南京: 南京理工大学, 2007.
YE M. Experiment research of propellant impact and compression in the bore［D］. Nanjing: Nanjing University of Science and Technology, 2007.

相似文献/References:

[1]黄亚峰,王晓峰,王红星,等.火炸药双螺杆挤出工艺的研究现状与发展[J].爆破器材,2013,42(04):41.[doi:10.3969/j.issn.1001-8352.2013.04.010]
　HUANG Yafeng,WANG Xiaofeng,WANG Hongxing,et al.Research Status and Development of the Twin Screw Extrusion Technology on the propellants and explosives[J].EXPLOSIVE MATERIALS,2013,42(02):41.[doi:10.3969/j.issn.1001-8352.2013.04.010]
[2]陈永康①②,陈明华②,张力①,等.用快速筛选仪研究发射药的热分解[J].爆破器材,2014,43(03):48.[doi:10.3969/j.issn.1001-8352.2014.03.011]
　CHEN Yongkang,CHEN Minghua,ZHANG Li,et al.Study on the Thermal Decomposition of Propellant Using Rapid Screening Device[J].EXPLOSIVE MATERIALS,2014,43(02):48.[doi:10.3969/j.issn.1001-8352.2014.03.011]
[3]刘强,张玉成,张江波,等.底喷式等离子体发生器的输出特性研究[J].爆破器材,2015,44(04):11.[doi:10.3969/j.issn.1001-8352.2015.04.003]
　LIU Qiang,ZHANG Yucheng,ZHANG Jiangbo,et al.Output Characteristics of the Bottomjet Plasma Generator[J].EXPLOSIVE MATERIALS,2015,44(02):11.[doi:10.3969/j.issn.1001-8352.2015.04.003]
[4]崔晓萍①,马永忠①,杨建②.某型枪射催泪弹的可靠性研究[J].爆破器材,2018,47(02):48.[doi:10.3969/j.issn.1001-8352.2018.02.010]
　CUI Xiaoping,MA Yongzhong,YANG Jian.Study on the Reliability of a Gun Firing Tear Gas Grenade[J].EXPLOSIVE MATERIALS,2018,47(02):48.[doi:10.3969/j.issn.1001-8352.2018.02.010]
[5]解德富①,黄振亚①,张成①,等.高燃速功能材料对高能发射药性能的影响[J].爆破器材,2020,49(06):27.[doi:10.3969/j.issn.1001-8352.2020.06.005]
　XIE Defu,HUANG Zhenya,ZHANG Cheng,et al.Influence of High Burning Rate Functional Materials on Properties of High Energy Gun Propellant[J].EXPLOSIVE MATERIALS,2020,49(02):27.[doi:10.3969/j.issn.1001-8352.2020.06.005]
[6]张邹邹,何昌辉,张衡,等.NC体系发射药烤燃点火的响应特性[J].爆破器材,2021,50(01):38.[doi:10.3969/j.issn.1001-8352.2021.01.007]
　ZHANG Zouzou,HE Changhui,ZHANG Heng,et al.Ignition Response Characteristics of NC Propellants under Cook-off Test[J].EXPLOSIVE MATERIALS,2021,50(02):38.[doi:10.3969/j.issn.1001-8352.2021.01.007]
[7]胡敏恩①,李芳②,宋立骞①,等.典型湿度条件下某双基发射药的安全储存寿命预估[J].爆破器材,2021,50(03):55.[doi:10.3969/j.issn.1001-8352.2021.03.011]
　HU Minen,LI Fang,SONG Liqian,et al.Safety Storage Life Estimation of a Double Base Propellant under Typical Humidity[J].EXPLOSIVE MATERIALS,2021,50(02):55.[doi:10.3969/j.issn.1001-8352.2021.03.011]
[8]韩冰,魏伦,于慧芳,等.CD-3发射装药低易损性能试验研究[J].爆破器材,2022,51(02):26.[doi:10.3969/j.issn.1001-8352.2022.02.004]
　HAN Bing,WEI Lun,YU Huifang,et al.Experimental Study on Low Vulnerability of CD-3 Propellant Charge[J].EXPLOSIVE MATERIALS,2022,51(02):26.[doi:10.3969/j.issn.1001-8352.2022.02.004]
[9]马健行①,王彦君②,陈华东②,等.典型换能元与点火药剂匹配试验研究[J].爆破器材,2022,51(05):31.[doi:10.3969/j.issn.1001-8352.2022.05.006]
　MA Jianxing,WANG Yanjun,CHEN Huadong,et al.Matching Experimental Study on Typical Energy Exchange Elements and Ignition Agents[J].EXPLOSIVE MATERIALS,2022,51(02):31.[doi:10.3969/j.issn.1001-8352.2022.05.006]
[10]郏杭生①,崔立宝①,丁亚军①,等.含CL-20的微孔发射药的设计及性能研究[J].爆破器材,2024,53(04):37.[doi:10.3969/j.issn.1001-8352.2024.04.006]
　JIA Hangsheng,CUI Libao,DING Yajun,et al.Design and Performance Study on Microporous Gun Propellant Containing CL-20[J].EXPLOSIVE MATERIALS,2024,53(02):37.[doi:10.3969/j.issn.1001-8352.2024.04.006]

备注/Memo

备注/Memo:
收稿日期：2018-12-19
第一作者：陈言坤（1985－），男，博士，工程师，主要研究方向：弹药设计理论与技术。E-mail: cyk19860110@163.com
通信作者：马士洲（1977－），男，助理研究员，主要研究方向：军事化学与烟火技术。E-mail: 13910011793@139.com
更新日期/Last Update: 2019-04-01