[1]史长根,洪津,蒋国良,等.爆炸焊接危害机理分析[J].爆破器材,2009,38(03):28-30.
　SHI Changgen,HONG Jin,JIANG Guoliang,et al.Harm Mechanism Analysis of Explosive Welding[J].EXPLOSIVE MATERIALS,2009,38(03):28-30.
点击复制

爆炸焊接危害机理分析()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
38
期数:
2009年03
页码:
28-30
栏目:
安全与测试
出版日期:
2009-06-20

文章信息/Info

Title:
Harm Mechanism Analysis of Explosive Welding
文章编号:
4161
作者:
史长根; 洪津; 蒋国良; 周春华
（解放军理工大学工程兵工程学院，江苏南京210007）
Author(s):
SHI Changgen;  HONG Jin;  JIANG Guoliang;  ZHOU Chunhua
Engineering Institute of Engineer Corps, PLA University of Science & Technology (Jiangsu Nanjing, 210007)
关键词:
爆炸焊接; 冲击波; 噪声; 震动
Keywords:
explosive welding;  shock wave;  noise;  explosive shake
分类号:
TG456.6 O389
文献标志码:
A
摘要:
该文通过测试指出了爆炸噪声是爆炸焊接作业中最主要的危害因素，并且分析研究了这种爆炸危害产生的机理，从而对爆炸噪声和爆炸冲击波的防护技术和措施提供了实验和理论基础。这对爆炸焊接金属复合材料行业超大规模化发展将起到很大的推动作用。
Abstract:
The explosion noise in the explosive welding was regarded to be the most important harm in this paper, and its mechanism this harm carried out was studied, which may provide the experimental and theoretical foundation for protective measures of the explosion noise and shock wave. It would promote the very large scale development of explosive welding metal composites.

参考文献/References:

［1］段卫东.爆炸焊接的安全评估和安全防护措施［J］.中国安全科学学报，1999,9(6):41~44.［2］中国力学学会工程爆破专业委员会.爆破工程［M］.北京：冶金工业出版社，1996.79~224.［3］史长根.双立式爆炸焊接装置及其方法［P］.中国专利：200610096800.3. ［4］李翼祺，马素贞.爆炸力学［M］.北京：科学出版社，1992.258~265.［5］王飞.挡波墙对冲击波的防护及数值模拟［D］.南京：解放军理工大学，2004.

相似文献/References:

[1]史长根,康丽霞,蒋国良.爆炸焊接两板安全间距分析和试验研究[J].爆破器材,2010,39(03):33.
　SHI Changgen,KANG Lixia,JIANG Guoliang.Analysis and Experimental Study of Safe Space between Two Plates in Explosive Welding[J].EXPLOSIVE MATERIALS,2010,39(03):33.
[2]史长根,冯叔瑜,史和生,等.3Cr13Mo-42CrMo高耐磨耐蚀爆炸焊接复合轧辊试验研究[J].爆破器材,2010,39(05):28.
　SHI Changgen,FENG Shuyu,SHI Hesheng,et al.Trial Study of High Wear-resisting and Acid-resisting Cladding Rolling of 3Cr13Mo-42CrMo in Explosive Welding[J].EXPLOSIVE MATERIALS,2010,39(03):28.
[3]刘鹏,陆明,史长根,等.爆炸焊接最佳药量窗口及其参数的确定[J].爆破器材,2011,40(03):35.
　LIU Peng,LU Ming,SHI Changgen,et al.Research on Optimum Charge Window in Explosive Welding[J].EXPLOSIVE MATERIALS,2011,40(03):35.
[4]史长根,尤峻,周祥,等.高压容器试验仓安全评估计算方法研究[J].爆破器材,2011,40(04):32.
　SHI Changgen,YOU Jun,ZHOU Xiang,et al.Study on Computational Method of Safe Evaluation for Test House of High Pressure Gases Vessel Explosion Hazards[J].EXPLOSIVE MATERIALS,2011,40(03):32.
[5]徐全军①,渠银录①,姜楠①,等.某炸药库内爆作用下坑道内隔爆防护墙厚度估算[J].爆破器材,2012,41(02):34.
　XU Quanjun,QU Yinglu,JIANG Nan,et al.Thickness Calculation of Tunnel Explosion Protection Wall under the Blasting Destroy in Explosive Magazine[J].EXPLOSIVE MATERIALS,2012,41(03):34.
[6]朱满林,石成英,蔡星会,等.基于ICP技术的炸药冲击波压力测定[J].爆破器材,2012,41(04):30.
　ZHU Manlin,SHI Chengying,CAI Xinghui,et al.Shock Wave Pressure Measurement of Explosive Based on ICP Technology[J].EXPLOSIVE MATERIALS,2012,41(03):30.
[7]连赟猛①,方道红②,顾晓辉①,等.典型密闭装置内爆炸尺寸效应研究[J].爆破器材,2012,41(05):1.
　LIAN Yunmeng,FANG Daohong,GU Xiaohui,et al.Effect of Scales on Typical Closed Structure Due to Internal Explosion[J].EXPLOSIVE MATERIALS,2012,41(03):1.
[8]唐文龙①,饶国宁①,周景蓉②,等.SUS304不锈钢/Q345R碳钢爆炸焊接工艺参数研究[J].爆破器材,2012,41(05):29.
　TANG Wenlong,RAO Guoning,ZHOU Jingrong,et al.Study on the Parameters in SUS304 Stainless Steel/Q345R Carbon Steel Explosive Welding Process[J].EXPLOSIVE MATERIALS,2012,41(03):29.
[9]李鸿宾,王建灵,张为鹏,等.铝粉比表面积与质量分数对浆状温压炸药爆炸冲击波影响的实验研究[J].爆破器材,2013,42(01):5.[doi:10.3969/j.issn.1001-8352.2013.01.002]
　LI Hongbin,WANG Jianling,ZHANG Weipeng,et al.Experiment Study on the Effect of Specific Surface Area and Content of Aluminum Powder on Shock Wave Output of Slurry TBE[J].EXPLOSIVE MATERIALS,2013,42(03):5.[doi:10.3969/j.issn.1001-8352.2013.01.002]
[10]孙光,熊代余,龚兵,等.粉状铵油炸药现场混装车的设计与应用[J].爆破器材,2013,42(05):27.[doi:10.3969/j.issn.1001-8352.2013.05.006]
　SUN Guang,XIONG Daiyu,GONG Bing,et al.Design and Application of Powdery Ammonium Nitrate Fuel Oil Explosive on Site Mixed Loading Truck[J].EXPLOSIVE MATERIALS,2013,42(03):27.[doi:10.3969/j.issn.1001-8352.2013.05.006]
[11]史长根,尤峻.双立式爆炸焊接新方法[J].爆破器材,2008,37(03):28.
　Shi Changgen,You Jun.New Technology of Double Vertical Explosive Welding[J].EXPLOSIVE MATERIALS,2008,37(03):28.

备注/Memo

备注/Memo:
收稿日期：2009-01-07作者简介：史长根（1971~），男，副教授，工学博士。主要从事爆炸加工及金属复合材料等方面的研究工作。
更新日期/Last Update: 2011-05-23