[1]史长根,尤峻,周祥,等.高压容器试验仓安全评估计算方法研究[J].爆破器材,2011,40(04):32-34、37.
　SHI Changgen,YOU Jun,ZHOU Xiang,et al.Study on Computational Method of Safe Evaluation for Test House of High Pressure Gases Vessel Explosion Hazards[J].EXPLOSIVE MATERIALS,2011,40(04):32-34、37.
点击复制

高压容器试验仓安全评估计算方法研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
40
期数:
2011年04
页码:
32-34、37
栏目:
出版日期:
2011-08-20

文章信息/Info

Title:
Study on Computational Method of Safe Evaluation for Test House of High Pressure Gases Vessel Explosion Hazards
文章编号:
4362
作者:
史长根; 尤峻; 周祥; 姜鹏飞
（解放军理工大学工程兵工程学院，江苏南京210007）
Author(s):
SHI Changgen;  YOU Jun;  ZHOU Xiang;  JIANG Pengfei
Engineering Institute of Engineer Corps, PLA University of Science & Technology (Jiangsu Nanjing, 210007)
关键词:
高压容器; 冲击波; 爆炸危害; 数值模拟
Keywords:
high pressure vessel;  shock wave;  explosion hazard;  numerical simulation
分类号:
O389
文献标志码:
A
摘要:
文章分析了高压容器爆炸对试验仓产生的三种危害模式，并采用等效TNT药量爆炸替代高压容器气体爆炸，对这三种危害模式的计算方法进行了研究。通过计算模型的建立和计算结果分析，对高压容器的爆炸危害安全评估进行了实例模拟和数值计算，为高压容器气体密封试验仓的结构设计和材料选择提供了一种计算方法。
Abstract:
Three hazard models on the test house are analyzed and studied when the explosion of the high pressure vessel by replacing high pressure gases vessel explosion with equivalent weight of TNT. The results of living example simulate and numerical compute are given about explosion hazards of the high pressure vessel by building compute model. These provide a kind of compute method of safe evaluation and construction design for test house of high pressure gases vessel explosion.

参考文献/References:

［1］郭吉红.压力容器爆炸事故分析和后果预测［J］.工业安全与环保, 2005, 31（9）：52~54.［2］杨勇，姜振锋. 高压容器爆炸能量的计算［J］.苏州大学学报-自然科学版, 2000, 16（1）：80~84.［3］王仲琦,宁建国,赵衡阳，等.挡墙对远场爆炸效应影响的数值模拟研究［J］.爆炸与冲击, 2000, 20（1）：87~91.［4］朱立新.挡波墙对空气冲击波的削波作用研究［J］.爆破,2003,20（1）: 78~80. ［5］白金泽.LSDYNA3D理论基础与实例分析［M］.北京：科学出版社，2005：120.［6］张耀辉.汽车炸弹作用下冲击波的传播规律及建筑物的动力特性［D］.武汉: 武汉理工大学, 2005.［7］刘声扬.钢结构［M］.北京：中国建筑工业出版社，1997：5~30.［8］成肇毅.压力容器爆炸物质的数量估算［J］.锅炉压力容器安全技术, 2004, 16（1）：19~21.

相似文献/References:

[1]史长根,洪津,蒋国良,等.爆炸焊接危害机理分析[J].爆破器材,2009,38(03):28.
　SHI Changgen,HONG Jin,JIANG Guoliang,et al.Harm Mechanism Analysis of Explosive Welding[J].EXPLOSIVE MATERIALS,2009,38(04):28.
[2]徐全军①,渠银录①,姜楠①,等.某炸药库内爆作用下坑道内隔爆防护墙厚度估算[J].爆破器材,2012,41(02):34.
　XU Quanjun,QU Yinglu,JIANG Nan,et al.Thickness Calculation of Tunnel Explosion Protection Wall under the Blasting Destroy in Explosive Magazine[J].EXPLOSIVE MATERIALS,2012,41(04):34.
[3]朱满林,石成英,蔡星会,等.基于ICP技术的炸药冲击波压力测定[J].爆破器材,2012,41(04):30.
　ZHU Manlin,SHI Chengying,CAI Xinghui,et al.Shock Wave Pressure Measurement of Explosive Based on ICP Technology[J].EXPLOSIVE MATERIALS,2012,41(04):30.
[4]连赟猛①,方道红②,顾晓辉①,等.典型密闭装置内爆炸尺寸效应研究[J].爆破器材,2012,41(05):1.
　LIAN Yunmeng,FANG Daohong,GU Xiaohui,et al.Effect of Scales on Typical Closed Structure Due to Internal Explosion[J].EXPLOSIVE MATERIALS,2012,41(04):1.
[5]李鸿宾,王建灵,张为鹏,等.铝粉比表面积与质量分数对浆状温压炸药爆炸冲击波影响的实验研究[J].爆破器材,2013,42(01):5.[doi:10.3969/j.issn.1001-8352.2013.01.002]
　LI Hongbin,WANG Jianling,ZHANG Weipeng,et al.Experiment Study on the Effect of Specific Surface Area and Content of Aluminum Powder on Shock Wave Output of Slurry TBE[J].EXPLOSIVE MATERIALS,2013,42(04):5.[doi:10.3969/j.issn.1001-8352.2013.01.002]
[6]杨亚东,李向东,王晓鸣.爆炸冲击波空中传播特征参量的优化拟合[J].爆破器材,2014,43(01):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
　YANG Yadong,LI Xiangdong,WANG Xiaoming.Optimum Fitting for Characteristic Parameters of Blast Shockwaves Traveling in Air[J].EXPLOSIVE MATERIALS,2014,43(04):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
[7]胡宏伟①,鲁忠宝②,郭炜①,等.水中爆炸的殉爆试验方法[J].爆破器材,2014,43(03):25.[doi:10.3969/j.issn.1001-8352.2014.03.006]
　HU Hongwei,LU Zhongbao,GUO Wei,et al.The Method of Sympathetic Detonation Experiment in Water[J].EXPLOSIVE MATERIALS,2014,43(04):25.[doi:10.3969/j.issn.1001-8352.2014.03.006]
[8]夏永乐①②,张志杰①②,翟永①②,等.基于FPGA+ARM+WIFI的炸药冲击波超压采集系统设计[J].爆破器材,2015,44(01):55.[doi:10.3969/j.issn.1001-8352.2015.01.013]
　XIA Yongle,ZHANG Zhijie,ZHAI Yong,et al.Design of Explosive Acquisition System for Shock Wave Overpressure Based on FPGA+ARM+WIFI[J].EXPLOSIVE MATERIALS,2015,44(04):55.[doi:10.3969/j.issn.1001-8352.2015.01.013]
[9]史长根,尤峻.双立式爆炸焊接新方法[J].爆破器材,2008,37(03):28.
　Shi Changgen,You Jun.New Technology of Double Vertical Explosive Welding[J].EXPLOSIVE MATERIALS,2008,37(04):28.
[10]严家佳,贾宪振,任松涛.一种传感器结构对水中爆炸冲击波影响的数值模拟研究[J].爆破器材,2016,45(01):7.[doi:10.3969/j.issn.1001-8352.2016.01.002]
　YAN Jiajia,JIA Xianzhen,REN Songtao.Numerical Simulation of Underwater Explosion Shock Wave Influenced by the Structure of One Sensor[J].EXPLOSIVE MATERIALS,2016,45(04):7.[doi:10.3969/j.issn.1001-8352.2016.01.002]

备注/Memo

备注/Memo:
收稿日期：2011-03-09 作者简介：史长根（1971~），男，博士，副教授。主要从事金属复合材料和爆炸焊接方面的研究工作。基金项目：江苏省博士后基金项目（2005-8）
更新日期/Last Update: 2011-08-31