[1]孙飞①,郭文华②,顾云①,等.矮胖式筒仓集群爆破切口参数设计及预处理技术[J].爆破器材,2021,50(01):59-64.[doi:10.3969/j.issn.1001-8352.2021.01.011]
　SUN Fei,GUO Wenhua,GU Yun,et al.Parameters Design of Blasting Cut and Pretreatment Technology of Chunky Silo Cluster[J].EXPLOSIVE MATERIALS,2021,50(01):59-64.[doi:10.3969/j.issn.1001-8352.2021.01.011]
点击复制

矮胖式筒仓集群爆破切口参数设计及预处理技术()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
50
期数:
2021年01
页码:
59-64
栏目:
爆破技术
出版日期:
2021-01-22

文章信息/Info

Title:
Parameters Design of Blasting Cut and Pretreatment Technology of Chunky Silo Cluster
文章编号:
5489
作者:
孙飞①; 郭文华②; 顾云①; 王旭鸣②; 单浩②; 李飞①
①核工业南京建设集团有限公司（江苏南京，211102）
②苏州市公安局（江苏苏州，215131）
Author(s):
SUN Fei①;  GUO Wenhua②;  GU Yun①;  WANG Xuming②;  SHAN Hao②;  LI Fei①
① Nuclear Industry Nanjing Construction Group Co., Ltd. (Jiangsu Nanjing, 211102)
② Suzhou Public Security Bureau (Jiangsu Suzhou, 215131)
关键词:
筒仓集群; 控制爆破; 失稳机理; 预处理
Keywords:
silo cluster;  controlled blasting;  instability mechanism;  pretreatment
分类号:
TU746.5
DOI:
10.3969/j.issn.1001-8352.2021.01.011
文献标志码:
A
摘要:
以张家港联峰钢铁筒仓集群爆破拆除工程为例进行研究。为确保筒仓集群顺利失稳倾倒，结合周围环境，选择分3次逐排定向爆破的总体方案。通过对单个筒仓爆破失稳倒塌机理的分析，借鉴烟囱爆破切口设计的成功经验，对筒仓爆破切口圆心角与切口高度进行了精心设计与安全校核，最终确定爆破切口圆心角α=252°，爆破切口高度Hp=10 m。在此基础上，结合筒仓自身结构特征，对筒仓关键部位进行预处理，进一步确保筒仓集群爆破失稳倾倒的可靠性。实践证明，筒仓集群3次逐排定向爆破效果与预期基本一致，可为类似工程提供参考。
Abstract:
The blasting demolition project of silo cluster in Lianfeng Steelworks in Zhangjiagang was researched. In order to ensure the silo cluster to collapse smoothly, combined with the surrounding environment, the overall scheme of directional blasting in three rows was selected. Based on the analysis of the collapse mechanism of single silo blasting and the successful experience of chimney blasting cut design, the center angle and cut height of silo blasting cut were carefully designed and checked for safety. Finally, the center angle of the blasting cut α= 252° and the height of the blasting cut HP=10 m were determined. On this basis, combined with the structural characteristics of the silo itself, the key parts of the silo were pretreated to further ensure the reliability of the unstable dumping of the silo group blasting. The practical results show that the effect of three times of directional blasting is basically the same as expected, which can provide reference for similar projects.

参考文献/References:

［1］汪小艳，孟祥栋，游晓丽，等. 大型断裂筒体精确控制爆破拆除［J］. 工程爆破，2013,19（6）：38-40.
WANG X Y，MENG X D，YOU X L，et al. Blasting demolition of the large fractured cylinder by precise control［J］. Engineering Blasting，2013，19（6）：38-40.
［2］李玉景，张宝亮，赵文，等. 电厂建筑群大解体式控制爆破实践［J］. 工程爆破，2019，25（4）：56-61.
LI Y J，ZHANG B L，ZHAO W，et al. The practice of macro disjoint controlled blasting for power plant building complex.［J］. Engineering Blasting，2019，25（4）：56-61.
［3］罗福友，陶明，王云茂，等. 复杂环境下薄壁式倒锥形水塔爆破拆除［J］. 工程爆破，2019，25（1）：38-44.
LUO F Y，TAO M，WANG Y M，et al. Blasting demonlition of thin-walled inverted cone water tower in complex environment［J］. Engineering Blasting，2019，25（1）：38-44.
［4］谢钱斌，张先东. 3座内部结构复杂的烟囱的爆破拆除［J］. 工程爆破，2017，23（2）：62-66.
XIE Q B，ZHANG X D. Blasting demolition of 3 chimneys with complex internal structure［J］. Engineering Blasting，2017，23（2）：62-66.
［5］涂胜，周献忠，胡方华. 复杂环境下85m两并立钢筋混凝土烟囱爆破拆除［J］. 爆破，2018，35（4）：99-103.
TU S，ZHOU X Z，HU F H. Explosive demolition for 85 m “twins” steel concrete chimney in complicated surroundings［J］. Blasting，2018，35（4）：99-103.
［6］赵小龙，晁娈娈，李传水，等. 联体砖混结构圆筒仓的控制爆破拆除［J］. 工程爆破，2014，20（4）：27-29，44.
ZHAO X L，CHAO L L，LI C S，et al. Demolition of the brick-concrete structure silo by controlled blasting［J］. Engineering Blasting，2014，20（4）：27-29，44.?
［7］龚相超，钟冬望，韩芳，等. 爆破拆除钢筋混凝土烟囱切口关键参数的研究［J］. 爆破，2013，30（4）：32-35，59.
GONG X C，ZHOGN D W，HAN F，et al. Research of key parameters of blast cut in explosive demolition of reinforced concrete chimney［J］.Blasting，2013，30（4）：32-35，59.
［8］蒋超. 爆破切口对冷却塔定向爆破效果影响的数值模拟研究［D］. 淮南：安徽理工大学，2014
.JIANG C. The blast demolition of reinforced concrete hyperbolic cooling tower and its numerical simulation［D］. Huainan:Anhui Univeristy of Science and Technology，2014.
［9］李洪伟，颜事龙，郭进，等. 爆破拆除切口形状对冷却塔爆破效果影响及数值模拟［J］. 爆破，2013，30（4）：92-95.
LI H W，YAN S L，GUO J，et al. Numerical simulation of effect of cut parameters on explosive demolition of cooling towers［J］.Blasting，2013，30（4）：92-95.
［10］司君婷，吕小师，曹娟. 210 m钢筋混凝土烟囱高位缺口控制爆破拆除实践［J］. 爆破，2017,34（1）：124-128.
SI J T，L- X S，CAO J. Application of controlled explosive demolition of 210 m reinforced concrete chimney with high blast-cut［J］.Blasting，2017,34（1）：124-128.
［11］陈晨，钟冬望，司剑锋，等. 箍筋切口位置对支撑梁爆破拆除影响数值分析［J］. 爆破，2018，35（2）：101-106.
CHEN C，ZHONG D W，SI J F，et al. Numerical analysis of influence of stirrup-cutting position on explosive demonlition of support beam［J］.Blasting，2018，35（2）：101-106.
［12］叶振辉. 高耸（高层）建筑物定向爆破拆除倒塌过程研究［D］. 兰州：兰州大学，2011.
YE Z H. Research of collapsing process of directional blasting demolition of towering building and tall building［D］. Lanzhou：Lanzhou Univeristy，2011.
［13］曾志. 高烟囱拆除爆破预处理技术［J］. 科技经济导刊，2018，26（34）：40-43.
［14］孙飞，龙源，纪冲，等. 复杂环境下200 m高烟囱爆破拆除及缓冲减振技术［J］. 工程爆破，2015，21（5）：63-67.
SUN F，LONG Y，JI C，et al. Blasting demolition of a 200 m high chimney and buffer damping technology in complicated surroundings［J］. Engineering Blasting，2015，21（5）：63-67.

相似文献/References:

[1]沈彤,徐全军,孔福利,等.危桥控制爆破拆除实践[J].爆破器材,2009,38(02):35.
　SHEN Tong,XU Quanjun,KONG Fuli,et al.Demolition of Bridge-beam by Controlled Blasting[J].EXPLOSIVE MATERIALS,2009,38(01):35.
[2]周向阳①,徐全军②,邹锐③,等.城市高架桥控制爆破飞散物防护技术研究与实践[J].爆破器材,2012,41(06):34.[doi:10.3969/J.ISSN.1001-8532.2012.06.010]
　ZHOU Xiangyang,XU Quanjun,ZOU Rui,et al.Research and Practice on Fly Rock Defense Technology of Urban Viaducts Controlled Blasting[J].EXPLOSIVE MATERIALS,2012,41(01):34.[doi:10.3969/J.ISSN.1001-8532.2012.06.010]
[3]戴俊,吴丙权,孟振.切缝药包控制爆破初始裂缝形成分析[J].爆破器材,2013,42(03):49.[doi:10.3969/j.issn.1001-8352.2013.03.012]
　DAI Jun,WU Bingquan,MENG Zhen.Analysis on Formation of Initial Cracks in Cutting Seam Cartridge due to Controlled Blasting[J].EXPLOSIVE MATERIALS,2013,42(01):49.[doi:10.3969/j.issn.1001-8352.2013.03.012]
[4]周应军,陈德志,李本伟,等.复杂环境下75m高冷却塔爆破拆除[J].爆破器材,2013,42(03):53.[doi:10.3969/j.issn.1001-8352.2013.03.013]
　ZHOU Yingjun,CHEN Dezhi,LI Benwei,et al.Blasting Demolition of 75m High Cooling Tower in Complicated Environment[J].EXPLOSIVE MATERIALS,2013,42(01):53.[doi:10.3969/j.issn.1001-8352.2013.03.013]
[5]齐世福,刘好全,李宾利,等.框剪结构高楼纵向倾倒拆除爆破研究[J].爆破器材,2014,43(03):41.[doi:10.3969/j.issn.1001-8352.2014.03.010]
　QI Shifu,LIU Haoquan,LI Binli,et al.Blasting Study on the Lengthwise Collapse of a Tall Building with a Frame Shear Wall Structure[J].EXPLOSIVE MATERIALS,2014,43(01):41.[doi:10.3969/j.issn.1001-8352.2014.03.010]
[6]夏卫国①,袁平①②,武双章①,等.复杂环境下两座烟囱交叉定向爆破拆除[J].爆破器材,2015,44(01):50.[doi:10.3969/j.issn.1001-8352.2015.01.012]
　XIA Weiguo,YUAN Ping,WU Shuangzhang,et al.Crossed Directional Blasting of Two Chimneys under Complex Surroundings[J].EXPLOSIVE MATERIALS,2015,44(01):50.[doi:10.3969/j.issn.1001-8352.2015.01.012]
[7]胡葵.城镇闹市区地铁车站基坑的控制爆破[J].爆破器材,2016,45(06):51.[doi:10.3969/j.issn.1001-8352.2016.06.010]
　HU Kui.Controlled Blasting of Foundation Pit at Subway Station in Downtown Area[J].EXPLOSIVE MATERIALS,2016,45(01):51.[doi:10.3969/j.issn.1001-8352.2016.06.010]
[8]姚显春①②,姚尧①②,寄科祥②,等.城市复杂环境下90 m钢筋砼烟囱的定向爆破拆除[J].爆破器材,2017,46(06):53.[doi:10.3969/j.issn.1001-8352.2017.06.011]
　YAO Xianchun,YAO Yao,JI Kexiang,et al.Directional Blasting Demolition of a 90m-high Steel-concrete Chimney in Urban Complex Environment[J].EXPLOSIVE MATERIALS,2017,46(01):53.[doi:10.3969/j.issn.1001-8352.2017.06.011]
[9]黄磊,唐勇,杨建军.大曲率非对称匝道桥爆破拆除[J].爆破器材,2021,50(04):60.[doi:10.3969/j.issn.1001-8352.2021.04.011]
　HUANG Lei,TANG Yong,YANG Jianjun.Explosive Demolition of an Asymmetric Ramp Bridge with Large Curvature[J].EXPLOSIVE MATERIALS,2021,50(01):60.[doi:10.3969/j.issn.1001-8352.2021.04.011]
[10]王静①,薛永利①,丁建②③,等.岩石控界切割锥形聚能射流的优化设计及试验[J].爆破器材,2023,52(03):52.[doi:10.3969/j.issn.1001-8352.2023.03.008]
　WANG Jing,XUE Yongli,DING Jian,et al.Optimal Design and Test of Conical Shaped Charge for Rock Boundary Control Cutting[J].EXPLOSIVE MATERIALS,2023,52(01):52.[doi:10.3969/j.issn.1001-8352.2023.03.008]

备注/Memo

备注/Memo:
收稿日期：2020-06-08
第一作者：孙飞 (1989－)，男，硕士，工程师（采矿专业），研究方向为爆炸与毁伤作用机理研究及其应用。E-mail：1326662880@qq.com
更新日期/Last Update: 2021-01-22