[1]彭云昆,刘桦,谢元丽,等.卡尔?费休法测定乳化炸药含水量[J].爆破器材,2017,46(02):39-42.[doi:10.3969/j.issn.1001-8352.2017.02.009]
 PENG Yunkun,LIU hua,XIE yuanli,et al.Determination of Water Content in Emulsion Explosive by Karl Fischer Method[J].EXPLOSIVE MATERIALS,2017,46(02):39-42.[doi:10.3969/j.issn.1001-8352.2017.02.009]
点击复制

卡尔?费休法测定乳化炸药含水量()
分享到:

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
46
期数:
2017年02
页码:
39-42
栏目:
爆炸材料
出版日期:
2017-03-21

文章信息/Info

Title:
Determination of Water Content in Emulsion Explosive by Karl Fischer Method
文章编号:
5109
作者:
彭云昆刘桦谢元丽余燕郤泽
云南安化有限责任公司(云南昆明,650301)
Author(s):
PENG Yunkun LIU huaXIE yuanliYU YanXI Ze
Yunnan Anhua Co., Ltd. (Yunnan Kunming, 650301)
关键词:
乳化炸药含水量测定卡尔?费休法
Keywords:
emulsion explosive water content measurement Karl Fischer method
分类号:
TD235.2+1
DOI:
10.3969/j.issn.1001-8352.2017.02.009
文献标志码:
A
摘要:
文章对乳化炸药中水分的存在形式进行了分析,并提出了一种适用于乳化炸药含水量的测定方法——卡尔?费休水分测定法。经过测定不同生产工艺、不同乳化剂的乳化炸药样品的含水量,并作重现性试验和回收试验,表明该方法在测量乳化炸药含水量时,具有测量时间短、精度高、测量结果重现性好等特点,适合在生产线或实验室进行推广应用。
Abstract:
Water form in emulsion explosive was analyzed, and a method for determination of the water content in emulsion explosive, Karl Fischer method, was proposed.Water contents in emulsion explosives by different production process and different emulsifier were tested, and reproducibility test and recovery test were also conducted. Results show that this method has short measurement time, high accuracy, and good repeatability of measurement results.It is suitable for application on production line or in lab.

参考文献/References:

[1]吕春绪.工业炸药理论[M].北京: 兵器工业出版社,2003:246.
[2]吴国群,罗伟,胡鑫.含水量对乳化炸药爆轰参数的影响[J].科技创新导报,2014,11(7):255-256.
[3]黄丽芹.共沸蒸馏法在乳化炸药胶体水份测定中的应用[J].黑龙江科技信息,2011(8):46.
[4]杨开稳.乳化炸药中水份的气相色谱法测定[J].有色金属(矿山部分),1983(4):39-42.
[5]汪旭光.乳化炸药[M].2版.北京: 冶金工业出版社,2008:779-780. WANG X G. Emulsion explosive [M]. 2nd ed. Beijing: Metallurgical Industry Press,2008:779-880.
[6]张战军,温丽瑗,吴世逵,等.卡尔?费休法测定石油产品水分的影响因素分析[J].当代化工,2015,44(12):2936-2938.
ZHANG Z J,WEN L Y, WU S K, et al. Analysis of factors to affect determination of water content in petroleum products by Karl Fischer method [J]. Contemporary Chemical Industry,2015,44(12):2936-2938.
[7]全国化学标准化技术委员会.化工产品中水含量的测定 卡尔?费休法(通用方法):GB/T6283—2008[S/OL].北京:中国标准出版社,2008-06-18.[2017-01-11].http:www.csres.com/detai/192005.html.
[8]中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.石油产品、润滑油和添加剂中水含量测定法 卡尔?费休法:GB/T11133—2015[S/OL].北京:中国标准出版社,2015-12-31[2017-01-11].http://www.csres.com/detail/279081.html.
[9]潘永康,王喜忠,刘相东.现代干燥技术[M].2版.北京: 化学工业出版社,2007:18-19.
[10]德鲁?迈尔斯.表面、界面和胶体:原理及应用[M].吴大诚,朱谱新,王罗新,等,译.北京:化学工业出版社,2005:101.
 MYERS D. Surfaces,interface and colloids:principles and applications[M]. WU D C, ZHU P X, WANG L X, et al, translated. Beijing: Chemical Industry Press,2005:101.

相似文献/References:

[1]熊家权,林华岱.影响乳化炸药性能因素探讨[J].爆破器材,2010,39(01):13.
 XIONG Jiaquan,LIN Huadai.Discussion on Factors Affecting the Performance of Emulsion Explosive[J].EXPLOSIVE MATERIALS,2010,39(02):13.
[2]彭云昆,刘桦.应用卡尔费休法测定膨化硝酸铵炸药的含水量[J].爆破器材,2010,39(01):24.
 PENG Yunkun,LIU Hua.Determination of Water in Expanded Ammonium Nitrate Explosives by Karl Fischer method[J].EXPLOSIVE MATERIALS,2010,39(02):24.
[3]黄铁飞,荣光富,杨曙光,等.乳化剂对混装乳化炸药质量性能的影响及实践应用[J].爆破器材,2010,39(02):14.
 HUANG Tiefei,RONG Guangfu,YANG Shuguang,et al.Effect of Emulsifier on the Quality Performance of Emulsion Explosive and Its Practical Application[J].EXPLOSIVE MATERIALS,2010,39(02):14.
[4]阮华.用正交试验方法优化乳化炸药设计[J].爆破器材,2010,39(02):23.
 RUAN Hua.The Optimization of the Emulsion Explosive by Using Orthogonal Experimental Method[J].EXPLOSIVE MATERIALS,2010,39(02):23.
[5]李瑛,柏存增.不同敏化条件下乳化炸药减敏的实验研究[J].爆破器材,2011,40(01):19.
 LI Ying,BO Cunzeng.Experimental Research on Reducing Sensitivity of Emulsion Explosive in Different Sensitization Methods[J].EXPLOSIVE MATERIALS,2011,40(02):19.
[6]郭敏,贾海亮,原海青,等.高温敏化工艺乳化炸药储存期影响因素分析[J].爆破器材,2011,40(01):24.
 GUO Min,JIA Hailiang,YUAN Haiqing,et al.Analysis of Influencing Factors on the Storage of Emulsion Explosives by High-temperature Sensitization[J].EXPLOSIVE MATERIALS,2011,40(02):24.
[7]龚兵,熊代余,李国仲,等.BCJ多功能装药车的研究与应用[J].爆破器材,2010,39(03):12.
 GONG Bing,XIONG Daiyu,LI Guozhong,et al.Development and Application of BCJ Multi-function Charge Truck[J].EXPLOSIVE MATERIALS,2010,39(02):12.
[8]王军,王越胜.故障树分析法在乳化炸药生产中的应用概述[J].爆破器材,2010,39(03):15.
 WANG Jun,WANG Yuesheng.Application of Fault Tree Analysis in the Production of Emulsion Explosive[J].EXPLOSIVE MATERIALS,2010,39(02):15.
[9]张翠英,吴龙祥,王永斌.新型高效乳化器的研制及应用[J].爆破器材,2010,39(05):12.
 ZHANG Cuiying,WU Longxiang,WANG Yongbin.Research and Application of the New-type Efficient Emulsifier[J].EXPLOSIVE MATERIALS,2010,39(02):12.
[10]马耀川.全连续化乳化生产线影响炸药爆炸性能的几个因素[J].爆破器材,2010,39(05):20.
 MA Yaochuan.Several Factors Affecting the Performance of Emulsion Explosive in Continuous Production Line[J].EXPLOSIVE MATERIALS,2010,39(02):20.

备注/Memo

备注/Memo:
收稿日期:2016-07-14
作者简介:彭云昆(1972-),男,高级工程师,从事民用爆炸物品理化检测工作。E-mail:pyk2003@163.com
更新日期/Last Update: 2017-03-21