[1]张世林①,黄德雨②,樊雪锋①,等.轴向驱动反应破片的作用过程[J].爆破器材,2016,45(04):49-53.[doi:10.3969/j.issn.1001-8352.2016.04.011]
　ZHANG Shilin,HUANG Deyu,FAN Xuefeng,et al.Research on the Mechanism of Axial Driving Response Fragments[J].EXPLOSIVE MATERIALS,2016,45(04):49-53.[doi:10.3969/j.issn.1001-8352.2016.04.011]
点击复制

轴向驱动反应破片的作用过程()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
45
期数:
2016年04
页码:
49-53
栏目:
爆炸材料
出版日期:
2016-07-12

文章信息/Info

Title:
Research on the Mechanism of Axial Driving Response Fragments
文章编号:
4991
作者:
张世林①; 黄德雨②; 樊雪锋①; 吴建萍①
①中船重工第710研究所（湖北宜昌,443000）
②中国人民解放军95874部队（江苏南京,210022）
Author(s):
ZHANG Shilin①; HUANG Deyu②; FAN Xuefeng①; WU Jianping①
①710 Institute, China Shipbuilding Industry Corporation (HuBei Yichang, 443000)
② Unit 95874,PLA (Jiangsu Nanjing, 210022)
关键词:
反应破片; 数值模拟; 毁伤; 飞散特性
Keywords:
response fragment;  numerical simulation;  damage;  scattering characteristic
分类号:
TJ760.3+1
DOI:
10.3969/j.issn.1001-8352.2016.04.011
文献标志码:
A
摘要:
为提高舰炮末端硬拦截反舰导弹的能力，提高对目标的毁伤效能，设计了一种轴向驱动反应破片战斗部。应用非线性有限元软件ANSYS/LS-DYNA对破片战斗部进行了数值模拟分析，数值模拟结果表明：采用PTFE(聚四氟乙烯)作为内衬可以有效提高破片的完整性和抛撒速度。通过试验对设计的战斗部进行了毁伤效能验证，试验结果表明：反应破片在侵彻靶板后，具有爆燃等二次毁伤效应，造成的损伤效果优于传统型利用动能打击目标的惰性破片，可使舰船硬拦截反导效能显著提高。
Abstract:
In order to improve naval guns ability of terminal intercepting anti-ship missile,and improve the damage efficiency to target, an axial driving response fragment warhead was designed. ANSYS/LS-DYNA,the non-linear finite element analysis software, was used to perform the numerical simulation of the reliability of the fragment warhead. Results show that using PTFE (teflon) as the inner liner can effectively improve the integrity and the dispersal speed of fragments. Damage efficiency of the designed warhead was verified by experiments. Test results show: after penetrating the target plate, the burning fragments possesses secondary damage effects due to deflagration, which is superior to traditional fragment, by mean of the kinetic energy. It could greatly improve the efficient of anti missile.

参考文献/References:

［1］周智超,吴晓锋,冷画屏.舰炮近炸引信预制破片弹在反导中的弹丸威力分析［J］.军事运筹与系统工程,2005,19(2):67-70.
［2］隋树元,王树山.终点效应学［M］.北京:国防工业出版社,2000 SUI S Y,WANG S S.Terminal effects［M］.Beijing: National Defend Industry Press,2000.
［3］邢恩峰,钱建平,赵国志.装药结构参数对轴向预制破片抛掷速度的影响［J］.火炸药学报,2007,30(1):49-53.
XING E F,QIAN J P,ZHAO G Z. Effect of structural parameters of charge on the driving velocity of axial preformed fragments［J］.Chinese Journal of Explosives & Propellants,2007,30(1):49-53.
［4］张辉,李向豪，张选明.轴向增强炮弹破片场优化控制及反导效能分析［J］.计算机仿真，2012，29（9）：22-27.
ZHANG H，LI X H,ZHANG X M. Optimal control about axial enhanced artillery shells exploding and damage analysis of missiles［J］.Computer Simulation,2012，29(9)：22-27.
［5］黄亨建,黄辉，阳世清，等.毁伤增强型破片探索研究［J］.含能材料,2007,15(6):566-569.
 HUANG H J，HUANG H,YANG S Q,et al. Preliminary research on damage enhanced fragment［J］.Chinese Joural of Energetic Materials,2007,15(6):566-569.
［6］徐松林，阳世清，张炜，等.PTFE/Al含能复合物的本构关系［J］.爆炸与冲击,2010,30(4):439-444.
 XU S L，YANG S Q,ZHANG W,et al.A constitutive relation for a pressed PTFE/Al energetic composite material［J］.Explosion and Shock Waves,2010,30(4):439-444.
［7］阳世清，徐松林，张彤.PTFE/Al反应材料制备工艺及性能［J］.国防科技大学学报,2008,30(6):39-42,62.
YANG S Q,XU S L,ZHANG T.Preparation and perfor mance of PTFE/Al reactive materials［J］. Journal of National University of Defense Technology，2008,30(6):39-42,62.
［8］张世林.轴向预制破片战斗部破片飞散特性影响因素分析［D］.太原：中北大学，2012.
ZHANG S L.Analyze on the factors of dispersion characteristic of axial prefabricated fragments［D］.Taiyuan:North University of China,2012.
［9］孙文旭，李尚斌，黄亨建,等.防护材料对爆炸驱动反应破片的影响［J］.科技导报,2011，29（16）：30-34.
 SUN W X, LI S B,HUANG H J,et al. Impact of the protective materials on explosion driving reactive fragments［J］.Science & Technology Review,2011,29(16):30-34.
［10］才鸿年,王鲁,李树奎.战斗部材料研究进展［J］.中国工程科学,2002,4(12):21-27.
CAI H N,WANG L,LI S K.Research progress in warhead materials［J］.Engineering Science,2002,4(12):21-27.
［11］时党勇,李裕春,张胜民.基于ANSYS/LS-DYNA8.1进行显示动力分析［M］.北京：清华大学出版社，2005.

相似文献/References:

[1]郭涛,高振儒,范磊,等.不同位置条件下减震沟减震效应的数值模拟[J].爆破器材,2010,39(02):7.
　GUO Tao,GAO Zhenru,FAN Lei,et al.Numerical Simulation of Damping Effect of Damping Ditch with Different Location[J].EXPLOSIVE MATERIALS,2010,39(04):7.
[2]朱铭颉,顾文彬,唐勇,等.炸高对侵彻效应影响试验和数值模拟研究[J].爆破器材,2010,39(02):31.
　ZHU Mingjie,GU Wenbin,TANG Yong,et al.The Experimental & Numerical Simulation of the Standoff Effect to Penetra[J].EXPLOSIVE MATERIALS,2010,39(04):31.
[3]张世林,周春桂,王志军,等.一种新型水射流切割器成型的仿真研究[J].爆破器材,2011,40(02):5.
　ZHANG Shilin,ZHOU Chungui,WANG Zhijun.Simulation and Research on Water Jet Formation of a New Type Molding Cutter[J].EXPLOSIVE MATERIALS,2011,40(04):5.
[4]姚志华,王志军,付璐,等.半正方形罩线型切割器的数值模拟研究[J].爆破器材,2011,40(02):11.
　YAO Zhihua,WANG Zhijun,FU Lu,et al.Numerical Simulation of Linear Cutter with Semi-square Liner[J].EXPLOSIVE MATERIALS,2011,40(04):11.
[5]刘好全,何洋扬,张洋溢.爆轰波斜入射金属材料的模拟计算[J].爆破器材,2009,38(06):1.
　LIU Haoquan,HE Yangyang,ZHANG Yangyi.Simulation on the Oblique Reflection of Detonation Waves at the ExplosiveMetal Interface[J].EXPLOSIVE MATERIALS,2009,38(04):1.
[6]安二峰,杨军,陈鹏万.高锰钢整铸辙叉爆炸硬化实践与研究[J].爆破器材,2009,38(02):25.
　AN Erfeng,YANG Jun,CHEN Pengwan.Study on Explosive Hardening of Hadfield Steel Rail Frogs[J].EXPLOSIVE MATERIALS,2009,38(04):25.
[7]徐全军,白帆,伍睿星.占据式聚能装药射流形成的数值模拟及试验研究[J].爆破器材,2011,40(03):11.
　XU Quanjun,BAI Fan,WU Ruixing.Numerical Simulation of Jet Formation by Shaped Charge with the Inhibitor and Experimental Investigation[J].EXPLOSIVE MATERIALS,2011,40(04):11.
[8]成凤生,宋浦,顾晓辉,等.TNT装药爆炸波在刚性平面上方传播反射的数值研究[J].爆破器材,2011,40(04):1.
　CHENG Fengsheng,SONG Pu,GU Xiaohui,et al.Numerical Investigation into the Propagation and Reflection of TNT Blast Wave above Rigid Plane[J].EXPLOSIVE MATERIALS,2011,40(04):1.
[9]史长根,尤峻,周祥,等.高压容器试验仓安全评估计算方法研究[J].爆破器材,2011,40(04):32.
　SHI Changgen,YOU Jun,ZHOU Xiang,et al.Study on Computational Method of Safe Evaluation for Test House of High Pressure Gases Vessel Explosion Hazards[J].EXPLOSIVE MATERIALS,2011,40(04):32.
[10]贾伟①②,吴国东①,王志军①,等.药型罩结构对环形爆炸成型弹丸形成的影响[J].爆破器材,2011,40(06):8.
　JIA Wei,WU Guodong,WANG Zhijun,et al.Influence of Liner Structure on Forming Process of Annular EFP[J].EXPLOSIVE MATERIALS,2011,40(04):8.

备注/Memo

备注/Memo:
收稿日期：2015-06-25
作者简介：张世林（1986-），男，工程师，硕士，主要从事弹药工程方面的研究。E-mail:zsl.31@163.com
更新日期/Last Update: 2016-07-12