[1]徐全军①,渠银录①,姜楠①,等.某炸药库内爆作用下坑道内隔爆防护墙厚度估算[J].爆破器材,2012,41(02):34-36、40.
　XU Quanjun,QU Yinglu,JIANG Nan,et al.Thickness Calculation of Tunnel Explosion Protection Wall under the Blasting Destroy in Explosive Magazine[J].EXPLOSIVE MATERIALS,2012,41(02):34-36、40.
点击复制

某炸药库内爆作用下坑道内隔爆防护墙厚度估算()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
41
期数:
2012年02
页码:
34-36、40
栏目:
出版日期:
2012-04-20

文章信息/Info

Title:
Thickness Calculation of Tunnel Explosion Protection Wall under the Blasting Destroy in Explosive Magazine
文章编号:
4441
作者:
徐全军① ; 渠银录①; 姜楠① ; 夏裕帅② ; 万仁红①
① 解放军理工大学工程兵工程学院（江苏南京，210007）
②深圳市蛇口招商港湾建设工程有限公司（广东深圳，518067）
Author(s):
XU Quanjun①;  QU Yinglu①;  JIANG Nan①;  XIA Yushuai②;  WAN Renhong①
①Engineering Institute of Engineer Corps, PLA University of Science & Technology (Jiangsu Nanjing, 210007) ②Shenzhen Shekou Commercial Investment and Harbour Construction Limited Company (GuangDong Shenzhen, 518067)
关键词:
防护墙; 冲击波; 炸药库; 坑道
Keywords:
protection wall;  blast wave;  explosive magazine;  tunnel
分类号:
TU746.5 TD235.4
文献标志码:
A
摘要:
文章以某炸药库安全评估工程的实际问题为背景，考虑到周围墙体的限制，坑道内的冲击波得以加强，以及附近坑道施工不受到影响为原则，通过数值模拟和简单公式，分析了10 t炸药库的爆炸破坏作用，提出了内爆作用下隔爆防护墙厚度的估算方法，并研究在一定的冲击波作用下隔爆防护墙的厚度，为安全评估提供参考。
Abstract:
In this paper, an actual project in explosive magazine safety evaluation is taken as the background. When the explosion happens in the magazine, consider the limit of the wall, the blast shock wave in the tunnel will strengthen, and it should not affect the adjacent tunnel project. Based on those above principles, the numerical simulation and the formula calculation are used to analyze the blast destruction effect, and a thickness calculation method of the explosion protection wall under the blast shock wave load is proposed. The thickness of the explosion protection wall under a certain blast shock wave is also studied, to provide references for safety evaluation.

参考文献/References:

［1］蔡军锋,易建政，张晓倩．坑道内爆毁伤效应与隔爆防护研究综述［J］.地下空间与工程学报,2009,5(2): 354～357.
［2］李秀地，郑颖人，郑云木，等.坑道内冲击波冲量传播规律的试验研究［J］.爆破器材，2007，36（3）：4～7.
［3］穆朝民，任辉启，李永池，等.爆炸冲击波在复杂坑道内传播规律的数值研究［J］.爆破器材，2008，37（5）：1～4.
［4］杨科之，杨秀敏．坑道内化爆冲击波的传播规律［J］．爆炸与冲击,2003,23(1):37～40．
［5］夏志成，王静，施翠英．内爆炸作用下抗爆单元防护隔爆墙厚度计算［J］．弹箭与制导学报,2009,29(1):144～147.
［6］顾文彬，孔劲松，吴腾芳，等．环状分布装药容器中爆炸载荷研究［J］.爆破器材，1999,28（5）：19～21.
［7］吴世永，张舵，卢芳云.坑道内爆炸波的传播规律研究［J］. 地下空间与工程学报,2010,6(2):396～399.
［8］中国建筑科学研究院.GB50011—2001建筑抗震设计规范题［S］.北京:中国建筑工业出版社，2001.
［9］Century Dynamics. AUTODYN Theory Manual ［M］.2005 .

相似文献/References:

[1]史长根,洪津,蒋国良,等.爆炸焊接危害机理分析[J].爆破器材,2009,38(03):28.
　SHI Changgen,HONG Jin,JIANG Guoliang,et al.Harm Mechanism Analysis of Explosive Welding[J].EXPLOSIVE MATERIALS,2009,38(02):28.
[2]史长根,尤峻,周祥,等.高压容器试验仓安全评估计算方法研究[J].爆破器材,2011,40(04):32.
　SHI Changgen,YOU Jun,ZHOU Xiang,et al.Study on Computational Method of Safe Evaluation for Test House of High Pressure Gases Vessel Explosion Hazards[J].EXPLOSIVE MATERIALS,2011,40(02):32.
[3]朱满林,石成英,蔡星会,等.基于ICP技术的炸药冲击波压力测定[J].爆破器材,2012,41(04):30.
　ZHU Manlin,SHI Chengying,CAI Xinghui,et al.Shock Wave Pressure Measurement of Explosive Based on ICP Technology[J].EXPLOSIVE MATERIALS,2012,41(02):30.
[4]连赟猛①,方道红②,顾晓辉①,等.典型密闭装置内爆炸尺寸效应研究[J].爆破器材,2012,41(05):1.
　LIAN Yunmeng,FANG Daohong,GU Xiaohui,et al.Effect of Scales on Typical Closed Structure Due to Internal Explosion[J].EXPLOSIVE MATERIALS,2012,41(02):1.
[5]李鸿宾,王建灵,张为鹏,等.铝粉比表面积与质量分数对浆状温压炸药爆炸冲击波影响的实验研究[J].爆破器材,2013,42(01):5.[doi:10.3969/j.issn.1001-8352.2013.01.002]
　LI Hongbin,WANG Jianling,ZHANG Weipeng,et al.Experiment Study on the Effect of Specific Surface Area and Content of Aluminum Powder on Shock Wave Output of Slurry TBE[J].EXPLOSIVE MATERIALS,2013,42(02):5.[doi:10.3969/j.issn.1001-8352.2013.01.002]
[6]杨亚东,李向东,王晓鸣.爆炸冲击波空中传播特征参量的优化拟合[J].爆破器材,2014,43(01):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
　YANG Yadong,LI Xiangdong,WANG Xiaoming.Optimum Fitting for Characteristic Parameters of Blast Shockwaves Traveling in Air[J].EXPLOSIVE MATERIALS,2014,43(02):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
[7]胡宏伟①,鲁忠宝②,郭炜①,等.水中爆炸的殉爆试验方法[J].爆破器材,2014,43(03):25.[doi:10.3969/j.issn.1001-8352.2014.03.006]
　HU Hongwei,LU Zhongbao,GUO Wei,et al.The Method of Sympathetic Detonation Experiment in Water[J].EXPLOSIVE MATERIALS,2014,43(02):25.[doi:10.3969/j.issn.1001-8352.2014.03.006]
[8]夏永乐①②,张志杰①②,翟永①②,等.基于FPGA+ARM+WIFI的炸药冲击波超压采集系统设计[J].爆破器材,2015,44(01):55.[doi:10.3969/j.issn.1001-8352.2015.01.013]
　XIA Yongle,ZHANG Zhijie,ZHAI Yong,et al.Design of Explosive Acquisition System for Shock Wave Overpressure Based on FPGA+ARM+WIFI[J].EXPLOSIVE MATERIALS,2015,44(02):55.[doi:10.3969/j.issn.1001-8352.2015.01.013]
[9]史长根,尤峻.双立式爆炸焊接新方法[J].爆破器材,2008,37(03):28.
　Shi Changgen,You Jun.New Technology of Double Vertical Explosive Welding[J].EXPLOSIVE MATERIALS,2008,37(02):28.
[10]严家佳,贾宪振,任松涛.一种传感器结构对水中爆炸冲击波影响的数值模拟研究[J].爆破器材,2016,45(01):7.[doi:10.3969/j.issn.1001-8352.2016.01.002]
　YAN Jiajia,JIA Xianzhen,REN Songtao.Numerical Simulation of Underwater Explosion Shock Wave Influenced by the Structure of One Sensor[J].EXPLOSIVE MATERIALS,2016,45(02):7.[doi:10.3969/j.issn.1001-8352.2016.01.002]

备注/Memo

备注/Memo:
收稿日期：2011-11-22
作者简介：徐全军（1966~），男，博士，教授，研究方向为爆炸力学。
更新日期/Last Update: 2012-04-27