[1]江国华,王文斌.电子雷管引火元件自动焊接检测一体机的设计[J].爆破器材,2017,46(05):56-59.[doi:10.3969/j.issn.1001-8352.2017.05.012]
　JIANG Guohua,WANG Wenbin.Design of an Automatic Welding and Test Machine to Produce Igniter of Electronic Detonator[J].EXPLOSIVE MATERIALS,2017,46(05):56-59.[doi:10.3969/j.issn.1001-8352.2017.05.012]
点击复制

电子雷管引火元件自动焊接检测一体机的设计()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
46
期数:
2017年05
页码:
56-59
栏目:
爆炸材料
出版日期:
2017-09-25

文章信息/Info

Title:
Design of an Automatic Welding and Test Machine to Produce Igniter of Electronic Detonator
文章编号:
5169
作者:
江国华；王文斌
贵州盘江民爆有限公司（贵州贵阳,551400）
Author(s):
JIANG Guohua;  WANG Wenbin
Guizhou Panjiang Industrial Explosive Co., Ltd. (Guizhou Guiyang, 551400)
关键词:
电子雷管; 引火元件; 自动焊接检测一体机
Keywords:
electronic detonator;  igniter;  automatic welding and test machine
分类号:
TD235.2+1
DOI:
10.3969/j.issn.1001-8352.2017.05.012
文献标志码:
A
摘要:
针对电子雷管生产效率不高的问题，设计了电子雷管引火元件自动焊接检测一体机，研究了在保证焊接质量的前提下药头与控制模块的焊接、脚线与控制模块的焊接、自动检测药头和自动检测电子引火元件技术。结果表明：药头与控制模块、脚线与控制模块4点同时锡焊技术稳定可靠，焊接质量较好；焊接完成后10发引火元件同时检测，大大提高了检测效率；该电子雷管引火元件焊测一体机运行稳定可靠，效率较高，达500 发/h。
Abstract:
To solve the production efficiency of electronic detonator, an automatic welding and test machine was designed and developed to produce igniter of the electronic detonator. Welding of charge head and control module, welding of wire and control module, automatic detection of charge head and electric igniter were studied when the welding quantity was assured. Results show that the four-point (charge head and control module, wire and control module) simultaneous soldering technology is stable and reliable, welding quality is better; After welding, simultaneous test of ten electronic igniter test was stable and reliable, and the detection efficiency was greatly improved. Operation of this machine is stable and reliable with high efficiency, and it can complete 500 rounds per hour.

参考文献/References:

［1］王文斌.电子雷管用电引火元件研究［D］.淮南：安徽理工大学,2015.
WANG W B. Study on fuse head of electronic detonator［D］.Huainan:Anhui University of Science and Techno logy,2015.
［2］刘超，李东涛，欧仙荣,等.电子雷管在紫金山金铜矿的应用［J］.爆破器材，2012，41（1）：35-37.
 LIU C，LI D T，OU X R ,et al. Application of electronic detonator in Zijinshan Gold Copper Mine［J］.Explosive Materials，2012，41（1）：35-37.
［3］MCKINSTRY R，FLOYD J，BARTLEY D．Electronic detonator performance evaluation［J］．Journal of Explosives Engineering,2002，19(3):12-14，16-21．
［4］郭华杰，袁绍国.电子雷管在地铁隧道爆破降振中的应用［J］.工程爆破，2016，22（1）：56-60.
GUO H J，YUAN S G.Application of electronic detonator reducing the vibration in subway tunnel blasting［J］.Engineering Blasting，2016，22（1）：56-60.
［5］田振农，孟祥栋，王国欣. 城区隧道电子雷管起爆错相减震机理分析［J］.振动与冲击，2012，31（21）：108-111.
 TIAN Z N ,MENG X D,WANG G X. Mechanism analysis of fault-phase vibration reduction for tunnel blasting initiated by electronic detonators in city area［J］.Journal of Vibration and Shock，2012，31（21）：108-111.
［6］赵根，吴新霞，周先平，等.电子雷管起爆系统及其在岩塞爆破中的应用［J］.爆破，2015，32（3）：91-94,149.
ZHAO G, WU X X,ZHOU X P, et al. Electronic detonator initiating system and application in rock plug blasting［J］.Blasting，2015，32（3）：91-94,149.
［7］EWICK D W, WALSH B M. Initiator with loosely packed ignition charge and method of assembly: U.S. 6408759［P］. 2002-06-25.
［8］玉团英，吕国栋，张梅红，等. 电子雷管引火元件专用点焊机的工艺参数与工装设计［J］.爆破器材，2014，43（5）：45-50.
YU T Y,Lǔ G D, ZHANG M H,et al. Technological parameters and design of spot welding machine dedicated for electronic detonator flash components production［J］.Explosive Materials，2014，43（5）：45-50.

相似文献/References:

[1]张晶威①②,刘星②,颜景龙②,等.一种电子雷管发火电路开关驱动的研究[J].爆破器材,2011,40(06):34.
　ZHANG Jingwei,LIU Xing,YAN Jinglong,et al.Research on Switch in the Ignition Circuit of Electron-delay Detonator[J].EXPLOSIVE MATERIALS,2011,40(05):34.
[2]刘超①,李东涛②,欧仙荣①,等.电子雷管在紫金山金铜矿的应用[J].爆破器材,2012,41(01):35.
　LIU Chao,LI Dongtao,OU Xianrong,et al.Application of Electronic Detonator in Zijinshan Gold Copper Mine[J].EXPLOSIVE MATERIALS,2012,41(05):35.
[3]欧仙荣.铜芯脚线储能焊接工艺方法改进[J].爆破器材,2012,41(04):23.
　OU Xianrong.The Improvement of Energystored Welding Process on Copper Wire[J].EXPLOSIVE MATERIALS,2012,41(05):23.
[4]倪磊,唐胜,赵鹏飞,等.储能式焊线机焊线质量影响因素分析[J].爆破器材,2013,42(03):45.[doi:10.3969/j.issn.1001-8352.2013.03.011]
　NI Lei,TANG Sheng,ZHAO Pengfei,et al.Quality Analysis on the Welding Wire for Energypreserving Welding Machine[J].EXPLOSIVE MATERIALS,2013,42(05):45.[doi:10.3969/j.issn.1001-8352.2013.03.011]
[5]李顺波①,杨军②,李长军③.基于精确延时的基坑开挖爆破振动控制研究[J].爆破器材,2015,44(06):9.[doi:10.3969/j.issn.1001-8352.2015.06.003]
　LI Shunbo,YANG Jun,LI Changjun.Control of Blasting Vibration in Foundation Pit Excavation Based on the Precise Time Delay[J].EXPLOSIVE MATERIALS,2015,44(05):9.[doi:10.3969/j.issn.1001-8352.2015.06.003]
[6]王文斌①,王兴平①,张阳②.一种用于电子雷管的电点火头的研究[J].爆破器材,2016,45(02):43.[doi:10.3969/j.issn.1001-8352.2016.02.010]
　WANG Wenbin,WANG Xingping,ZHANG Yang.Research of a Fuse Head Used for the Electronic Detonator[J].EXPLOSIVE MATERIALS,2016,45(05):43.[doi:10.3969/j.issn.1001-8352.2016.02.010]
[7]张文洲①,孙磊②.钛粉对电子雷管电引火药头性能的影响[J].爆破器材,2019,48(02):43.[doi:10.3969/j.issn.1001-8352.2019.02.008]
　ZHANG Wenzhou,SUN Lei.Effect of Titanium Powder on Performances of Electric Fusehead of Electric Detonator[J].EXPLOSIVE MATERIALS,2019,48(05):43.[doi:10.3969/j.issn.1001-8352.2019.02.008]
[8]周慈亮,汤有富,郑琪,等.某型电子雷管在隧道控制爆破中的应用[J].爆破器材,2021,50(03):51.[doi:10.3969/j.issn.1001-8352.2021.03.010]
　ZHOU Ciliang,TANG Youfu,ZHENG Qi,et al.Application of an Electronic Detonator in Tunnel Controlled Blasting[J].EXPLOSIVE MATERIALS,2021,50(05):51.[doi:10.3969/j.issn.1001-8352.2021.03.010]
[9]刘忠民①,杨年华②③,石磊①,等.电子雷管小孔距爆破拒爆试验研究[J].爆破器材,2021,50(05):39.[doi:10.3969/j.issn.1001-8352.2021.05.007]
　LIU Zhongmin,YANG Nianhua,SHI Lei,et al.Experimental Study on Misfire in Small Hole-Space Blasting of Electronic Detonator[J].EXPLOSIVE MATERIALS,2021,50(05):39.[doi:10.3969/j.issn.1001-8352.2021.05.007]
[10]孙冰①,宋良灵①,曾晟②,等.电子雷管和导爆管雷管起爆的振动信号时频特性对比[J].爆破器材,2022,51(01):46.[doi:10.3969/j.issn.1001-8352.2022.01.009]
　SUN Bing,SONG Liangling,ZENG Sheng,et al.Comparison of Time-Frequency Characteristics of Vibration Signals Detonated by Electronic Detonators and Nonel Detonators[J].EXPLOSIVE MATERIALS,2022,51(05):46.[doi:10.3969/j.issn.1001-8352.2022.01.009]
[11]玉团英,吕国栋,张梅红,等.电子雷管引火元件专用点焊机的工艺参数与工装设计[J].爆破器材,2014,43(05):45.[doi:10.3969/j.issn.1001-8352.2014.05.010]
　YU Tuanying,LV Guodong,ZHANG Meihong,et al.Technological Parameters and Design of Spot Welding Machine Dedicated for Electronic Detonator Flash Components Production[J].EXPLOSIVE MATERIALS,2014,43(05):45.[doi:10.3969/j.issn.1001-8352.2014.05.010]

备注/Memo

备注/Memo:
收稿日期：2017-01-28
作者简介：江国华（1965－），男，高级工程师，主要从事民用爆破器材研究。E-mail：511175670@qq.com
更新日期/Last Update: 2017-09-25