[1]刘庆,陈文基,陈姗姗,等.新型数码电子雷管及其起爆系统的开发与应用[J].爆破器材,2017,46(06):43-47.[doi:10.3969/j.issn.1001-8352.2017.06.009]
　LIU Qing,CHEN Wenji,CHEN Shanshan,et al.Development and Application of a New Type of Digital Electronic Detonator and Its Initiating System[J].EXPLOSIVE MATERIALS,2017,46(06):43-47.[doi:10.3969/j.issn.1001-8352.2017.06.009]
点击复制

新型数码电子雷管及其起爆系统的开发与应用()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
46
期数:
2017年06
页码:
43-47
栏目:
爆炸材料
出版日期:
2017-11-15

文章信息/Info

Title:
Development and Application of a New Type of Digital Electronic Detonator and Its Initiating System
文章编号:
5162
作者:
刘庆; 陈文基; 陈姗姗; 周桂松; 杜华善; 李晓虎; 吴欣欣
中国葛洲坝集团易普力股份有限公司（重庆，401121）
Author(s):
LIU Qing;  CHEN Wenji;  CHEN Shanshan;  ZHOU Guisong;  DU Huashan;  LI Xiaohu;  WU Xinxin
Explosive Co., Ltd., China Gezhouba Group (Chongqing, 401121)
关键词:
数码电子雷管; 起爆系统; 延期时间; 炮孔定位
Keywords:
digital electronic detonator;  initiating system;  delay time;  location of blasting holes
分类号:
TD235.2+2
DOI:
10.3969/j.issn.1001-8352.2017.06.009
文献标志码:
A
摘要:
针对现有数码电子雷管及其起爆系统在爆破作业现场使用中存在操作不便、输入延期时间繁琐和易错的问题，通过炮孔定位和数据采集技术，研发了新型数码电子雷管及其起爆系统。在使用过程中，可识别炮孔位置，自动匹配炮孔和雷管编号,自动写入延期时间，快速建立炮孔位雷管ID码延期时间三者的关系，各功能独立分开，但又相互配合，减少了误操作，提高了爆破作业现场自动化水平，增强了新型数码电子雷管起爆系统的安全性和可操作性。
Abstract:
In the application of current digital electronic detonator and its initiating system, there are some issues including inconvenience of manipulation, complexity in inputting delay time information and fallibility. A new digital electronic detonator and its initiating system were developed in combining the location of blasting holes and data acquisition technology. This new system could not only automatically identify the position of blasting hole, match the coding numbers between hole and detonators and encode delay time, but also rapidly associate the blasting holes location with ID numbers of detonators and delay time information. In addition, each function is independent and can coordinate well as a whole. Therefore, the new system can reduce handling mistakes, enhance the automation level of blasting operation and improve application safety and efficiency of current blasting system.

参考文献/References:

［1］张力.数码电子雷管的发展及应用研究［J］.采矿技术，2014，14（5）：68-69,165.
［2］工业和信息化部.工业数码电子雷管：WJ9085—2015［S］.北京：中国标准出版社，2015.
 Ministry of Industry and Information Technology. Industrial digital electronic detonators：WJ9085—2015 ［S］. Beijing: China Standard Press, 2015.
［3］周桂松,江小波,向华仙.I-Kon电子起爆系统在三峡RCC围堰爆破拆除中的应用［J］.爆破器材,2007,36(6):23-26.
 ZHOU G S, JIANG X B, XIANG H X. Application of I-Kon electronic blasting system in the demolition of Sanxia three gorge RCC cofferdam［J］.Explosive Materials,2007, 36(6):23-26.
［4］田小宝.澳瑞凯数码电子雷管起爆系统优势及应用案例［J］.矿业装备,2012(10):98-101.
［5］颜景龙.铱钵起爆系统的安全性分析与试验［J］.工程爆破，2008,14(2):70-72,24.
 YAN J L. Safety analysis and experiments of the ebtronic blasting system ［J］. Engineering Blasting,2008,14(2):70-72,24.
［6］颜景龙.中国电子雷管技术与应用［J］.中国工程科学，2015，17（1）：36-41.
YAN J L. Technology and application of chinese electronic detonator［J］.Engineering Sciences, 2015, 17(1):36-41.
［7］赵根,吴新霞,周先平,等.电子雷管起爆系统及其在岩塞爆破中的应用［J］.爆破,2015,32(3):91-94.
ZHAO G, WU X X, ZHOU X P,et al. Electronic detonator initiating system and application in rock plug blasting［J］. Blasting,2015,32(3): 91-94.
［8］周桂松,杜华善,陈文基，等.可识别炮孔位置的数码电子雷管起爆系统及控制方法:CN103115537A［P］.2013-05-22.
［9］爆破安全规程:GB6722—2014［S］.北京：中国标准出版社，2014.
Safety regulations for blasting: GB6722—2014［S］. Beijing: China Standard Press, 2014.
［10］刘庆,陈文基,陈姗姗,等.高安全性电子雷管起爆系统及其方法：CN106017239A［P］.2016-10-12.

相似文献/References:

[1]李春军①,崔广强②,陈士海②,等.数码电子雷管深水起爆性能试验研究[J].爆破器材,2022,51(04):47.[doi:10.3969/j.issn.1001-8352.2022.04.008]
　LI Chunjun,CUI Guangqiang,CHEN Shihai,et al.Experimental Study on Deep Water Initiation Performance of Digital Electronic Detonator[J].EXPLOSIVE MATERIALS,2022,51(06):47.[doi:10.3969/j.issn.1001-8352.2022.04.008]
[2]李仕洪,李帆,杨玲玲,等.基础雷管自动收集与分发系统的设计[J].爆破器材,2023,52(05):25.[doi:10.3969/j.issn.1001-8352.2023.05.005]
　LI Shihong,LI Fan,YANG Lingling,et al.Design of Automatic Collection and Distribution System of Plain Detonator[J].EXPLOSIVE MATERIALS,2023,52(06):25.[doi:10.3969/j.issn.1001-8352.2023.05.005]

备注/Memo

备注/Memo:
收稿日期：2017-03-20
作者简介：刘庆(1990－)，男，本科双学位，助理工程师，主要从事火工品生产工艺研究。E-mail:liuq@expl.cn
更新日期/Last Update: 2017-11-14