[1]屈可朋,王晓峰,何超,等.撞击条件下分步压装装药的点火机理[J].爆破器材,2016,45(03):22-25，30.[doi:10.3969/j.issn.1001-8352.2016.03.005]
　QU Kepeng,WANG Xiaofeng,HE Chao,et al.Ignition Mechanism of Step Press Loading Charge under Impact Loading[J].EXPLOSIVE MATERIALS,2016,45(03):22-25，30.[doi:10.3969/j.issn.1001-8352.2016.03.005]
点击复制

撞击条件下分步压装装药的点火机理()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
45
期数:
2016年03
页码:
22-25，30
栏目:
基础理论
出版日期:
2016-05-13

文章信息/Info

Title:
Ignition Mechanism of Step Press Loading Charge under Impact Loading
文章编号:
5057
作者:
屈可朋; 王晓峰; 何超; 王世英
西安近代化学研究所（陕西西安，710065）
Author(s):
QU Kepeng;  WANG Xiaofeng;  HE Chao; WANG Shiying
Xi’an Modern Chemistry Research Institute (Xi’an,710065)
关键词:
含能材料; 分步压装装药; 撞击试验; 点火机理
Keywords:
energetic materials;  step-press-loading charge;  impact test;  ignition mechanism
分类号:
TJ55；O347.3
DOI:
10.3969/j.issn.1001-8352.2016.03.005
文献标志码:
A
摘要:
利用大型落锤加载装置对不同密度分布状态的药柱进行了撞击加载试验，在分析试验前、后药柱中应力和密度分布状态变化的基础上，讨论了分步压装装药的点火机制。结果表明：药柱的力学响应与其内部密度分布情况密切相关，均匀密度药柱所能承受的最大载荷明显高于非均匀密度药柱。在撞击加载过程中，药柱内部径向密度差引起的剪切流动是导致分步压装装药点火的重要原因。
Abstract:
Impact tests of explosive samples with different density distributions were carried out using drop hammer. Based on the analysis of stress and density distribution before and after impact tests, ignition mechanism of step press loading charge was discussed. The results show that the mechanical response of explosive samples are dependent with the inner density distribution, uniform density sample with uniform density distribution can endure bigger load stress than sample with non-uniform density distribution.Shear flow caused by the radial density difference is one of the important reasons causing step press loading charge ignition during the impact loading.

参考文献/References:

［1］吴涛,直小松,孙强.分步压装高能混合炸药在战斗部装药中的应用研究［J］.国防技术基础,2009(6):43-46.［2］高立龙,牛余雷,王浩,等.典型炸药柱的400kg落锤撞击感度特性分析［J］.含能材料,2011,19(4):428-431. GAO L L,NIU Y L,WANG H,et al. Analysis of impact sensitivity characteristics for typical explosive cylinder ［J］. Chinese Journal of Energetic Materials, 2011,19(4):428-431.［3］王世英,胡焕性.炸药装药工艺对发射安全性的影响［J］.火炸药学报,2003,26(1):20-22. WANG S Y,HU H X.The effect of different charging processes on the launch safety［J］. Chinese Journal of Explosives & Propellants, 2003,26(1):20-22.［4］王淑萍.撞击作用下炸药装药的尺寸效应研究［J］.火炸药学报,2000(4):18-20. WANG S P.Study on size effect of projectile filling under the impact［J］. Chinese Journal of Explosives & Propellants, 2000(4): 18-20.［5］王淑萍,王晓峰,金大勇.压制密度及密度均匀性对装药撞击安全性的影响［J］.含能材料,2011,19 (6): 705-708. WANG S P, WANG X F, JIN D Y. Influence of pressed explosive charges density and its distribution on impact safety ［J］. Chinese Journal of Energetic Materials, 2011, 19(6):705-708.［6］JOSHI V S,RICHMOND C T. Characterization of ignition threshold of PBXN-110 using hybrid drop weight-Hopkinson bar ［C］//14th Detonation Symposium Proceeding. Idaho:Office of Naval Research, 2010:1254-1263. ［7］CHEN P W, HUANG F L, DAI K D,et al. Detection and characterization of long-pulse low-velocity impact damage in plastic bonded explosives［J］.International Journal of Impact Engineering,2005,31:497-508.［8］王淑萍.分步压装装药的安全性分析［J］.火炸药学报,2006,29(2):23-25. WANG S P. The safety analysis of the steppressloading charges［J］. Chinese Journal of Explosives & Propellants, 2006,29(2):23-25.［9］梁增友. 炸药冲击损伤与起爆特性［M］. 北京: 电子工业出版社, 2009.［10］KRZEWINSKI B,BLAKE O,LIEB R,et al. Shear deformation and shear initiation of explosives and propellants［C］// Proceedings of the 12th International Detonation Symposium. San Diego, California, USA,2002:1548-1556.［11］FIELD J E, PALMER S J P, POPE P H, et al. Mechanical-properties of PBXs and their behavior during drop weight tests［C］// Proceedings of the 8th International Detonation Symposium. Albuquerque, New Mexico, 1985: 635-644.

相似文献/References:

[1]薛艳,任小明,解瑞珍,等.硅基含能材料爆炸性能研究[J].爆破器材,2011,40(05):12.
　XUE Yan,REN Xiaoming,XIE Ruizhen,et al.Explosion Properties of Nanosiliconbased Energetic Materials[J].EXPLOSIVE MATERIALS,2011,40(03):12.
[2]张涛,陈明华,贾昊楠,等.热分解动力学在含能材料中的应用[J].爆破器材,2013,42(06):52.[doi:10.3969/j.issn.1001-8352.2013.06.011]
　ZHANG Tao,CHEN Minghua,JIA Haonan,et al.Application of Thermal Decomposition Kinetics in Energetic Materials[J].EXPLOSIVE MATERIALS,2013,42(03):52.[doi:10.3969/j.issn.1001-8352.2013.06.011]
[3]陈言坤①,甄建伟①,武慧恩②,等.粒状发射药动态破碎研究进展[J].爆破器材,2014,43(01):41.[doi:10.3969/j.issn.1001-8352.2014.01.009]
　CHEN Yankun,ZHEN Jianwei,WU Huien,et al.Research Progress of Dynamic Fracture of Granular Propellant[J].EXPLOSIVE MATERIALS,2014,43(03):41.[doi:10.3969/j.issn.1001-8352.2014.01.009]
[4]马宁,苏杨,秦能,等.1L慢烤燃装置温场分布数值模拟与试验研究[J].爆破器材,2014,43(03):14.[doi:10.3969/j.issn.1001-8352.2014.03.004]
　MA Ning,SU Yang,QIN Neng,et al.Numerical Simulation and Experimental Study of Temperature Field Distribution in 1L Slow Cook-off Device[J].EXPLOSIVE MATERIALS,2014,43(03):14.[doi:10.3969/j.issn.1001-8352.2014.03.004]
[5]葛亚庆,许田田,杨君龙,等.5-氨基四唑/氧化铜气体发生剂燃烧性质的研究[J].爆破器材,2014,43(06):35.[doi:10.3969/j.issn.1001-8352.2014.06.008]
　GE Yaqing,XU Tiantian,YANG Junlong,et al.Study on Combustion Performance of 5Aminotetrazole/Copper Oxide Gasgenerating Agent[J].EXPLOSIVE MATERIALS,2014,43(03):35.[doi:10.3969/j.issn.1001-8352.2014.06.008]
[6]鲁学峰①,卫延安①②.N,N-双四唑胺的合成工艺改进与研究[J].爆破器材,2015,44(02):14.[doi:10.3969/j.issn.1001-8352.2015.02.004]
　LU Xuefeng,WEI Yanan.Study and Improvement of the Synthesis of N,N-Bis(1H-tetrazol-5-yl)amine[J].EXPLOSIVE MATERIALS,2015,44(03):14.[doi:10.3969/j.issn.1001-8352.2015.02.004]
[7]盛涤伦,陈利魁,朱雅红,等.耐高温起爆药叠氮化镉的合成与性能研究[J].爆破器材,2015,44(03):12.[doi:10.3969/j.issn.1001-8352.2015.03.003]
　SHENG Dilun,CHEN Likui,ZHU Yahong,et al.Synthesis and Performance of a Primary Explosive Resisting High Temperature Named Cadmium Azide[J].EXPLOSIVE MATERIALS,2015,44(03):12.[doi:10.3969/j.issn.1001-8352.2015.03.003]
[8]屈可朋,沈飞,肖玮,等.一种RDX基PBX炸药力学性能和本构关系研究[J].爆破器材,2015,44(03):31.[doi:10.3969/j.issn.1001-8352.2015.03.007]
　QU Kepeng,SHEN Fei,XIAO Wei,et al.Mechanical Behavior and Constitutive Model of one RDXbased PBX Explosive[J].EXPLOSIVE MATERIALS,2015,44(03):31.[doi:10.3969/j.issn.1001-8352.2015.03.007]
[9]李家宽,马小霞,胡艳,等.KNO3/GO复合含能材料的制备与表征[J].爆破器材,2016,45(02):1.[doi:10.3969/j.issn.1001-8352.2016.02.001]
　LI Jiakuan,MA Xiaoxia,HU Yan,et al.Preparation and Characterization of KNO3/GO Composite Energetic Materials[J].EXPLOSIVE MATERIALS,2016,45(03):1.[doi:10.3969/j.issn.1001-8352.2016.02.001]
[10]刘利钊①,靳昕②,王鹏程①,等.N,N-二（三硝基乙基）硝胺（BTNNA）的合成工艺优化及热性能[J].爆破器材,2016,45(03):47.[doi:10.3969/j.issn.1001-8352.2016.03.010]
　LIU Lizhao,JIN Xin,WANG Pengcheng,et al.Synthesis Improvement and Thermal Properties of Bis(2,2,2-Trinitroethyl)-Nitramine (BTNNA)[J].EXPLOSIVE MATERIALS,2016,45(03):47.[doi:10.3969/j.issn.1001-8352.2016.03.010]

备注/Memo

备注/Memo:
收稿日期：2015-12-28
基金项目：国家重大基础研究项目(0040105)
作者简介：屈可朋（1983－），男，硕士，工程师，主要从事弹药材料动态力学响应及安全性的研究。E-mail：155301498@qq.com
更新日期/Last Update: 2016-05-13