[1]岳纪炜,陈玉,侯斯婕,等.工业炸药成品装车位的隔爆设计[J].爆破器材,2017,46(04):25-29.[doi:10.3969/j.issn.1001-8352.2017.04.005]
　YUE Jiwei,CHEN Yu,HOU Sijie,et al.Explosion-interrupted Design for Product Loading Unit of Industrial Explosives[J].EXPLOSIVE MATERIALS,2017,46(04):25-29.[doi:10.3969/j.issn.1001-8352.2017.04.005]
点击复制

工业炸药成品装车位的隔爆设计()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
46
期数:
2017年04
页码:
25-29
栏目:
爆炸材料
出版日期:
2017-06-14

文章信息/Info

Title:
Explosion-interrupted Design for Product Loading Unit of Industrial Explosives
文章编号:
5159
作者:
岳纪炜; 陈玉; 侯斯婕; 乔枫革
中国兵器工业规划研究院（北京，100053）
Author(s):
YUE Jiwei;  CHEN Yu;  HOU Sijie;  QIAO Fengge
Planning and Research Institute, Norinco Group (Beijing, 100053)
关键词:
隔爆墙; 殉爆; 钢砼墙; 防护土堤; 工业炸药生产线
Keywords:
explosion-interrupted wall;  sympathetic detonation;  R.C. (reinforced concrete) wall;  protection earth mound;  production line of industrial explosives
分类号:
TQ560.8;X932
DOI:
10.3969/j.issn.1001-8352.2017.04.005
文献标志码:
A
摘要:
对于一些工业炸药生产线老厂区，由于厂区内建设用地紧张、内部距离受限等原因，无法在原有生产线基础上单独设置成品中转站台或成品中转库时，需要找到一种可靠措施,在保证转运车辆中工业炸药与生产工房内存药不相互殉爆的前提下实现工房土堤外装车。通过某公司的隔爆墙设计实例得出,采用两层钢砼墙板中间夹砂的组合隔爆墙替代防护土堤，占地面积小,能够起到抗爆、防殉爆效果，可以有效阻止生产工房或成品装车位有一方爆炸时导致另一方主体结构遭受严重破坏，是解决工业炸药生产企业老厂区工业炸药生产线防护土堤外装车的有效途径之一。
Abstract:
In some industrial explosives production lines, due to reasons, such as the limitation of old factory construction landing and the internal distance, the finished transit station or store cannot be set separately based on the original production line. In this case, it needs to find a reliable measure to ensure that industrial explosives could be loaded outside protective earth mound for the workshop building, which should be under the premise of no interaction between loaded explosives in the transportation truck and explosives in the workshop building. In this article, explosion-interrupted wall was designed in a factory to conclude that combined explosion-interrupted wall with two side R.C.(reinforced concrete) slabs filled with sand is a better choice to replace protection earth embankment. It would occupy less area and has better explosioninterrupted performance and sympathetic detonation prevention performance, which indicates it could prevent workshop building or production loading place from suffering serious structure damage caused by explosion of the other side. It is one of efficient solutions to explosion-interrupted design for the loading place in old factory.

参考文献/References:

［1］中华人民共和国建设部，中华人民共和国国家质量监督检验检疫总局.民用爆破器材工程设计安全规范：GB50089—2007［S］.北京:中国计划出版社,2007.
Ministry of Construction of the Peoples Republic of China, General Administration of Quality Supervision, Inspection and Quarantine of the Peoples Republic of China.Safety code for design of engineering of civil explosives materials:GB50089—2007［S］.Beijing: China Planning Press,2007.
［2］北京工业学院八系《爆炸及其作用》编写组.爆炸及其作用［M］.北京：国防工业出版社,1979.
［3］何源,何勇,潘绪超,等. 含能破片冲击引爆屏蔽炸药研究［J］.南京理工大学学报,2011,35(2):187-193.
HE Y,HE Y,PAN X C,et al. Initiation of shielded high explosive impacted by e
nergetic fragment［J］. Journal of Nanjing University of Science and Technology,2011,35(2):187-193.
［4］美国国防部（DOD）.火炸药和弹药安全标准:DOD6055.9—STD［S］.美国：美国国防部，2004.
 DOD .The safety standards of fire explosives and ammunition：DOD6055.9—STD［S］.USA:DOD,2004.
［5］王泽溥,郑志良.爆炸及其防护［M］.北京：兵器工业出版社，2008.
［6］何荣,陈嘉陵.包装工房炸药装车问题的探讨［J］.爆破器材,2008,37(3):19-21. 
 HE R,CHEN J L. The study of problem for entrucking explosive in packing building［J］.Explosive Materials,2008,37(3):19-21.
［7］张国顺,王泽溥.火炸药及其制品燃烧爆炸事故及其预防措施［M］.北京：兵器工业出版社，2009.
［8］董文学,李素灵,白春光,等.乳化炸药生产工房计算药量探讨［C］//中国爆破器材行业协会.乳化炸药安全技术交流会资料汇编.北京，2013: 367-372.
［9］韩瑞,高晓莉,张志山,等.乳化炸药生产线工程设计中安全技术问题的探讨［C］//中国爆破器材行业协会.乳化炸药安全技术交流会资料汇编.北京，2013: 231-238.
［10］中华人民共和国住房和城市建设部，中华人民共和国国家质量监督检验检疫总局.化工企业总图运输设计规范:GB50489—2009［S］.北京:中国计划出版社，2009.
 Ministry Housing and Urban-rural Development of the Peoples Republic of China, General Administration of Quality Supervision, Inspection and Quarantine of the Peoples Republic of China. Code for design of general plot plan and transportation of chemical industrial enterprises:GB50489—2009［S］. Beijing: China Planning Press,2009.
［11］中华人民共和国住房和城市建设部，中华人民共和国国家质量监督检验检疫总局.工业企业总平面设计规范:GB50198—2012［S］.北京:中国计划出版社,2012. 
 Ministry Housing and Urban-rural Development of the Peoples Republic of China, General Administration of Quality Supervision, Inspection and Quarantine of the Peoples Republic of China.Code for design of general layout of industrial enterprises:GB50198—2012［S］.Beijing: China Planning Press,2012.
［12］胡宏伟,冯海云,肖川,等.基于顶盖举起试验的炸药内爆炸性能评估［J］.火炸药学报,2016,39(3):53-57.
HU H W,FENG H Y,XIAO C,et al.Evaluation of the internal blast performance of explosives based on roof lift test［J］.Chinese Journal of Explosives & Propellants,2016,39(3):53-57.
［13］中华人民共和国住房和城市建设部，中华人民共和国国家质量监督检验检疫总局.混凝土结构设计规范:GB50010—2010［S］.北京:中国建筑工业出版社,2015.
Ministry Housing and Urban-rural Development of the Peoples Republic of China, General Administration of Quality Supervision, Inspection and Quarantine of the Peoples Republic of China.Code for design of concrete structures: GB50010—2010［S］. Beijing: China Architecture & Building Press,2015.
［14］中华人民共和国住房和城市建设部，中华人民共和国国家质量监督检验检疫总局.抗爆间室设计规范:GB50907—2013 ［S］. 北京:中国计划出版社,2013.
Ministry Housing and Urban-rural Development of the Peoples Republic of China, General Administration of Quality Supervision, Inspection and Quarantine of the Peoples Republic of China. Code for design of blast resistant chamber structures:GB 50907—2013 ［S］.Beijing: China Planning Press,2013.

相似文献/References:

[1]胡宏伟①,鲁忠宝②,郭炜①,等.水中爆炸的殉爆试验方法[J].爆破器材,2014,43(03):25.[doi:10.3969/j.issn.1001-8352.2014.03.006]
　HU Hongwei,LU Zhongbao,GUO Wei,et al.The Method of Sympathetic Detonation Experiment in Water[J].EXPLOSIVE MATERIALS,2014,43(04):25.[doi:10.3969/j.issn.1001-8352.2014.03.006]
[2]汪成运,魏志丰,何鹏鹏.炸药殉爆的研究进展与展望[J].爆破器材,2022,51(06):1.[doi:10.3969/j.issn.1001-8352.2022.06.001]
　WANG Chengyun,WEI Zhifeng,HE Pengpeng.Research Progress of Sympathetic Detonation of Explosives[J].EXPLOSIVE MATERIALS,2022,51(04):1.[doi:10.3969/j.issn.1001-8352.2022.06.001]

备注/Memo

备注/Memo:
收稿日期：2017-03-13
作者简介：岳纪炜(1981－),女，硕士，高级工程师，主要从事民爆工程设计。E-mail:yjw2009@163.com
通信作者：乔枫革（1958－），男，博士，研究员级高工，主要从事民爆工程设计。E-mail:fg_qiao@aliyun.com
更新日期/Last Update: 2017-06-13