[1]吴鹏①,刘静平①②,陈相③,等.温度冲击对车载乳胶基质安全性的影响[J].爆破器材,2016,45(01):56-59.[doi:10.3969/j.issn.1001-8352.2016.01.013]
 WU Peng,LIU Jingping,CHEN Xiang,et al.Effect of Temperature Shock on the Safety of Vehicle Emulsion Matrix[J].EXPLOSIVE MATERIALS,2016,45(01):56-59.[doi:10.3969/j.issn.1001-8352.2016.01.013]
点击复制

温度冲击对车载乳胶基质安全性的影响()
分享到:

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
45
期数:
2016年01
页码:
56-59
栏目:
安全与测试
出版日期:
2016-01-29

文章信息/Info

Title:
Effect of Temperature Shock on the Safety of Vehicle Emulsion Matrix
文章编号:
4999
作者:
吴鹏刘静平①②陈相蒋伟卜令涛徐森①②刘大斌
①南京理工大学化工学院(江苏南京,210094)
②国家民用爆破器材质量监督检验中心(江苏南京,210094)
③上海出入境检验检疫局(上海,200135)
④山东天宝化工股份有限公司(山东临沂,273300)
Author(s):
WU Peng LIU Jingping①② CHEN Xiang JIANG Wei BU Lingtao XU Sen①② LIU Dabin 
①School of Chemical Engineering, Nanjing University of Science and Technology (Jiangsu Nanjing, 210094)
②National Quality Supervision and Inspection Center for Industrial Explosive Materials (Jiangsu Nanjing, 210094)
③Shanghai Entryexit Inspection and Quarantine Bureau (Shanghai, 200135)
④Shandong Tianbao Chemical Industry Co., Ltd. (Shandong Linyi, 273300)
关键词:
老化乳胶基质冲击波感度爆炸特性
Keywords:
aging emulsion matrix shock wave sensitivity explosive properties
分类号:
TD235.2+1
DOI:
10.3969/j.issn.1001-8352.2016.01.013
文献标志码:
A
摘要:
为了研究温度冲击对车载乳胶基质安全性的影响, 分别采用ANE隔板试验、克南试验、烤燃试验研究了经过不同老化周期处理的车载乳胶基质安全特性。隔板试验中,样品1#和2#的验证板严重变形但未穿孔,样品3#的验板穿孔,表明随着老化周期的增加,乳胶基质对冲击波作用更敏感。克南试验中, 样品1#和2#的试验钢管无显著变化,样品3#的试验钢管发生了爆炸,表明随着老化周期的增加,乳胶基质在强加热作用下变得更敏感。烤燃试验中,样品1#、2#和3#达到最高温度的时间分别为1 340 s、1 020 s和700 s,即随着老化周期的增加,乳胶基质受热发生热分解的速度变快。
Abstract:
To study of temperature shock aging effect on the safety of vehicle emulsion matrix, the safety characteristics of vehicle emulsion matrix in different aging cycles were investigated by ANE gap test, Koenen test and the Baking test respectively. In ANE gap test, verification boards of sample 1# and sample 2# are domed but not holed, whereas verification boards of sample 3# are holed. The results of ANE gap test show that with the increase of the aging cycles, emulsion matrix is more sensitive to the shock wave. In Koenen test, the test tubes of sample 1# and sample 2# are unchanged, while the test tube of the sample 3# is fragmented. It indicates that with the increase of the aging cycles, emulsion matrix is more sensitive to the effect of intense heat under confinement. In Baking test, the time required for sample 1#, sample 2# and sample 3# reaching to the maximum temperature are 1 340 s, 1 020 s and 700 s respectively. The results of Baking test indicates that with the increase of aging cycles, the thermal decomposition rate of the emulsion matrix rises obviously.

参考文献/References:

[1]吕春绪. 工业炸药理论[M]. 北京:兵器工业出版社,2003.
[2]何劲松, 何欣扬. 对乳化基质快速敏化的几点认识[J]. 爆破器材,2008, 37(1):12-14. 
 HE J S,HE X Y. Some cognition on fast sensitization of emulsified bases[J]. Explosive Materials,2008,37(1): 12-14.
[3]王尹军,汪旭光. 乳胶基质抗冲击波性能研究[J]. 兵工学报, 2005, 26(5): 697-701.
 WANG Y J,WANG X G. A study on the antishockwave performance of emulsion matrix[J]. Acta Armamentarii, 2005, 26(5): 697-701.
[4]赵超,徐森. 乳胶基质热失控温度的研究[J]. 煤矿爆破, 2013(4):24-26.
ZHAO C,XU S. Investigation on thermal runaway temperature of emulsion matrix[J]. Coal Mine Blasting, 2013(4):24-26.
[5] TSENG J M, SHU C M, GUPTA J P, et al. Evaluation and modeling runaway reaction of methyl ethyl ketone peroxide mixed with nitric acid[J]. Industrial and Engineering Chemistry Research,2007,46(25):8738-8745.
[6] 颜事龙,陈锋,马志刚. 乳化炸药基质燃烧机理的研究[J]. 爆破器材,2006,35(6):7-10.
YAN S L,CHEN F,MA Z G. Research on the burning mechanism of emulsion matrix[J]. Explosive Materials, 2006,35(6):7-10.
[7]徐森,陈相,段瑞坤,等. 硝酸铵乳胶在持续受热条件下的热失控特性[J]. 化工学报,2014,65(3):1135-1141.
 XU S, CHEN X, DUAN R K,et al. Developing process of thermal runaway for ammonium nitrate emulsion under continuous heating[J].CIESC Journal, 2014, 65(3):1135-1141.
[8] TAN L, WU Q J, CHEN X, et al.The effects of sodium chloride on the explosive performance of ammonium nitrate[J]. Journal of Thermal Analysis and Calorimetry,2014,115(2):1759-1766.
[9] United Nations,Committee of Experts on the Transport of Dangerous Goods.Recommendations on the transport of dangerous goods:model regulations[M].16th ed. New York and Geneva: United Nations Publications, 2009.
[10] United Nations,Committee of Experts on the Transport of Dangerous Goods. Recommendations on the transport of dangerous goodsmanual of tests and criteria [M]. 5th ed. New York and Geneva: United Nations Publications,2009.

相似文献/References:

[1]杨长青,王有会.浅谈影响乳胶基质物理敏化密度的因素[J].爆破器材,2011,40(02):20.
 YANG Changqing,WANG Youhui.Brief Discussion on the Factors Affecting Physical Sensitization Density of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2011,40(01):20.
[2]徐志祥,叶志文,刘大斌,等.乳胶基质流动模型及其温度和速度的分布研究[J].爆破器材,2009,38(02):5.
 XU zhixiang,YE zhiwen,LIU Dabin,et al.Study on Flow Model and Distribution of Temperature and Pressure of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2009,38(01):5.
[3]陈飞,邢光武,甘德淮,等.敞开式无动力冷却器的研制[J].爆破器材,2011,40(04):12.
 CHEN Fei,XING Guangwu,GAN Dehuai,et al.Development of Open Unpowered Cooler[J].EXPLOSIVE MATERIALS,2011,40(01):12.
[4]陈飞,邢光武,江志华,等.多元易发泡型复合乳化剂乳化炸药的制备[J].爆破器材,2011,40(06):23.
 CHEN Fei,XING Guangwu,JIANG Zhihua,et al.Preparation of Emulsion Explosive Containing Multielement Foaming Composite Emulsifying Agent[J].EXPLOSIVE MATERIALS,2011,40(01):23.
[5]开俊俊,申卫峰,雷鹏灿,等.乳胶基质微乳液低温快速发泡技术的研究[J].爆破器材,2013,42(02):31.[doi:10.3969/j.issn.1001-8352.2013.02.008]
 KAI Junjun,SHEN Weifeng,LEI Pengcan,et al.Research on the Low Temperature Rapid Foaming Technology of Microemulsion for Emulsion Matrix[J].EXPLOSIVE MATERIALS,2013,42(01):31.[doi:10.3969/j.issn.1001-8352.2013.02.008]
[6]迟洪鹏,李鑫,查正清,等.乳胶基质运输车储存罐体及输送系统设计[J].爆破器材,2015,44(01):28.[doi:10.3969/j.issn.10018352.2015.01.007]
 CHI Hongpeng,LI Xin,ZHA Zhengqing,et al.Design of Storage Tank and Conveying System of Emulsion Matrix Truck[J].EXPLOSIVE MATERIALS,2015,44(01):28.[doi:10.3969/j.issn.10018352.2015.01.007]
[7]宋力骞,叶志文,徐乾.优质失水山梨醇倍半油酸酯的合成[J].爆破器材,2015,44(04):24.[doi:10.3969/j.issn.1001-8352.2015.04.006]
 SONG Liqian,YE Zhiwen,XU Qian.Synthesis of High Quality Sorbitan Sesquioleate[J].EXPLOSIVE MATERIALS,2015,44(01):24.[doi:10.3969/j.issn.1001-8352.2015.04.006]
[8]綦海军,明刚,刘再强,等.乳胶基质管路的压力降研究与安全性分析[J].爆破器材,2016,45(02):47.[doi:10.3969/j.issn.1001-8352.2016.02.012]
 QI Haijun,MING Gang,LIU Zaiqiang,et al.Research on Pressure Drop and Safety in Transport Pipes of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2016,45(01):47.[doi:10.3969/j.issn.1001-8352.2016.02.012]
[9]张小勇,周宇,杨敏会,等.30 t级乳胶基质配送车的设计研究[J].爆破器材,2018,47(01):37.[doi:10.3969/j.issn.1001-8352.2018.01.007]
 ZHANG Xiaoyong,ZHOU Yu,YANG Minhui,et al.Design and Research of an Emulsion Matrix Delivery Vehicle with the Capacity of 30 Tons[J].EXPLOSIVE MATERIALS,2018,47(01):37.[doi:10.3969/j.issn.1001-8352.2018.01.007]
[10]彭迪,叶志文.乳化剂聚异丁烯丁二酸聚乙二醇酯的合成及其应用[J].爆破器材,2020,49(03):22.[doi:10.3969/j.issn.1001-8352.2020.03.004]
 PENG Di,YE Zhiwen.Synthesis and Application of Polyisobatylene Succinic Polyethylene Glycol Ester[J].EXPLOSIVE MATERIALS,2020,49(01):22.[doi:10.3969/j.issn.1001-8352.2020.03.004]

备注/Memo

备注/Memo:
收稿日期:2015-07-10
基金项目:国家自然科学基金(51174120)
作者简介:吴鹏(1991~),男,硕士研究生,主要从事乳胶基质老化研究。E-mail:wupengskd@sina.cn
通信作者:刘静平(1974~),女,工程师,主要从事工业炸药的分析测试。E-mail:liu-jingping@163.com
更新日期/Last Update: 2016-01-29