[1]刘艳萍,金大勇,高玉玲,等.DNAN基含铝熔铸炸药倒药方法研究[J].爆破器材,2014,43(05):51-56.[doi:10.3969/j.issn.1001-8352.2014.05.011]
　LIU Yanping,JIN Dayong,GAO Yuling,et al.Study on the Chargeinverted Method of DNANbased Aluminized Meltcast Explosive[J].EXPLOSIVE MATERIALS,2014,43(05):51-56.[doi:10.3969/j.issn.1001-8352.2014.05.011]
点击复制

DNAN基含铝熔铸炸药倒药方法研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
43
期数:
2014年05
页码:
51-56
栏目:
出版日期:
2014-10-20

文章信息/Info

Title:
Study on the Chargeinverted Method of DNANbased Aluminized Meltcast Explosive
文章编号:
4782
作者:
刘艳萍; 金大勇; 高玉玲; 付改侠
西安近代化学研究所（陕西西安，710065）
Author(s):
LIU Yanping;  JIN Dayong;  GAO Yuling;  FU Gaixia
Xi＇an Modern Chemistry Research Institute (shaanxi xi＇an, 710065)
关键词:
炸药; 缺陷; 倒药; 模型; 不合格; 处置
Keywords:
explosive;  drawback;  inversion of charge;  model;  unqualified products;  treatment
分类号:
TQ 560.7
DOI:
10.3969/j.issn.1001-8352.2014.05.011
文献标志码:
A
摘要:
为了重复利用不合格战斗部壳体及炸药，针对战斗部装填的DNAN基含铝熔铸炸药进行了特性分析，对比了机械破碎法、化学试剂溶解法、间接加热熔化法等几种常用倒药方法的优缺点，最终选定了适合该炸药体系的间接加热熔化倒药方法。同时，对倒药过程的安全性进行了分析，并利用计算模型对倒药工艺参数进行了预估。试验结果表明，计算模型预估与实际结果较为吻合。该方法的应用，既节约了成本，又避免了环境污染，实现了资源的循环使用。
Abstract:
In order to reuse unqualified warhead shell and its filling explosive, the characteristics of DNANbased aluminized meltcast explosive were analyzed. The advantages and disadvantages of several common charge inversions, including mechanical disruption, chemical dissolution, melting through indirect heating and so on, were compared. The last method was finally selected to suit this explosive system best. Meanwhile, the safety analysis was conducted in the chargeinverted process. The simulated process parameters had a good agreement with real results according to test verification. The application of this method not only can save cost, but also avoids environmental pollution to achieve the recycling of resources.

参考文献/References:

［1］王浩,王亲会,黄文斌，等．DNAN降低DNTF冲击波感度研究［J］．含能材料，2010，18(4):435-438.
Wang Hao,Wang Qinhui,Huang Wenbin, et al.Shock sensitivity of DNTF reduced by using DNAN［J］.Chinese Journal of Energetic materials,2010,18(4):435-438.
［2］刘光烈,朱啸宇,孟天财．炸药与装药安全技术［M］．北京：兵器工业出版社，1995:335-336.
［3］娄建武,龙源,谢兴博．废弃火炸药和常规弹药的处置与销毁技术［M］．北京：国防工业出版社，2007:161．
［4］王红星,王晓峰,罗一鸣,等．DNAN炸药的烤燃实验［J］．含能材料，2009，17(2):183-186.
Wang Hongxing,Wang Xiaofeng,Luo Yiming, et al.Cookoff test of explosive［J］.Chinese Journal of Energetic materials,2009,17(2):183-186.
［5］王亲会．熔铸混合炸药用载体炸药评述［J］．火炸药学报，2011，34(5):25-28.
 Wang Qinhui.Overview of carrier explosive for meltcast composite explosive［J］.Chinese Journal of Explosives & Propellants, 2011，34(5):25-28.
［6］王昕．美国不敏感混合炸药的发展现状［J］．火炸药学报，2007，30(2)：78-80．
Wang Xin.Current situation of study on insensitive composite explosives in USA［J］．Chinese Journal of Explosives and Propellants，2007，30(2)：78-80．［7］李金明,雷斌,丁玉奎.通用弹药销毁处理技术［M］．北京：国防工业出版社，2012：75．
［8］金大勇,贾宪振,王亲会,等．RTHLDu1炸药注装工艺安全性分析［J］．火工品，2011(6)：41-46．
Jin Dayong,Jia Xianzhen,Wang Qinhui, et al.Security analysis for RTHLDu1 explosive casting techmology［J］．Initiators ＆ pyrotechnics，2011(6)：41-46．
［9］金大勇,王亲会,牛国涛,等．一种高固相含量炸药精密铸装技术［J］．火工品，2013(2)：40-43．
Jin Dayong,Wang Qinhui,Niu Guotao, et al.The technology of precise meltcasting charge with high solid contents［J］．Initiators ＆ pyrotechnics，2013(2)：40-43．
［10］中国石化集团上海工程有限公司.化工工艺设计手册［M］．北京：化学工业出版社，2009．

相似文献/References:

[1]常新岩,郁刚,徐鸿儒,等.无源自动水喷淋系统[J].爆破器材,2010,39(01):29.
　CHANG Xinyan,YU Gang,XU Hongru,et al.Automatic Water Spray System without Power[J].EXPLOSIVE MATERIALS,2010,39(05):29.
[2]解立峰,韩志伟,王海洋,等.民用炸药敏感度试验方法的研究与探讨[J].爆破器材,2011,40(02):8.
　XIE Lifeng,HAN Zhiwei,WANG Haiyang,et al.The Study of Sensitivity Testing Methods of Civil Explosives[J].EXPLOSIVE MATERIALS,2011,40(05):8.
[3]黄寅生,卢志坚.,卢光明.近年民用爆破器材专利特征分析[J].爆破器材,2009,38(05):22.
　HUANG Yinsheng,LU Zhijian.,LU Guangming.Analysis on Resent Patents of Industrial Explosive Materials[J].EXPLOSIVE MATERIALS,2009,38(05):22.
[4]常新岩,谢永言,郑永芬.工业炸药自动包装线的安全性探讨[J].爆破器材,2009,38(01):8.
　CHANG Xinyan,XIE Yongyan,ZHENG Yongfen.Discussion on Safety of Industrial Explosive Automatic Packing Line[J].EXPLOSIVE MATERIALS,2009,38(05):8.
[5]张袁斌,陈文靖,叶志文.N2O5/HNO3体系硝解三（N-乙酰基）六氢化均三嗪制备RDX[J].爆破器材,2012,41(04):9.
　ZHANG Yuanbin,CHEN Wenjing,YE Zhiwen.Preparation of RDX by Nitrolysis of 1,3,5-Triacetyl Hexahydro-1,3,5-Triazaine with N2O5/HNO3[J].EXPLOSIVE MATERIALS,2012,41(05):9.
[6]黄亚峰,王晓峰,王红星,等.火炸药双螺杆挤出工艺的研究现状与发展[J].爆破器材,2013,42(04):41.[doi:10.3969/j.issn.1001-8352.2013.04.010]
　HUANG Yafeng,WANG Xiaofeng,WANG Hongxing,et al.Research Status and Development of the Twin Screw Extrusion Technology on the propellants and explosives[J].EXPLOSIVE MATERIALS,2013,42(05):41.[doi:10.3969/j.issn.1001-8352.2013.04.010]
[7]封雪松,徐洪涛,田轩,等.含储氢合金炸药的能量研究[J].爆破器材,2013,42(05):13.[doi:10.3969/j.issn.1001-8352.2013.05.003]
　FENG Xuesong,XU Hongtao,TIAN Xuan,et al.Energy Research of Explosive Containing Hydrogen Storage Alloy[J].EXPLOSIVE MATERIALS,2013,42(05):13.[doi:10.3969/j.issn.1001-8352.2013.05.003]
[8]杨惠,杨建钢,方学谦.支持向量机法预测单质炸药爆速的研究[J].爆破器材,2015,44(02):28.[doi:10.3969/j.issn.1001-8352.2015.02.007]
　YANG Hui,YANG Jiangang,FANG Xueqian.Prediction the Detonating Velocity of Elemental Explosives by Support Vector Machine[J].EXPLOSIVE MATERIALS,2015,44(05):28.[doi:10.3969/j.issn.1001-8352.2015.02.007]
[9]赵晓莉,夏斌,刘尊义,等.模拟高原环境对炸药爆速影响的试验研究[J].爆破器材,2015,44(02):36.[doi:10.3969/j.issn.1001-8352.2015.02.009]
　ZHAO Xiaoli,XIA Bin,LIU Zunyi,et al.Experimental Research on Detonation Velocity of Explosive in Simulated Plateau Environment[J].EXPLOSIVE MATERIALS,2015,44(05):36.[doi:10.3969/j.issn.1001-8352.2015.02.009]
[10]杨爱武①,华琦①,刘笑临②,等.红外光谱分析在银导爆索热处理工艺中的应用[J].爆破器材,2015,44(02):40.[doi:10.3969/j.issn.1001-8352.2015.02.010]
　YANG Aiwu,HUA Qi,LIU Xiaolin,et al.Application of Infrared Spectrum Analysis on Heat Treatment Process of the Silver Detonating Cord[J].EXPLOSIVE MATERIALS,2015,44(05):40.[doi:10.3969/j.issn.1001-8352.2015.02.010]

备注/Memo

备注/Memo:
收稿日期：2014-03-05
作者简介：刘艳萍（1974~），女，工程师，主要从事火炸药装药及性能检测。E-mail：lyp_713@163.com
更新日期/Last Update: 2014-10-17