[1]张子敏①,许碧英①,阎峰②,等.活性金属药型罩射孔弹破甲试验研究[J].爆破器材,2013,42(04):53-56.[doi:10.3969/j.issn.1001-8352.2013.04.013]
　ZHANG Zimin,XU Biying,YAN Feng,et al.Penetrating Test of Active Metal Charge Liner Perforating Bullet[J].EXPLOSIVE MATERIALS,2013,42(04):53-56.[doi:10.3969/j.issn.1001-8352.2013.04.013]
点击复制

活性金属药型罩射孔弹破甲试验研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
42
期数:
2013年04
页码:
53-56
栏目:
安全与测试
出版日期:
2013-08-20

文章信息/Info

Title:
Penetrating Test of Active Metal Charge Liner Perforating Bullet
文章编号:
4633
作者:
张子敏①; 许碧英①; 阎峰②; 刘丰旺①; 郭惊雷②; 付伟①
①西安近代化学研究所(陕西西安,710065)
②北方斯伦贝谢油田技术有限公司(陕西西安,710065）
Author(s):
ZHANG Zimin①; XU Biying①; YAN Feng②; LIU Fengwang①; GUO Jinglei②; FU Wei①
① Xi’an Modern Chemistry Research Institute（Shaanxi,Xi’an 710065） ②North Schlumberger Oilfield Technologies CO.,led（Shaanxi,Xian 710065）
关键词:
活性金属药型罩; 粉末药型罩; 射孔弹; 可反应金属
Keywords:
active metal charge liner; powder shaped charge liner; perforating bullet; reactive metal
分类号:
TD235.1+1 TE257+.1
DOI:
10.3969/j.issn.1001-8352.2013.04.013
文献标志码:
A
摘要:
为增大射孔弹的穿孔孔径，设计了一种活性金属药型罩，该种药型罩中包含在外界作用下可产生放热反应的铝/镍金属体系，同时选用3种活性金属材料配方开展相应试验，并与铜钨金属粉末药型罩的作用效能进行对比。试验结果表明，添加一定比例反应性金属能够提高药型罩射流的后效作用能力、增大穿孔孔径，其中，铜粉质量分数为10%时对增加射流穿深几乎没有形成帮助，而当铜粉质量分数为70%时，射流的穿深显著增大。
Abstract:
An active metal charge liner for perforating bullet was designed to enlarge the diameter of the hole in the object. The liner contained an Al/Ni metal system that can generate exothermal reaction by certain external action. Meanwhile, 3 active metal material formulas were chosen to develop corresponding experiments, and they were compared with the action of shaped charge liner consisting of coopertungsten metal powder. The results show that the addition of certain scale reactive metals can help the shaped charge liner provide certain energy to improve the after effect ability of jet and enlarge the hole diameter. There is no help to increase the jet perforating deep when the mass ratio of copper powder is 10%, while the jet perforating deep was significantly increased when the mass ratio of copper powder grows to 70%.

参考文献/References:

［1］王毅,姜炜,刘宏英，等.聚能装药粉末药型罩材料技术的发展和现状［J］.爆破器材，2007,36(5):33-36.
Wang Yi, Jiang Wei, Liu Hongying, et al. The development and current situation of material and technology about explosiveloading powder Liners［J］. Explosive Materials, 2007,36(5):33-36.
［2］王艳萍,黄寅生,姜延东.大孔径石油射孔弹性能的实验研究［J］.火炸药学报, 2002(3):79-80.
Wang Yanping, Huang Yinsheng,Jiang Yandong. Experiment study of big entry hole charge for petroleum［J］.Chinese Journal of Explosives & Propellants,2002(3):79-80.
［3］赵腾,罗虹,贾万明，等.药型罩材料技术基本要素探讨［J］.兵器材料科学与工程,2007，30（5）：77-82.
Zhao Teng,Luo Hong,Jia Wanming,et al. Discussion on the basic elements of shaped charge liner material［J］. Ordnance Material Science and Engineering,2007,30（5）：77-82.
［4］王毅,姜炜,刘宏英，等.粉末药型罩材料及其工艺技术的研究进展［J］.含能材料,2007,15(5): 555-559.
Wang Yi,Jiang Wei,Liu Hongying,et al. Progress in materias and processing technology of powder liners［J］.Chinese Journal of Energergetic Materials, 2007,15(5): 555-559.
［5］Committee on advanced energetic materials and manufacturing technologies,National Research Council.Advanced Energetic Materials［M］.Washington D C: The National Academies Press, 2004.
［6］韩欢庆,姜伟,张鹏，等.金属粉末在药型罩中的应用［J］.粉末冶金工业，2004,14（3）：1-4.
 Han Huanqing,Jiang Wei,Zhang Peng,et al. Application of metal powders to shaped charge liner［J］. Powder Metallurgy Industry,2004,14(3): 1-4.
［7］李晋庆.几种新型石油射孔弹的研究和讨论［J］.爆破器材,2003,32(4):27-30.
Li Jinqing. Research and discuss of new types oil perforator［J］. Explosive Materials, 2003,32(4):27-30.
［8］胡忠武,李中奎,张廷杰,等.药型罩材料的发展［J］.稀有金属材料与工程,2004,33(10)：1009-1012.
Hu Zhongwu,Li Zhongkui,Zhang Tingjie,et al. Advanced progress in materials for shaped charge and explosively formed penetrator liners［J］. Rare Metal Materials and Engineering, 2004,33(10)：1009-1012.
［9］史慧生,王志信.增效射孔的整体设计［J］.爆破器材，2001,30（2）:32-38.
Shi Huisheng,Wang Zhixin.The integrative design of synergestic pergoration［J］. Explosive Materials, 2001,30（2）:32-38.
［10］Bourne B.Oil Well Perforator:US,6877562B2［P］. 2005-04-12.

相似文献/References:

[1]郭红军,石健,王宝兴,等.影响大孔径粉末药型罩性能的几个主要因素[J].爆破器材,2010,39(02):35.
　GUO hongjun,SHI Jian,WANG Baoxing,et al.Disscussion on Major Factors Affecting Performances of Bighole Powder Liner[J].EXPLOSIVE MATERIALS,2010,39(04):35.
[2]吴焕龙.装药与药型罩分离对射孔弹穿深影响的规律研究[J].爆破器材,2014,43(01):38.[doi:10.3969/j.issn.1001-8352.2014.01.008]
　WU Huanlong.Law Study on the Influence of Charging and Liner Separation to Penetration Depth of Perforating Charge[J].EXPLOSIVE MATERIALS,2014,43(04):38.[doi:10.3969/j.issn.1001-8352.2014.01.008]
[3]赵云涛,周明,徐文新,等.药型罩轴向密实度分布对射孔弹性能的影响研究[J].爆破器材,2015,44(03):55.[doi:10.3969/j.issn.1001-8352.2015.03.013]
　ZHAO Yuntao,ZHOU Ming,XU Wenxin,et al.Effect of the Axial Compactness Distribution of Lineron Performance of Perforating Charge[J].EXPLOSIVE MATERIALS,2015,44(04):55.[doi:10.3969/j.issn.1001-8352.2015.03.013]

备注/Memo

备注/Memo:
收稿日期：2013-05-03
作者简介：张子敏（1981~）女，硕士，工程师，主要研究方向：聚能战斗部设计研究。E-mail:zhangzimin1981@163.com
更新日期/Last Update: 2013-08-25