参考文献/References:
[1]亨利奇.爆炸动力学及其应用[M].熊建国,译.北京:科学出版社,1987.[2]马荷梅,张若京.土中爆炸冲击混凝土道面的数值模拟[J].力学季刊,2005,26(3):428~432.[3]唐献述,贺五一,刘阳,等.接触爆炸作用下SFRC破坏效应研究[J].弹箭与制导学报,2008,28(6):118~122.[4]Rabb R J, Fahrenthold E P. Numerical Simulation of the Oblique Impact on Orbital Debris Shielding [J]. International Journal of Impact Engineering,1999,23 (1):735~744.[5]Robertsson J O A. A numerical freesurface condition for elastic viscoelastic finitedifference modeling in the presence of topography[J]. Geophysics, 1996, 61(6):1921~1934.[6]王淑玲,苟瑞君.线型聚能装药切割钢板过程的数值模拟[J].机械管理开发,2008,23(3):72~73,76.[7]张雄,陆明万,王建军.任意拉格朗日—欧拉描述法研究进展[J].计算力学学报,1997,14(1):91~102.[8]白金泽.LSDYNA3D理论基础与实例分析[M].北京.科学出版社,2005.[9]章冠人,陈大平.凝聚炸药起爆动力学[M].北京: 国防工业出版社, 1991.[10]冯长根,王海亮,金龙,等.爆炸衬砌过程中介质位移的数值模拟研究[J].火炸药学报,2002(4):1~4.
相似文献/References:
[1]郭涛,高振儒,范磊,等.不同位置条件下减震沟减震效应的数值模拟[J].爆破器材,2010,39(02):7.
GUO Tao,GAO Zhenru,FAN Lei,et al.Numerical Simulation of Damping Effect of Damping Ditch with Different Location[J].EXPLOSIVE MATERIALS,2010,39(06):7.
[2]朱铭颉,顾文彬,唐勇,等.炸高对侵彻效应影响试验和数值模拟研究[J].爆破器材,2010,39(02):31.
ZHU Mingjie,GU Wenbin,TANG Yong,et al.The Experimental & Numerical Simulation of the Standoff Effect to Penetra[J].EXPLOSIVE MATERIALS,2010,39(06):31.
[3]张世林,周春桂,王志军,等.一种新型水射流切割器成型的仿真研究[J].爆破器材,2011,40(02):5.
ZHANG Shilin,ZHOU Chungui,WANG Zhijun.Simulation and Research on Water Jet Formation of a New Type Molding Cutter[J].EXPLOSIVE MATERIALS,2011,40(06):5.
[4]姚志华,王志军,付璐,等.半正方形罩线型切割器的数值模拟研究[J].爆破器材,2011,40(02):11.
YAO Zhihua,WANG Zhijun,FU Lu,et al.Numerical Simulation of Linear Cutter with Semi-square Liner[J].EXPLOSIVE MATERIALS,2011,40(06):11.
[5]刘好全,何洋扬,张洋溢.爆轰波斜入射金属材料的模拟计算[J].爆破器材,2009,38(06):1.
LIU Haoquan,HE Yangyang,ZHANG Yangyi.Simulation on the Oblique Reflection of Detonation Waves at the ExplosiveMetal Interface[J].EXPLOSIVE MATERIALS,2009,38(06):1.
[6]任西,陈军,韩克华,等.闪光X射线技术在爆炸过程中的成像应用[J].爆破器材,2009,38(06):21.
REN Xi,CHEN Jun,HAN Kehua,et al.Application of Flash Radiography on Explosion[J].EXPLOSIVE MATERIALS,2009,38(06):21.
[7]丁伟兴,姬月萍,汪伟,等.TATP的性能及检测技术综述[J].爆破器材,2009,38(03):35.
DING Weixing,JI Yueping,WANG Wei,et al.Overview on the Property and Detecting Technology of TATP[J].EXPLOSIVE MATERIALS,2009,38(06):35.
[8]安二峰,杨军,陈鹏万.高锰钢整铸辙叉爆炸硬化实践与研究[J].爆破器材,2009,38(02):25.
AN Erfeng,YANG Jun,CHEN Pengwan.Study on Explosive Hardening of Hadfield Steel Rail Frogs[J].EXPLOSIVE MATERIALS,2009,38(06):25.
[9]徐全军,白帆,伍睿星.占据式聚能装药射流形成的数值模拟及试验研究[J].爆破器材,2011,40(03):11.
XU Quanjun,BAI Fan,WU Ruixing.Numerical Simulation of Jet Formation by Shaped Charge with the Inhibitor and Experimental Investigation[J].EXPLOSIVE MATERIALS,2011,40(06):11.
[10]成凤生,宋浦,顾晓辉,等.TNT装药爆炸波在刚性平面上方传播反射的数值研究[J].爆破器材,2011,40(04):1.
CHENG Fengsheng,SONG Pu,GU Xiaohui,et al.Numerical Investigation into the Propagation and Reflection of TNT Blast Wave above Rigid Plane[J].EXPLOSIVE MATERIALS,2011,40(06):1.
[11]杜明燃,张金龙,梁琳娜,等.炸药爆轰热力学数据非线性拟合方法研究[J].爆破器材,2019,48(03):38.[doi:10.3969/j.issn.1001-8352.2019.03.008]
DU Mingran,ZHANG Jinlong,LIANG Linna,et al.Nonlinear Fitting Method of Thermodynamic Data of Detonation Products and Its Application[J].EXPLOSIVE MATERIALS,2019,48(06):38.[doi:10.3969/j.issn.1001-8352.2019.03.008]