[1]陈飞,邢光武,甘德淮,等.敞开式无动力冷却器的研制[J].爆破器材,2011,40(04):12-15.
　CHEN Fei,XING Guangwu,GAN Dehuai,et al.Development of Open Unpowered Cooler[J].EXPLOSIVE MATERIALS,2011,40(04):12-15.
点击复制

敞开式无动力冷却器的研制()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
40
期数:
2011年04
页码:
12-15
栏目:
爆炸材料
出版日期:
2011-08-20

文章信息/Info

Title:
Development of Open Unpowered Cooler
文章编号:
4375
作者:
陈飞; 邢光武; 甘德淮; 谭文斌; 温建平; 陈清平
（广东宏大爆破股份有限公司，广东广州510623）
Author(s):
CHEN Fei;  XING Guangwu;  GAN Dehuai;  TAN Wenbin;  WEN Jianping;  CHEN Qingping
Guangdong Hongda Blasting Co., Ltd. (GuangDong Guangzhou, 510623)
关键词:
乳化炸药; 乳胶基质; 冷却器; 敞开; 无动力
Keywords:
emulsion explosive;  latex matrix;  cooler;  open;  unpowered
分类号:
TD235.2+1 TK414.2+1
文献标志码:
A
摘要:
简述了一种敞开式无动力冷却器的设计思路，讨论了传热面积、传热系数、冷却水温度及流速对冷却效率和乳胶基质的影响因素。乳胶基质在冷却介质中停留6～10s，可由95℃冷却至55℃以下，该冷却器占地面积在1.5m2以内。
Abstract:
This paper introduced an open and unpowered cooler, and studied the influence of heat transfer areas, heat transmit coefficient, the temperature and flow of cooling water on the cooling efficiency and latex matrix. 6~10s’stay in the cooling medium could cool the matrix from 95℃ to below 55℃. And this cooler covers only an area of 1.5 m2.

参考文献/References:

［1］谢皆见.钢带晾药机的应用［J］.矿业快报，2005（5）：44~45. ［2］史良文，查正清，钟荫庭.新型乳胶基质冷却器的研究与应用［J］.矿冶，1999，8（3）：13~16.［3］陈飞,何颖.珍珠岩敏化技术参数对乳胶基质性能的影响［J］.爆破器材,2002.31(1):10~13.［4］汪旭光.乳化炸药［M］.北京:冶金工业出版社,2008:258~268.［5］陈飞，邢光武，郑炳旭，等.一种敞开式无动力的冷却器:中国,201020650134.5［P］,申请日:2010 12~09.［6］陈飞，肖才榕.乳化器中搅拌结构及参数对乳化作用的影响［J］.爆破器材,2002.31(4): 33~37.［7］杨民钢，于魏清，杨卫东.乳化炸药连续冷却机的研制［J］.煤矿爆破,2001（1）：4~7.［8］贾进宝,刘正凯,陈飞,等.AE型乳化炸药安全性试验［J］. 矿冶工程,1994.14（1）：13~16.

相似文献/References:

[1]熊家权,林华岱.影响乳化炸药性能因素探讨[J].爆破器材,2010,39(01):13.
　XIONG Jiaquan,LIN Huadai.Discussion on Factors Affecting the Performance of Emulsion Explosive[J].EXPLOSIVE MATERIALS,2010,39(04):13.
[2]黄铁飞,荣光富,杨曙光,等.乳化剂对混装乳化炸药质量性能的影响及实践应用[J].爆破器材,2010,39(02):14.
　HUANG Tiefei,RONG Guangfu,YANG Shuguang,et al.Effect of Emulsifier on the Quality Performance of Emulsion Explosive and Its Practical Application[J].EXPLOSIVE MATERIALS,2010,39(04):14.
[3]阮华.用正交试验方法优化乳化炸药设计[J].爆破器材,2010,39(02):23.
　RUAN Hua.The Optimization of the Emulsion Explosive by Using Orthogonal Experimental Method[J].EXPLOSIVE MATERIALS,2010,39(04):23.
[4]李瑛,柏存增.不同敏化条件下乳化炸药减敏的实验研究[J].爆破器材,2011,40(01):19.
　LI Ying,BO Cunzeng.Experimental Research on Reducing Sensitivity of Emulsion Explosive in Different Sensitization Methods[J].EXPLOSIVE MATERIALS,2011,40(04):19.
[5]郭敏,贾海亮,原海青,等.高温敏化工艺乳化炸药储存期影响因素分析[J].爆破器材,2011,40(01):24.
　GUO Min,JIA Hailiang,YUAN Haiqing,et al.Analysis of Influencing Factors on the Storage of Emulsion Explosives by High-temperature Sensitization[J].EXPLOSIVE MATERIALS,2011,40(04):24.
[6]龚兵,熊代余,李国仲,等.BCJ多功能装药车的研究与应用[J].爆破器材,2010,39(03):12.
　GONG Bing,XIONG Daiyu,LI Guozhong,et al.Development and Application of BCJ Multi-function Charge Truck[J].EXPLOSIVE MATERIALS,2010,39(04):12.
[7]王军,王越胜.故障树分析法在乳化炸药生产中的应用概述[J].爆破器材,2010,39(03):15.
　WANG Jun,WANG Yuesheng.Application of Fault Tree Analysis in the Production of Emulsion Explosive[J].EXPLOSIVE MATERIALS,2010,39(04):15.
[8]张翠英,吴龙祥,王永斌.新型高效乳化器的研制及应用[J].爆破器材,2010,39(05):12.
　ZHANG Cuiying,WU Longxiang,WANG Yongbin.Research and Application of the New-type Efficient Emulsifier[J].EXPLOSIVE MATERIALS,2010,39(04):12.
[9]马耀川.全连续化乳化生产线影响炸药爆炸性能的几个因素[J].爆破器材,2010,39(05):20.
　MA Yaochuan.Several Factors Affecting the Performance of Emulsion Explosive in Continuous Production Line[J].EXPLOSIVE MATERIALS,2010,39(04):20.
[10]郑卫东,李峰,潘伟纲.乳化炸药水油相集中制备的应用[J].爆破器材,2010,39(05):22.
　ZHENG Weidong,LI Feng,PAN Weigang.Concentrated Preparation Application for Water and Oil Phase of Emulsion Explosives[J].EXPLOSIVE MATERIALS,2010,39(04):22.
[11]陈飞,邢光武,江志华,等.多元易发泡型复合乳化剂乳化炸药的制备[J].爆破器材,2011,40(06):23.
　CHEN Fei,XING Guangwu,JIANG Zhihua,et al.Preparation of Emulsion Explosive Containing Multielement Foaming Composite Emulsifying Agent[J].EXPLOSIVE MATERIALS,2011,40(04):23.

备注/Memo

备注/Memo:
收稿日期：2011-04-18 作者简介：陈飞 （1963~），男，高级工程师。从事乳化炸药生产管理与管道化生产技术的研究。
更新日期/Last Update: 2011-08-30