[1]张世林,周春桂,王志军,等.一种新型水射流切割器成型的仿真研究[J].爆破器材,2011,40(02):5-7.
　ZHANG Shilin,ZHOU Chungui,WANG Zhijun.Simulation and Research on Water Jet Formation of a New Type Molding Cutter[J].EXPLOSIVE MATERIALS,2011,40(02):5-7.
点击复制

一种新型水射流切割器成型的仿真研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
40
期数:
2011年02
页码:
5-7
栏目:
基础理论
出版日期:
2011-04-20

文章信息/Info

Title:
Simulation and Research on Water Jet Formation of a New Type Molding Cutter
文章编号:
4341
作者:
张世林1; 周春桂1; 王志军1; 黄德雨2
（1.中北大学机电工程学院，山西太原030051；2.中国人民解放军95874部队，江苏南京210022）
Author(s):
ZHANG Shilin;  ZHOU Chungui;  WANG Zhijun
School of Mechatronic Engineering, North University of China (Shanxi Taiyuan, 030051)
关键词:
数值模拟; 高速水束; 二次汇聚; 爆炸物处理; 切割
Keywords:
numerical simulation;  highspeed water jet;  shaped charge;  EOD;  cutting
分类号:
TJ410.3 O389
文献标志码:
A
摘要:
提出一种新型的排爆装置结构，它是在楔形药型罩基础上，通过改变结构和材料而演化成的一种聚能装药结构。利用ANSYS/LS-DYNA软件完成了爆炸载荷下的水射流成型的数值模拟。研究结果表明新型排爆装置能够实现一股高速水流，形如"刀锋"，可以为实现高速水射流研究提供一种新的选择。
Abstract:
A new structure of cutting EOD device was proposed, which was a shape charges by changing the structure and materials based on the wedgeshaped liner. ANSYS / LSDYNA software was applied to complete the numerical simulation of the water beam forming under explosive load. Study results show that the new structure can achieve a beam of highspeed water flow shaped as a blade, providing a new effective choice.

参考文献/References:

［1］达明艳.高压水射流切割技术综述［J］.中国科技博览，2008（22）：141.［2］Heather Clark. Sandia Labs’ device helps U.S. troops in Afghanistan disable improvised explosive devices［EB/OL］.(20100910)［20101009］https://share.sandia.gov/news/resources/news_releases/fluidbladedisablementtool/. ［3］北京工业学院八系.爆炸及其作用（下）［M］.北京：国防工业出版社，1979:84-123.［4］王志军, 吴国东.一种新型星锥状药型罩形成射流的数值模拟［J］. 兵工学报，2007,28(11):1397-1400.［5］李裕春，时党勇，赵远. ANSYS 11.0/LSDYNA基础理论与工程实践［M］. 北京：中国水利水电出版社，2008：416-433. ［6］何远航，李海军，张庆明.高速水射流与凝聚炸药相互作用的数值模拟［J］.高压物理学报，2005,19（2）:170-173.

相似文献/References:

[1]郭涛,高振儒,范磊,等.不同位置条件下减震沟减震效应的数值模拟[J].爆破器材,2010,39(02):7.
　GUO Tao,GAO Zhenru,FAN Lei,et al.Numerical Simulation of Damping Effect of Damping Ditch with Different Location[J].EXPLOSIVE MATERIALS,2010,39(02):7.
[2]朱铭颉,顾文彬,唐勇,等.炸高对侵彻效应影响试验和数值模拟研究[J].爆破器材,2010,39(02):31.
　ZHU Mingjie,GU Wenbin,TANG Yong,et al.The Experimental & Numerical Simulation of the Standoff Effect to Penetra[J].EXPLOSIVE MATERIALS,2010,39(02):31.
[3]姚志华,王志军,付璐,等.半正方形罩线型切割器的数值模拟研究[J].爆破器材,2011,40(02):11.
　YAO Zhihua,WANG Zhijun,FU Lu,et al.Numerical Simulation of Linear Cutter with Semi-square Liner[J].EXPLOSIVE MATERIALS,2011,40(02):11.
[4]刘好全,何洋扬,张洋溢.爆轰波斜入射金属材料的模拟计算[J].爆破器材,2009,38(06):1.
　LIU Haoquan,HE Yangyang,ZHANG Yangyi.Simulation on the Oblique Reflection of Detonation Waves at the ExplosiveMetal Interface[J].EXPLOSIVE MATERIALS,2009,38(02):1.
[5]安二峰,杨军,陈鹏万.高锰钢整铸辙叉爆炸硬化实践与研究[J].爆破器材,2009,38(02):25.
　AN Erfeng,YANG Jun,CHEN Pengwan.Study on Explosive Hardening of Hadfield Steel Rail Frogs[J].EXPLOSIVE MATERIALS,2009,38(02):25.
[6]徐全军,白帆,伍睿星.占据式聚能装药射流形成的数值模拟及试验研究[J].爆破器材,2011,40(03):11.
　XU Quanjun,BAI Fan,WU Ruixing.Numerical Simulation of Jet Formation by Shaped Charge with the Inhibitor and Experimental Investigation[J].EXPLOSIVE MATERIALS,2011,40(02):11.
[7]成凤生,宋浦,顾晓辉,等.TNT装药爆炸波在刚性平面上方传播反射的数值研究[J].爆破器材,2011,40(04):1.
　CHENG Fengsheng,SONG Pu,GU Xiaohui,et al.Numerical Investigation into the Propagation and Reflection of TNT Blast Wave above Rigid Plane[J].EXPLOSIVE MATERIALS,2011,40(02):1.
[8]史长根,尤峻,周祥,等.高压容器试验仓安全评估计算方法研究[J].爆破器材,2011,40(04):32.
　SHI Changgen,YOU Jun,ZHOU Xiang,et al.Study on Computational Method of Safe Evaluation for Test House of High Pressure Gases Vessel Explosion Hazards[J].EXPLOSIVE MATERIALS,2011,40(02):32.
[9]贾伟①②,吴国东①,王志军①,等.药型罩结构对环形爆炸成型弹丸形成的影响[J].爆破器材,2011,40(06):8.
　JIA Wei,WU Guodong,WANG Zhijun,et al.Influence of Liner Structure on Forming Process of Annular EFP[J].EXPLOSIVE MATERIALS,2011,40(02):8.
[10]周向阳①②.炸药在土壤内部爆炸作用的数值分析[J].爆破器材,2011,40(06):12.
　ZHOU Xiangyang.Numerical Analysis on Explosion of Explosive in Soil[J].EXPLOSIVE MATERIALS,2011,40(02):12.

备注/Memo

备注/Memo:
收稿日期：2010-11-03 作者简介：张世林（1986~），男，硕士研究生 。研究方向为弹箭仿真技术。
更新日期/Last Update: 2011-05-05