[1]史长根,康丽霞,蒋国良.爆炸焊接两板安全间距分析和试验研究[J].爆破器材,2010,39(03):33-35.
　SHI Changgen,KANG Lixia,JIANG Guoliang.Analysis and Experimental Study of Safe Space between Two Plates in Explosive Welding[J].EXPLOSIVE MATERIALS,2010,39(03):33-35.
点击复制

爆炸焊接两板安全间距分析和试验研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
39
期数:
2010年03
页码:
33-35
栏目:
安全与测试
出版日期:
2010-06-20

文章信息/Info

Title:
Analysis and Experimental Study of Safe Space between Two Plates in Explosive Welding
文章编号:
4254
作者:
史长根1; 康丽霞2; 蒋国良1
（1.解放军理工大学工程兵工程学院，江苏南京210007；2.总参陆航部装备发展办公室，北京100012）
Author(s):
SHI Changgen①; KANG Lixia②; JIANG Guoliang①
①Engineering Institute of Engineer Corps, PLA University of Science & Technology (Jiangsu Nanjing, 210007) ②Equipment Development Office of Army Department of General Staff (Beijing, 100012)
关键词:
爆炸焊接; 起爆时差; 安全间距
Keywords:
explosive welding;  time difference of detonation;  safe space
分类号:
TG456.6 O389
文献标志码:
A
摘要:
实验测试了毫秒延期雷管起爆时差和不同配方下的炸药爆速，根据炸药爆轰波的传播规律和冲击波的作用规律，分析和设计了多块复合板的位置和间距，按串联起爆网络及其电压分配规律可实现多块金属板材同时爆炸焊接，提高了生产效率，节约了爆炸焊接的生产成本。
Abstract:
The time difference in detonation of the millisecond delay detonator and detonation velocity with different formulas are tested, and based on the transmit rule of detonation wave and action rule of shock wave, the space between two plates is analyzed. Clumpy plates can be explosively welded at the same time according to series ignition network and its distribution rule of voltage, with the efficiency of production improved and the cost reduced.

参考文献/References:

［1］闫鸿浩.爆炸焊接技术应用与扩展［J］.爆破，2005，22（3）：13-15.［2］郑远谋.爆炸焊接和爆炸复合材料的原理及应用［M］.长沙：中南大学出版社，2007:2-7.［3］邵炳璜,张凯.爆炸焊接原理及其工程应用［M］.大连：大连理工大学出版社，1987:1-5.［4］Explosive Welding of Metals and Its Applications［M］ . Oxford: Clarendon,1982.［5］史长根，洪津,蒋国良，等.爆炸焊接危害机理分析［J］.爆破器材，2009,38（3）：28-30.［6］史长根，冯建,史和庆，等.高碳高铬莱氏体钢爆炸焊接高耐磨复合材料:中国，ZL200610039525.1［P］.2009-06-17.

相似文献/References:

[1]史长根,冯叔瑜,史和生,等.3Cr13Mo-42CrMo高耐磨耐蚀爆炸焊接复合轧辊试验研究[J].爆破器材,2010,39(05):28.
　SHI Changgen,FENG Shuyu,SHI Hesheng,et al.Trial Study of High Wear-resisting and Acid-resisting Cladding Rolling of 3Cr13Mo-42CrMo in Explosive Welding[J].EXPLOSIVE MATERIALS,2010,39(03):28.
[2]史长根,洪津,蒋国良,等.爆炸焊接危害机理分析[J].爆破器材,2009,38(03):28.
　SHI Changgen,HONG Jin,JIANG Guoliang,et al.Harm Mechanism Analysis of Explosive Welding[J].EXPLOSIVE MATERIALS,2009,38(03):28.
[3]刘鹏,陆明,史长根,等.爆炸焊接最佳药量窗口及其参数的确定[J].爆破器材,2011,40(03):35.
　LIU Peng,LU Ming,SHI Changgen,et al.Research on Optimum Charge Window in Explosive Welding[J].EXPLOSIVE MATERIALS,2011,40(03):35.
[4]王振雄,顾文彬,秦入平,等.水下深孔爆破间隔装药起爆时差影响的数值模拟[J].爆破器材,2012,41(03):8.
　WANG Zhenxiong,GU Wenbin,QIN Ruping,et al.Numerical Simulation of the Effect of Initiation Time Difference on Underwater Deephole Compartment Blasting[J].EXPLOSIVE MATERIALS,2012,41(03):8.
[5]唐文龙①,饶国宁①,周景蓉②,等.SUS304不锈钢/Q345R碳钢爆炸焊接工艺参数研究[J].爆破器材,2012,41(05):29.
　TANG Wenlong,RAO Guoning,ZHOU Jingrong,et al.Study on the Parameters in SUS304 Stainless Steel/Q345R Carbon Steel Explosive Welding Process[J].EXPLOSIVE MATERIALS,2012,41(03):29.
[6]孙光,熊代余,龚兵,等.粉状铵油炸药现场混装车的设计与应用[J].爆破器材,2013,42(05):27.[doi:10.3969/j.issn.1001-8352.2013.05.006]
　SUN Guang,XIONG Daiyu,GONG Bing,et al.Design and Application of Powdery Ammonium Nitrate Fuel Oil Explosive on Site Mixed Loading Truck[J].EXPLOSIVE MATERIALS,2013,42(03):27.[doi:10.3969/j.issn.1001-8352.2013.05.006]
[7]齐世福,刘好全,李宾利,等.框剪结构高楼纵向倾倒拆除爆破研究[J].爆破器材,2014,43(03):41.[doi:10.3969/j.issn.1001-8352.2014.03.010]
　QI Shifu,LIU Haoquan,LI Binli,et al.Blasting Study on the Lengthwise Collapse of a Tall Building with a Frame Shear Wall Structure[J].EXPLOSIVE MATERIALS,2014,43(03):41.[doi:10.3969/j.issn.1001-8352.2014.03.010]
[8]史长根,尤峻.双立式爆炸焊接新方法[J].爆破器材,2008,37(03):28.
　Shi Changgen,You Jun.New Technology of Double Vertical Explosive Welding[J].EXPLOSIVE MATERIALS,2008,37(03):28.
[9]王宇新①,李晓杰①,王小红①,等.基于爆炸焊接技术对磨损失效轧辊的修复研究[J].爆破器材,2018,47(06):8.[doi:10.3969/j.issn.1001-8352.2018.06.002]
　WANG Yuxin,LI Xiaojie,WANG Xiaohong,et al.Study on Repair of Worn Roller Using Explosive Welding Technology[J].EXPLOSIVE MATERIALS,2018,47(03):8.[doi:10.3969/j.issn.1001-8352.2018.06.002]
[10]朱福元①,郭子如②,张仲一②,等.一种平板状爆炸焊接用炸药[J].爆破器材,2021,50(03):40.[doi:10.3969/j.issn.1001-8352.2021.03.008]
　ZHU Fuyuan,GUO Ziru,ZHANG Zhongyi,et al.A Flat Explosive for Explosive Welding[J].EXPLOSIVE MATERIALS,2021,50(03):40.[doi:10.3969/j.issn.1001-8352.2021.03.008]

备注/Memo

备注/Memo:
收稿日期：2009-12-14 作者简介：史长根(1971年~)，男，工学博士，副教授。主要从事爆炸焊接及金属复合材料方面的研究工作。
更新日期/Last Update: 2011-03-31