[1]马平,康廷璋,王尹军,等.机械制粉工艺粉状乳化炸药的配方研究[J].爆破器材,2008,37(06):18-20.
　Ma Ping,Kang Tingzhang,Wang Yinjun,et al.Research on the Formulation of Powdery Emulsion Explosive with Mechanical Pulverization Technics[J].EXPLOSIVE MATERIALS,2008,37(06):18-20.
点击复制

机械制粉工艺粉状乳化炸药的配方研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
37
期数:
2008年06
页码:
18-20
栏目:
爆炸材料
出版日期:
2008-12-20

文章信息/Info

Title:
Research on the Formulation of Powdery Emulsion Explosive with Mechanical Pulverization Technics
文章编号:
4112
作者:
马平; 康廷璋; 王尹军; 李国仲
北京矿冶研究总院（北京，100044）
Author(s):
Ma Ping;  Kang Tingzhang;  Wang Yinjun;  Li Guozhong
Beijing General Research Institute of Mining and Metallurgy (Beijing, 100044)
关键词:
粉状乳化炸药; 机械制粉; 炸药配方
Keywords:
powdery emulsion explosive ;  mechanical pulverization;  explosive formulation
分类号:
TD235.21
文献标志码:
A
摘要:
文章结合粉状乳化炸药机械制粉工艺的特点，从乳化剂、油相材料、添加剂三个方面对新工艺的配方及乳化工艺条件对炸药性能的影响进行了论述。结果表明，采用新配方经机械制粉工艺制备的粉状乳化炸药与喷雾制粉工艺产品爆炸性能接近，并且堆积密度大、流散性好。
Abstract:
Combined with the obvious characteristic of the mechanical pulverization technics of powdery emulsion explosive, the effect of the new formulation and technics condition on the explosive performance was discussed in this paper,from the aspects of emulsifier, wax and solid additive. Results showed that the detonation performance of the powdery emulsion explosive which was produced from mechanical pulverization technics with the new formulation was near to the performance of the conventional explosive. At the same time, it was proved that its bulk density was larger and the fluidity of the powder was much better.

参考文献/References:

［1］康廷璋，张晓智，李子强.粉状乳化炸药的生产与应用［J］.工程爆破,2003，9(1)：48～52.
［2］倪欧琪，俞明熊.粉状乳化炸药的研究与发展［J］.爆破器材,2000，29(2)：12～15.
［3］栗峰雷.粉状乳化炸药成粉工艺再探［J］.煤矿爆破,2005(3)：15～16. 
［4］倪欧琪，张兴明，唐双凌,等.粉状乳化炸药的制备方法［P］.中国专利: 1765853，2006-05-03.
［5］李国仲，康廷璋，马平,等.粉状乳化炸药生产新工艺实验研究［R］.北京：北京矿冶研究总院，2007.
［6］褚万伟，李志武，张茂煜.复合油相材料的物化性质对乳化炸药性能的影响［J］.爆破器材，2003，32（9）：9～12.

相似文献/References:

[1]白建明.Ⅱ型粉状乳化炸药技术的生产应用[J].爆破器材,2010,39(01):15.
　BAI Jianming.Application of Model II Powdery Emulsion Explosive Technology[J].EXPLOSIVE MATERIALS,2010,39(06):15.
[2]王波,安立昌.露天粉状乳化炸药的研究与质量控制[J].爆破器材,2009,38(05):8.
　WANG Bo,AN Lichang.Research and Quantity Control of Powdery Emulsion Explosive for Openpit Operation[J].EXPLOSIVE MATERIALS,2009,38(06):8.
[3]马平,李国仲.粉状乳化炸药热分解动力学研究[J].爆破器材,2009,38(03):1.
　MA Ping,LI Guozhong.Research on the Thermal Decomposition Kinetics of Powdery Emulsion Explosive[J].EXPLOSIVE MATERIALS,2009,38(06):1.
[4]龙明喜①,占必文②,俞蓉①,等.粉状乳化炸药废药回收技术的研究[J].爆破器材,2012,41(01):15.
　LONG Mingxi,ZHAN Biwen,YU Rong,et al.Research on Waste-propellant Recovery Technology of Powdery Emulsion Explosive[J].EXPLOSIVE MATERIALS,2012,41(06):15.
[5]张凯铭①②,倪欧琪①②,俞珍权①②.硝酸钾抑制硝酸铵ANⅣ～ANⅢ相变的效应及其在粉状乳化炸药中的应用[J].爆破器材,2012,41(03):4.
　ZHANG Kaiming,NI Ouqi,YU Zhenquan.The Effect of Potassium Nitrate on Inhabiting ANⅣ～ANⅢ Phase Transition of Ammonium Nitrate and Its Application in Powdery Emulsion Explosive[J].EXPLOSIVE MATERIALS,2012,41(06):4.
[6]吕兆坤①,张凯铭①,倪欧琪①②,等.提高粉状乳化炸药储存稳定性的方法研究[J].爆破器材,2013,42(06):24.[doi:10.3969/j.issn.1001-8352.2013.06.005]
　LV Zhaokun,ZHANG Kaiming,NI Ouqi,et al.Study on Storage Stability of Powdery Emulsion Explosive[J].EXPLOSIVE MATERIALS,2013,42(06):24.[doi:10.3969/j.issn.1001-8352.2013.06.005]
[7]倪欧琪①②,解立峰①,李斌①,等.弯曲装药条件下粉状乳化炸药爆轰特性的试验研究[J].爆破器材,2014,43(02):20.[doi:10.3969/j.issn.1001-8352.2014.02.005]
　NI Ouqi,XIE Lifeng,LI Bin,et al.Experimental Study on the Detonation Characteristic of Powdery Emulsion Explosive in Curved Charge[J].EXPLOSIVE MATERIALS,2014,43(06):20.[doi:10.3969/j.issn.1001-8352.2014.02.005]
[8]张忠,韦锦初.Ⅱ型岩石粉状乳化炸药生产工艺探讨[J].爆破器材,2008,37(06):15.
　Zhang Zhong,Wei Jinchu.Discussion on the Technology of ⅡRock Powdery Emulsion Explosive[J].EXPLOSIVE MATERIALS,2008,37(06):15.
[9]张志银.FR型专用复合蜡在粉状乳化炸药中的应用[J].爆破器材,2016,45(05):46.[doi:10.3969/j.issn.1001-8352.2016.05.010]
　ZHANG Zhiyin.Application of FR Special Compound Wax in Preparation of Powdery Emulsion Explosive[J].EXPLOSIVE MATERIALS,2016,45(06):46.[doi:10.3969/j.issn.1001-8352.2016.05.010]
[10]马平,王尹军,康廷璋,等.机械制粉工艺粉状乳化炸药防结块研究[J].爆破器材,2009,38(01):1.
　MA Ping,WANG Yinjun,KANG Tingzhang,et al.Research on the Anticaking Capacity of Powdery Emulsion Explosive by Mechanical Pulverization Technics[J].EXPLOSIVE MATERIALS,2009,38(06):1.

备注/Memo

备注/Memo:
收稿日期：2008-05-30
更新日期/Last Update: 2015-05-28