[1]柏小娜,李向东,杨亚东.封闭空间内爆炸冲击波超压计算模型及分布特性研究[J].爆破器材,2015,44(03):22-26.[doi:10.3969/j.issn.1001-8352.2015.03.005]
　BAI Xiaona,LI Xiangdong,YANG Yadong.Calculation Model and the Distribution of Wave Pressure under Internal Explosion in Closed Space[J].EXPLOSIVE MATERIALS,2015,44(03):22-26.[doi:10.3969/j.issn.1001-8352.2015.03.005]
点击复制

封闭空间内爆炸冲击波超压计算模型及分布特性研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
44
期数:
2015年03
页码:
22-26
栏目:
基础理论
出版日期:
2015-06-20

文章信息/Info

Title:
Calculation Model and the Distribution of Wave Pressure under Internal Explosion in Closed Space
文章编号:
4874
作者:
柏小娜; 李向东; 杨亚东
南京理工大学智能弹药技术国防重点学科实验室（江苏南京,210094）
Author(s):
BAI Xiaona;  LI Xiangdong;  YANG Yadong
ZNDY Ministerial Key Laboratory, Nanjing University of Science and Technology (Jiangsu Nanjing, 210094)
关键词:
爆炸力学; 内爆炸; 冲击波超压; 计算模型; 镜像爆源
Keywords:
explosion mechanics;  internal explosion;  overpressure of shock waves;  calculation model;  mirror sources
分类号:
O383+.2; TJ510.6
DOI:
10.3969/j.issn.1001-8352.2015.03.005
文献标志码:
A
摘要:
建立了封闭空间内爆炸的冲击波超压计算模型，将冲击波在不同壁面的反射冲击波等效为不同位置镜像爆源产生的入射冲击波，密闭空间内冲击波传播和作用过程等效为爆源与镜像爆源形成冲击波相互叠加的过程，基于LAMB规则，将所有爆源和镜像爆源的冲击波叠加，从而得到封闭空间内任意位置处的超压，并进行了结构内爆炸试验。研究结果表明，装药在封闭空间内爆炸超压呈现多峰性，典型位置处的计算超压时程曲线与试验超压时程曲线符合较好，峰值超压的计算误差小于10.78%，所建模型正确，能够用于内爆炸载荷的快速计算。
Abstract:
A calculation model of the explosive shock wave in closed space was set up. The shock waves reflected by different wall surfaces were equivalent to the incident shock waves generated by the mirror explosion sources at different positions. The propagation and reaction process of shock waves in closed space could be equivalent to the process that the shock waves generated by the explosion source and its mirror image sources were superimposed. Based on the LAMB rules, the shock waves of all explosive source and the mirror sources would be superimposed to obtain the overpressure at an arbitrary position in the closed space. Moreover, internal explosion experiments were conducted.The results indicate that the overpressure exhibits multiple peaks. The calculation overpressure history curves at the typical positions are in good agreement with the experimental ones. The calculation error of overpressure is less than 10.78%. Therefore, the model is correct and could quickly calculate the blast loads under internal explosion.

参考文献/References:

［1］庞伟宾,何翔,李茂生，等. 空气冲击波在坑道内走时规律的实验研究［J］.爆炸与冲击,2003, 23(6): 573-576.
?Pang Weibin, He Xiang,Li Maosheng, et al. The formula for airblast time of arrival in tunnel［J］. Explosion and Shock Waves, 2003, 23(6): 573-576.
［2］杨秀敏, 杨科之,林晨. 封闭空间内爆炸效应［J］.中国人民防空，2006（18）： 64.
［3］Remennikov A M, Timothy A R. Modeling blast loads on buildings in complex city geometries ［J］. Computers and Structures, 2005，83（27）： 2197-2205.
［4］Remennikov A M. A review of methods for predicting bomb blast effects on buildings［J］. Journal of Battlefield Technology, 2003，6(3)：5-10.
［5］陈昊, 陶钢.温压弹在有限空间内爆炸的超压测试和分析［J］. 爆破器材, 2009, 38(5)：4-7.
?Chen Hao, Tao Gang. The test and analysis on overpressure generated by thermobaric grenade explosion in limited space ［J］.Explosive Materials, 2009, 38(5)：4-7.
［6］Syrunin M A, Fedorenko A G， Ivanov A G. Dynamic strength of fiber glass shell［J］. Journal de Physique,1997, 7(3)：517-521.
［7］郭志昆, 宋锋良,刘峰，等.扁平箱形密闭结构内爆炸的模型试验［J］.解放军理工大学学报, 2008, 9(4)：345-350.
?Guo Zhikun,Song Fengliang, Liu Feng,et al. Experiment of closed flat box structure subjected to internal detonation［J］.Journal of PLA University of Science and technology, 2008, 9(4)：345-350.
［8］武海军, 黄风雷,付跃升，等.钢筋混凝土中爆炸破坏效应数值模拟分析［J］. 北京理工大学学报, 2007, 27(3)：200-204.
?Wu Haijun, Huang Fenglei, Fu Yuesheng, et al. Numerical simulation of reinforced concrete breakage under internal blast loading［J］.Transactions of Beijing Institute of Technology，2007,27(3)：200-204.
［9］李向东, 杜忠华. 目标易损性［M］.北京: 北京理工大学出版社, 2013. 
［10］Krauthammer T, Astarlioglu S， Blasko J，et al. Pressureimpulse diagrams for the behavior assessment of structural component［J］. International Journal of Impact Engineering，2008，35(8)：771-783.
［11］张国伟. 终点效应及其应用技术［M］. 北京: 国防工业出版社, 2006.
［12］Charles E N. Blast waves(shock wave and high pressure phenomena) ［M］. Springer, 2010.

相似文献/References:

[1]安二峰,杨军,陈鹏万.高锰钢整铸辙叉爆炸硬化实践与研究[J].爆破器材,2009,38(02):25.
　AN Erfeng,YANG Jun,CHEN Pengwan.Study on Explosive Hardening of Hadfield Steel Rail Frogs[J].EXPLOSIVE MATERIALS,2009,38(03):25.
[2]连赟猛①,方道红②,顾晓辉①,等.典型密闭装置内爆炸尺寸效应研究[J].爆破器材,2012,41(05):1.
　LIAN Yunmeng,FANG Daohong,GU Xiaohui,et al.Effect of Scales on Typical Closed Structure Due to Internal Explosion[J].EXPLOSIVE MATERIALS,2012,41(03):1.
[3]徐森①,张兴明①,潘峰①,等.工业炸药能量测试方法的分析[J].爆破器材,2013,42(01):18.[doi:10.3969/j.issn.1001-8352.2013.01.005]
　XU Sen,ZHANG Xingming,PAN Feng,et al.Analysis on the Energy Testing Methods of Industrial Explosives[J].EXPLOSIVE MATERIALS,2013,42(03):18.[doi:10.3969/j.issn.1001-8352.2013.01.005]
[4]臧立伟,尹建平,王志军.轴向预制破片战斗部的设计研究[J].爆破器材,2013,42(02):5.[doi:10.3969/j.issn.1001-8352.2013.02.002]
　ZANG liwei,YIN Jianping,WANG Zhijun.Optimizing Design of Axial Prefabricated Fragments[J].EXPLOSIVE MATERIALS,2013,42(03):5.[doi:10.3969/j.issn.1001-8352.2013.02.002]
[5]姚志华,李德战,付庆海,等.偏心亚半球成型装药结构的数值模拟[J].爆破器材,2013,42(02):17.[doi:10.3969/j.issn.1001-8352.2013.02.005]
　YAO Zhihua,LI Dezhan,FU Qinghai,et al.Numerical Simulation of Shape Charge with an Eccentric Subhemisphere Liner[J].EXPLOSIVE MATERIALS,2013,42(03):17.[doi:10.3969/j.issn.1001-8352.2013.02.005]
[6]杨亚东,李向东,王晓鸣.爆炸冲击波空中传播特征参量的优化拟合[J].爆破器材,2014,43(01):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
　YANG Yadong,LI Xiangdong,WANG Xiaoming.Optimum Fitting for Characteristic Parameters of Blast Shockwaves Traveling in Air[J].EXPLOSIVE MATERIALS,2014,43(03):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
[7]金朋刚,郭炜,任松涛,等.TNT密闭环境中能量释放特性研究[J].爆破器材,2014,43(02):10.[doi:10.3969/j.issn.1001-8352.2014.02.003]
　JIN Penggang,GUO Wei,REN Songtao,et al.Research on TNT Energy Release Characteristics in Enclosed Condition[J].EXPLOSIVE MATERIALS,2014,43(03):10.[doi:10.3969/j.issn.1001-8352.2014.02.003]
[8]冯海云,胡宏伟,赵向军,等.一种评估炸药作功能力的新测试方法[J].爆破器材,2014,43(02):33.[doi:10.3969/j.issn.1001-8352.2014.02.008]
　FENG Haiyun,HU Hongwei,ZHAO Xiangjun,et al.A New Test Method to Assess the Acting Ability of Explosive[J].EXPLOSIVE MATERIALS,2014,43(03):33.[doi:10.3969/j.issn.1001-8352.2014.02.008]
[9]郑思友,翟廷海,夏斌.工业雷管抗弯性能试验装置与方法设计[J].爆破器材,2014,43(03):33.[doi:10.3969/j.issn.1001-8352.2014.03.008]
　ZHENG Siyou,ZHAI Tinghai,XIA Bin.Testing System and Method Design of the Bending Resistance of Industrial Detonator[J].EXPLOSIVE MATERIALS,2014,43(03):33.[doi:10.3969/j.issn.1001-8352.2014.03.008]
[10]杨斐,王建灵,罗一鸣,等.DNTF/AP/Al体系炸药的能量特性分析[J].爆破器材,2014,43(05):11.[doi:10.3969/j.issn.1001-8352.2014.05.003]
　YANG Fei,WANG Jianling,LUO Yiming,et al.Explosion Energy Characteristics of DNTF/AP/Al Explosive[J].EXPLOSIVE MATERIALS,2014,43(03):11.[doi:10.3969/j.issn.1001-8352.2014.05.003]

备注/Memo

备注/Memo:
收稿日期：2014-09-23
基金项目：国家自然科学基金（51278250）作者简介：柏小娜（1990~），女，硕士研究生，研究方向为终点效应及目标易损性。E-mail：bai_xn2014@163.com
通讯作者：李向东（1969~），男，教授，主要从事终点效应及目标易损性研究。E-mail：lixiangdong692003@aliyun.com
更新日期/Last Update: 2015-05-11