[1]王静①,薛永利①,丁建②③,等.岩石控界切割锥形聚能射流的优化设计及试验[J].爆破器材,2023,52(03):52-57.[doi:10.3969/j.issn.1001-8352.2023.03.008]
　WANG Jing,XUE Yongli,DING Jian,et al.Optimal Design and Test of Conical Shaped Charge for Rock Boundary Control Cutting[J].EXPLOSIVE MATERIALS,2023,52(03):52-57.[doi:10.3969/j.issn.1001-8352.2023.03.008]
点击复制

岩石控界切割锥形聚能射流的优化设计及试验()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
52
期数:
2023年03
页码:
52-57
栏目:
爆破技术
出版日期:
2023-06-06

文章信息/Info

Title:
Optimal Design and Test of Conical Shaped Charge for Rock Boundary Control Cutting
文章编号:
5779
作者:
王静①; 薛永利①; 丁建②③; 顾云①; 李飞①; 刘迪①; 孙飞①; 刘勤杰①
①核工业南京建设集团有限公司（江苏南京，211102）
②南京君缘科爆工程技术有限公司（江苏南京，211103）
③南京理工大学化学与化工学院（江苏南京，210094）
Author(s):
WANG Jing①;  XUE Yongli①;  DING Jian②③;  GU Yun①;  LI Fei①;  LIU Di①;  SUN Fei①;  LIU Qinjie①
①Nuclear Industry Nanjing Construction Group Co., Ltd. (Jiangsu Nanjing, 211102)
②Nanjing Junyuan Kebao Engineering Technology Co., Ltd. (Jiangsu Nanjing, 211103)
③School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology (Jiangsu Nanjing, 210094)
关键词:
控界切割; 控制爆破; 聚能装药; 爆炸破岩
Keywords:
boundary cutting;  controlled blasting;  shaped charge;  rock-breaking by explosion
分类号:
TD235；TJ410.3+33
DOI:
10.3969/j.issn.1001-8352.2023.03.008
文献标志码:
A
摘要:
对聚能装药形成射流冲击岩石展开研究，通过线性聚能装药和锥形罩聚能装药的爆炸破岩对比试验、数值模拟以及岩石断裂力学分析认为，采用锥形罩聚能装药结合初始裂纹形式时，能量利用率更高，能对岩石产生更好的劈裂效果。为得到高速锥形射流，运用正交分析和数值仿真对聚能装药进行了优化设计，优化后的锥形罩聚能装药的参数为：炸高15 mm、药型罩锥角84°、药型罩厚度1.35 mm。优化后的岩石劈裂试验中，两个锥形罩聚能装药同时爆炸作用于岩石，在初始裂缝的引导下形成了长度达120 cm的定向平直裂纹。该试验验证了多点锥形罩聚能装药应用于岩石控界切割技术的有效性，可应用于精细化要求的边界控制爆破。
Abstract:
Shaped charge was used to form a jet to impact the rock. Through the comparative test, numerical simulation and rock fracture mechanics analysis of linear shaped charge and conical shaped charge, it is considered that the conical shaped charge combined with the initial crack form has a higher energy utilization rate and can produce better rock splitting outcome. In order to obtain high-speed conical jet, orthogonal analysis and numerical simulation were used to optimize the design of shaped charge. The parameters of the optimized conical shaped charge are explosion height 15 mm, cone angle 84°, and thickness 1.35 mm. In the optimized rock splitting test, two conical shaped charges exploded simultaneously on the rock, forming a directional straight crack with a length of up to 120 cm under the guidance of the initial crack. It has verified the effectiveness of the application of multi-point conical shaped charge in rock boundary control cutting technology, which could be applied to boundary control blasting with precision requirements.

参考文献/References:

［1］王飞.CAP1400核岛负挖保护层爆破施工技术探讨［J］.煤炭技术, 2015, 34（11）: 323-325.
WANG F. Discussion on blasting construction technology of protection layer excavation in CAP1400 Nuclear Island ［J］. Coal Technology, 2015, 34（11）: 323-325.
［2］贾梦晔, 高永宏, 周鹏飞, 等.药型罩材料与结构的研究进展［J］. 兵器装备工程学报, 2022, 43(1): 10-18.
JIA M Y，GAO Y H，ZHOU P F, et al. Research progress on material and structure of drug cover ［J］. Journal of Ordnance Equipment Engineering, 2022, 43(1): 10-18.
［3］刘亮, 蔡联鸣, 张玉柱, 等.建基面保护层开挖爆破技术新进展［J］. 工程爆破, 2020, 26(6): 42-49.
LIU L, CAI L M, ZHANG Y Z, et al. New progress of blasting techniques for excavation of foundation surface protective layer［J］. Engineering Blasting, 2020, 26(6): 42-49.
［4］王前裕, 谢圣权. 线型聚能切割器在岩石预裂成缝中的应用［J］. 中国矿业, 2001(3): 37-41.
WANG Q Y, XIE S Q. Application of energy-concentrated explosive-loading method to cut pre-split cracks［J］. China Mining Magazine, 2001(3): 37-41.
［5］赵建平, 杨晓红, 张振洋, 等.岩体中线型聚能爆破切割试验及损伤规律研究［J］.采矿技术, 2018,18(5): 95-98, 101.
［6］樊兵凯, 崔瀚. 椭球型药型罩EFP战斗部成型仿真研究［J］. 电子测试, 2021(19): 136-137, 107.
FAN B K, CUI H. Simulation study on EFP warhead forming of ellipsoidal shaped charge liner ［J］. Electronic Test, 2019(19): 136-137, 107.
［7］武天宇, 朱建生, 陈朋, 等. EFP战斗部毁伤效应研究［J］.火工品, 2021(5): 28-31.
WU T Y, ZHU J S, CHEN P, et al. Research on damstruction effect of EFP warhead［J］. Initiators & Pyrotechnics, 2021(5): 28-31.
［8］武天宇, 朱建生, 陈朋, 等. 径向型EFP战斗部结构优化设计［J］. 舰船电子工程, 2021, 41(11): 178-182.
WU T Y, ZHU J S, CHEN P, et al. Structural optimization design of radial EFP warhead［J］. Ship Electronic Engineering, 2021, 41(11): 178-182.

相似文献/References:

[1]沈彤,徐全军,孔福利,等.危桥控制爆破拆除实践[J].爆破器材,2009,38(02):35.
　SHEN Tong,XU Quanjun,KONG Fuli,et al.Demolition of Bridge-beam by Controlled Blasting[J].EXPLOSIVE MATERIALS,2009,38(03):35.
[2]周向阳①,徐全军②,邹锐③,等.城市高架桥控制爆破飞散物防护技术研究与实践[J].爆破器材,2012,41(06):34.[doi:10.3969/J.ISSN.1001-8532.2012.06.010]
　ZHOU Xiangyang,XU Quanjun,ZOU Rui,et al.Research and Practice on Fly Rock Defense Technology of Urban Viaducts Controlled Blasting[J].EXPLOSIVE MATERIALS,2012,41(03):34.[doi:10.3969/J.ISSN.1001-8532.2012.06.010]
[3]戴俊,吴丙权,孟振.切缝药包控制爆破初始裂缝形成分析[J].爆破器材,2013,42(03):49.[doi:10.3969/j.issn.1001-8352.2013.03.012]
　DAI Jun,WU Bingquan,MENG Zhen.Analysis on Formation of Initial Cracks in Cutting Seam Cartridge due to Controlled Blasting[J].EXPLOSIVE MATERIALS,2013,42(03):49.[doi:10.3969/j.issn.1001-8352.2013.03.012]
[4]周应军,陈德志,李本伟,等.复杂环境下75m高冷却塔爆破拆除[J].爆破器材,2013,42(03):53.[doi:10.3969/j.issn.1001-8352.2013.03.013]
　ZHOU Yingjun,CHEN Dezhi,LI Benwei,et al.Blasting Demolition of 75m High Cooling Tower in Complicated Environment[J].EXPLOSIVE MATERIALS,2013,42(03):53.[doi:10.3969/j.issn.1001-8352.2013.03.013]
[5]齐世福,刘好全,李宾利,等.框剪结构高楼纵向倾倒拆除爆破研究[J].爆破器材,2014,43(03):41.[doi:10.3969/j.issn.1001-8352.2014.03.010]
　QI Shifu,LIU Haoquan,LI Binli,et al.Blasting Study on the Lengthwise Collapse of a Tall Building with a Frame Shear Wall Structure[J].EXPLOSIVE MATERIALS,2014,43(03):41.[doi:10.3969/j.issn.1001-8352.2014.03.010]
[6]夏卫国①,袁平①②,武双章①,等.复杂环境下两座烟囱交叉定向爆破拆除[J].爆破器材,2015,44(01):50.[doi:10.3969/j.issn.1001-8352.2015.01.012]
　XIA Weiguo,YUAN Ping,WU Shuangzhang,et al.Crossed Directional Blasting of Two Chimneys under Complex Surroundings[J].EXPLOSIVE MATERIALS,2015,44(03):50.[doi:10.3969/j.issn.1001-8352.2015.01.012]
[7]胡葵.城镇闹市区地铁车站基坑的控制爆破[J].爆破器材,2016,45(06):51.[doi:10.3969/j.issn.1001-8352.2016.06.010]
　HU Kui.Controlled Blasting of Foundation Pit at Subway Station in Downtown Area[J].EXPLOSIVE MATERIALS,2016,45(03):51.[doi:10.3969/j.issn.1001-8352.2016.06.010]
[8]姚显春①②,姚尧①②,寄科祥②,等.城市复杂环境下90 m钢筋砼烟囱的定向爆破拆除[J].爆破器材,2017,46(06):53.[doi:10.3969/j.issn.1001-8352.2017.06.011]
　YAO Xianchun,YAO Yao,JI Kexiang,et al.Directional Blasting Demolition of a 90m-high Steel-concrete Chimney in Urban Complex Environment[J].EXPLOSIVE MATERIALS,2017,46(03):53.[doi:10.3969/j.issn.1001-8352.2017.06.011]
[9]孙飞①,郭文华②,顾云①,等.矮胖式筒仓集群爆破切口参数设计及预处理技术[J].爆破器材,2021,50(01):59.[doi:10.3969/j.issn.1001-8352.2021.01.011]
　SUN Fei,GUO Wenhua,GU Yun,et al.Parameters Design of Blasting Cut and Pretreatment Technology of Chunky Silo Cluster[J].EXPLOSIVE MATERIALS,2021,50(03):59.[doi:10.3969/j.issn.1001-8352.2021.01.011]
[10]黄磊,唐勇,杨建军.大曲率非对称匝道桥爆破拆除[J].爆破器材,2021,50(04):60.[doi:10.3969/j.issn.1001-8352.2021.04.011]
　HUANG Lei,TANG Yong,YANG Jianjun.Explosive Demolition of an Asymmetric Ramp Bridge with Large Curvature[J].EXPLOSIVE MATERIALS,2021,50(03):60.[doi:10.3969/j.issn.1001-8352.2021.04.011]

备注/Memo

备注/Memo:
收稿日期：2022-10-14
基金项目：江苏省地质矿产勘查局科技创新项目（2020KY07）
第一作者：王静(1984－)，女，硕士，高工,研究方向为爆炸技术及爆破施工管理。E-mail:jingwang1008@163.com
通信作者：丁建(1997－)，男，硕士研究生，研究方向为爆炸技术及爆破施工管理。E-mail:1442922890@qq.com
更新日期/Last Update: 2023-06-06