[1]彭云昆,谢元丽,董绍煜,等.乳化炸药含碳组分的选择与应用[J].爆破器材,2021,50(01):44-47.[doi:10.3969/j.issn.1001-8352.2021.01.008]
 PENG Yunkun,XIE Yuanli,DONG Shaoyu,et al.Selection and Application of Carbonaceous Components in Emulsion Explosives[J].EXPLOSIVE MATERIALS,2021,50(01):44-47.[doi:10.3969/j.issn.1001-8352.2021.01.008]
点击复制

乳化炸药含碳组分的选择与应用()
分享到:

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
50
期数:
2021年01
页码:
44-47
栏目:
爆炸材料
出版日期:
2021-01-22

文章信息/Info

Title:
Selection and Application of Carbonaceous Components in Emulsion Explosives
文章编号:
5476
作者:
彭云昆谢元丽董绍煜李小强王庆兰
云南安宁化工厂有限公司(云南昆明,650300)
Author(s):
PENG Yunkun XIE Yuanli DONG Shaoyu LI Xiaoqiang WANG Qinglan
Yunnan Anning Chemical Industry Co., Ltd. (Yunnan Kunming, 650300)
关键词:
乳化炸药含碳组分长链蜡油混合物
Keywords:
emulsion explosive carbonaceous components long-chain wax-oil mixture
分类号:
TD235.2+1;TQ564
DOI:
10.3969/j.issn.1001-8352.2021.01.008
文献标志码:
A
摘要:
结合碳元素在乳化炸药爆炸过程中放热量较大、含碳键和基团较易受激发形成活性粒子、极易在爆炸反应中形成新的活化中心、生成大量气体等特点,对炸药能量释放特性的内在规律进行分析,使乳化炸药配方设计变得直接、简单、实用。应用结果表明,采用含有含碳活性基团和含碳键的长链蜡油混合物作为添加剂,代替部分复合蜡,当添加剂使用比例(质量分数)达到25%及以上时,乳化炸药的爆轰性能显著提高。
Abstract:
In accordance with characteristics that the carbon has a higher heat release during the explosion of the emulsion explosive, the carbon bond bearing and the radical group are easily stimulated to form active particles, the new activation center can be easily formed during the explosive reaction, and a large amount of gas can be generated during the reaction process, the inherent law of energy release characteristics of explosive is explained and analyzed, which makes the formulation design of emulsion explosive direct, simple and practical. Actual application result shows that detonation performance of emulsion explosive is significantly improved when the mass fraction of composite wax reaches 25% or more when the long-chain wax oil mixture containing carbonaceous active group and bond is used as additive.

参考文献/References:

[1]汪旭光.乳化炸药[M].2版.北京:冶金工业出版社, 2008.
[2]汪旭光.氧平衡与乳化炸药的配方设计[J].云南冶金,1983(6):16-19.
[3]王士芝,燕宪雨,陈龙.油相组分对乳化炸药性能影响研究[J].煤矿爆破,2015(4):11-13.
WANG S Z,YAN X Y,CHEN L.Study the components of the oil phase impact on emulsion explosive performance[J].Coal mine blasting,2015(4):11-13.
[4]云主惠.工业炸药组分的选择[J].爆破器材,1984(1):1-4.
[5]韦秉旭,唐健军,吴雄.乳化炸药的配方设计及 BKW 状态方程的应用[J].矿冶工程,2002,22(3):29-31.
WEI B X,TANG J J,WU X.Formulation design of emulsion explosive and application of BKW state equation[J]. Mining and Metallurgical Engineering,2002,22(3):29-31.
[6]宋锦泉,汪旭光.乳化炸药配方优化设计原则及数学模型[J].有色矿冶,1999(6):1-4.
[7]宋锦泉,汪旭光.乳化炸药基质组分选择浅析[J].铜业工程,2001(2):4-6,3. SONG J Q, WANG X G. Analysis on emulsion basic composite selection[J].Copper Engineering,2001(2):4-6,3.
[8]李莉.乳化炸药组分快速分析法[J].爆破器材,1998,27(2):9-11.
LI L. A rapid anglysis of component of emulsion explosive[J].Explosive Materials,1998,27(2):9-11.
[9]万俊华,郜冶,夏允庆.燃烧理论基础[M].2版.哈尔滨:哈尔滨工程大学出版社,2007:48-50.
WAN J H,GAO Y,XIA Y Q.Theoretical basis of combustion[M]. 2nd ed.Harbin:Harbin Engineering University Press,2007:48-50.
[10]DELPUECH A,CHERVILLE J. Symposium on chemical problems connected with the stability of explosives[J].Combustion and Flame,1976,13(2):206-207.
[11]彭云昆,谢元丽,董绍煜,等.一种高性能硬态乳化炸药及其制备方法:CN202010575118.2[P].2020-06-22.

相似文献/References:

[1]熊家权,林华岱.影响乳化炸药性能因素探讨[J].爆破器材,2010,39(01):13.
 XIONG Jiaquan,LIN Huadai.Discussion on Factors Affecting the Performance of Emulsion Explosive[J].EXPLOSIVE MATERIALS,2010,39(01):13.
[2]黄铁飞,荣光富,杨曙光,等.乳化剂对混装乳化炸药质量性能的影响及实践应用[J].爆破器材,2010,39(02):14.
 HUANG Tiefei,RONG Guangfu,YANG Shuguang,et al.Effect of Emulsifier on the Quality Performance of Emulsion Explosive and Its Practical Application[J].EXPLOSIVE MATERIALS,2010,39(01):14.
[3]阮华.用正交试验方法优化乳化炸药设计[J].爆破器材,2010,39(02):23.
 RUAN Hua.The Optimization of the Emulsion Explosive by Using Orthogonal Experimental Method[J].EXPLOSIVE MATERIALS,2010,39(01):23.
[4]李瑛,柏存增.不同敏化条件下乳化炸药减敏的实验研究[J].爆破器材,2011,40(01):19.
 LI Ying,BO Cunzeng.Experimental Research on Reducing Sensitivity of Emulsion Explosive in Different Sensitization Methods[J].EXPLOSIVE MATERIALS,2011,40(01):19.
[5]郭敏,贾海亮,原海青,等.高温敏化工艺乳化炸药储存期影响因素分析[J].爆破器材,2011,40(01):24.
 GUO Min,JIA Hailiang,YUAN Haiqing,et al.Analysis of Influencing Factors on the Storage of Emulsion Explosives by High-temperature Sensitization[J].EXPLOSIVE MATERIALS,2011,40(01):24.
[6]龚兵,熊代余,李国仲,等.BCJ多功能装药车的研究与应用[J].爆破器材,2010,39(03):12.
 GONG Bing,XIONG Daiyu,LI Guozhong,et al.Development and Application of BCJ Multi-function Charge Truck[J].EXPLOSIVE MATERIALS,2010,39(01):12.
[7]王军,王越胜.故障树分析法在乳化炸药生产中的应用概述[J].爆破器材,2010,39(03):15.
 WANG Jun,WANG Yuesheng.Application of Fault Tree Analysis in the Production of Emulsion Explosive[J].EXPLOSIVE MATERIALS,2010,39(01):15.
[8]张翠英,吴龙祥,王永斌.新型高效乳化器的研制及应用[J].爆破器材,2010,39(05):12.
 ZHANG Cuiying,WU Longxiang,WANG Yongbin.Research and Application of the New-type Efficient Emulsifier[J].EXPLOSIVE MATERIALS,2010,39(01):12.
[9]马耀川.全连续化乳化生产线影响炸药爆炸性能的几个因素[J].爆破器材,2010,39(05):20.
 MA Yaochuan.Several Factors Affecting the Performance of Emulsion Explosive in Continuous Production Line[J].EXPLOSIVE MATERIALS,2010,39(01):20.
[10]郑卫东,李峰,潘伟纲.乳化炸药水油相集中制备的应用[J].爆破器材,2010,39(05):22.
 ZHENG Weidong,LI Feng,PAN Weigang.Concentrated Preparation Application for Water and Oil Phase of Emulsion Explosives[J].EXPLOSIVE MATERIALS,2010,39(01):22.

备注/Memo

备注/Memo:
收稿日期:2020-04-29
第一作者:彭云昆(1972-),男,高级工程师,从事工业炸药技术管理及研究工作。E-mail:pyk2003@163.com
更新日期/Last Update: 2021-01-21