[1]卫欣.基于ARM的冲击波测试系统的便携终端设计[J].爆破器材,2016,45(02):57-60.[doi:10.3969/j.issn.1001-8352.2016.02.014]
　WEI Xin.Design of a Portable Terminal Based on ARM for the Test System of Shock Wave Pressure[J].EXPLOSIVE MATERIALS,2016,45(02):57-60.[doi:10.3969/j.issn.1001-8352.2016.02.014]
点击复制

基于ARM的冲击波测试系统的便携终端设计()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
45
期数:
2016年02
页码:
57-60
栏目:
安全与测试
出版日期:
2016-03-27

文章信息/Info

Title:
Design of a Portable Terminal Based on ARM for the Test System of Shock Wave Pressure
文章编号:
5005
作者:
卫欣
中北大学计算机与控制工程学院（山西太原，030051）
Author(s):
WEI Xin 
School of Computer Science and Control Engineering, North University of China (Shanxi Taiyuan, 030051)
关键词:
冲击波; 测试系统; 便携终端; ARM; Qt
Keywords:
shock wave;  test system;  portable terminal;  ARM;  Qt
分类号:
TJ510.6
DOI:
10.3969/j.issn.1001-8352.2016.02.014
文献标志码:
A
摘要:
在冲击波测试中，测试系统的状态难以监测，测试参数一旦设置不当便无法现场更改；而以PC为系统的控制终端，在户外试验时存在操作不便、不易携带的缺点。针对以上问题，设计了基于ARM的便携控制终端。利用Qt技术设计了图形控制界面，对无线通信进行了性能测试。手持终端通过无线控制测试系统，实现了对测试系统状态的监测、数据的无线传输与波形显示。将手持终端应用于弹药试验，结果表明，其具有良好的可靠性和稳定性。
Abstract:
In the measurement of shock wave overpressure, the status of test system is hard to be monitored, and test parameters could not be adjusted on site once they are improperly set up. Meanwhile, it is inconvenient to operate and hard to carry the traditional PC in outdoor experiments. In order to solve such problems, a portable control terminal for shock wave pressure test system based on ARM was designed. The graphic application program was developed by the software of Qt.Performance test in the actual explosion environment was used to verify the reliability and stability of wireless communication. The functions of system state monitoring,data transmittal by wireless and waveform display could be realized by the portable terminal with wireless test system. Results show that the portable terminal has good stability and reliability in real explosion experiments.

参考文献/References:

［1］张少杰,马铁华,沈大伟.低功耗爆炸冲击波应变测试系统［J］.传感技术学报,2011,24(9):1359-1362.
ZHANG S J, MA T H, SHEN D W. Lowpower blast shock wave strain test system［J］. Chinese Journal of Sensors and Actuators, 2011,24(9):1359-1362.
［2］朱满林,石成英,蔡星会,等.基于ICP技术的炸药冲击波压力测定［J］.爆破器材,2012,41(4):30-32.
ZHU M L, SHI C Y, CAI X H, et al .Shock wave pressure measurement of explosive based on ICP technology［J］. Explosive Materials, 2012,41(4):30-32.
［3］KLASEBOER E,HUNG K C,WANG C,et al.Experimental and numerical investigation of the dynamics of an underwater explosion bubble near a resilient/rigid structure ［J］.Journal of Fluid Mechanics, 2005,537:387-413.
［4］王代华,宋林丽，张志杰.基于ICP传感器的存储式冲击波超压测试系统［J］.传感技术学报,2012,25(4)：478-482.
 WANG D H，SONG L L，ZHANG Z J. A stored overpressure measurement system based on ICP sensor for shock wave［J］. Chinese Journal of Sensors and Actuators, 2012,25(4):478-482.
［5］马铁华，祖静．冲击波超压存储测试技术研究［J］.仪器仪表学报，2004，25(s1)：134-135,146．
MA T H，ZU J．Shock wave pressure measurement by memorized technique［J］．Chinese Journal of Scientific Instrument，2004，25(s1):134-135,146．
［6］赵岩，马铁华，杜红棉,等.基于FPGA和无线通信的冲击波超压采集系统设计［J］.工程设计学报,2011,18(6):449-452.
 ZHAO Y，MA T H，DU H M，et al. Design of shock wave overpressure acquisition system based on FPGA and wireless communication ［J］. Journal of Engineering Design,2011,18(6):449-452.
［7］张哲，李宝珠，王存宝,等.基于无线数据传输的冲击波超压测试系统的研究［J］.传感器与微系统,2009,28(6):7-9.
 ZHANG Z，LI B Z，WANG C B，et al. Study on shock wave test system based on wireless data transmission ［J］. Transducer and Microsystem Technologies,2009,28(6):7-9.
［8］SALLAI J，VOLGYESI P，PENCE K，et al．Fusing distributed muzzle blast and shockwave detections［C］//Proceedings of the 14th International Conference on Information Fusion.Chicago，Illinois，USA，2011：1-8．
［9］王健，裴东兴，王薇．XXX爆炸威力场远距离多参数数据采集系统［J］．传感技术学报，2013，26(4)：516-519．
WANG J, PEI D X, WANG W. The remote multiparameter’s data acquisition system of XXX explosion power field［J］. Chinese Journal of Sensors and Actuators, 2013,26(4):516-519.
［10］董冰玉，杜红棉，祖静．基于无线控制的冲击波超压测试系统［J］．传感技术学报，2010，23(2)：279-281．
DONG B Y, DU H M, ZU J. The blast wave overpressure measuring system based on wirelesscontrol［J］.Chinese Journal of Sensors and Actuators,2010,23(2):279-281.
［11］孔祥善，赵德光，王代华,等.低空信道对无线传感器网络的影响分析［J］．传感技术学报，2011,24(1):106-110.
 KONG X S, ZHAO D G, WANG D H, et al. The impact analysis of wireless sensor network in lowlevel channel［J］.Chinese Journal of Sensors and Actuators, 2011,24(1):106-110.
［12］张霞，张志杰，轩志伟.基于ARM和WiFi的测试系统手持终端的设计［J］．电视技术，2013,37(15):74-76,161.
 ZHANG X, ZHANG Z J, XUAN Z W. Design of wireless portable terminal based on ARM and WiFi［J］.Video Engineering. 2013,37(15):74-76,161.

相似文献/References:

[1]史长根,洪津,蒋国良,等.爆炸焊接危害机理分析[J].爆破器材,2009,38(03):28.
　SHI Changgen,HONG Jin,JIANG Guoliang,et al.Harm Mechanism Analysis of Explosive Welding[J].EXPLOSIVE MATERIALS,2009,38(02):28.
[2]史长根,尤峻,周祥,等.高压容器试验仓安全评估计算方法研究[J].爆破器材,2011,40(04):32.
　SHI Changgen,YOU Jun,ZHOU Xiang,et al.Study on Computational Method of Safe Evaluation for Test House of High Pressure Gases Vessel Explosion Hazards[J].EXPLOSIVE MATERIALS,2011,40(02):32.
[3]徐全军①,渠银录①,姜楠①,等.某炸药库内爆作用下坑道内隔爆防护墙厚度估算[J].爆破器材,2012,41(02):34.
　XU Quanjun,QU Yinglu,JIANG Nan,et al.Thickness Calculation of Tunnel Explosion Protection Wall under the Blasting Destroy in Explosive Magazine[J].EXPLOSIVE MATERIALS,2012,41(02):34.
[4]朱满林,石成英,蔡星会,等.基于ICP技术的炸药冲击波压力测定[J].爆破器材,2012,41(04):30.
　ZHU Manlin,SHI Chengying,CAI Xinghui,et al.Shock Wave Pressure Measurement of Explosive Based on ICP Technology[J].EXPLOSIVE MATERIALS,2012,41(02):30.
[5]连赟猛①,方道红②,顾晓辉①,等.典型密闭装置内爆炸尺寸效应研究[J].爆破器材,2012,41(05):1.
　LIAN Yunmeng,FANG Daohong,GU Xiaohui,et al.Effect of Scales on Typical Closed Structure Due to Internal Explosion[J].EXPLOSIVE MATERIALS,2012,41(02):1.
[6]李鸿宾,王建灵,张为鹏,等.铝粉比表面积与质量分数对浆状温压炸药爆炸冲击波影响的实验研究[J].爆破器材,2013,42(01):5.[doi:10.3969/j.issn.1001-8352.2013.01.002]
　LI Hongbin,WANG Jianling,ZHANG Weipeng,et al.Experiment Study on the Effect of Specific Surface Area and Content of Aluminum Powder on Shock Wave Output of Slurry TBE[J].EXPLOSIVE MATERIALS,2013,42(02):5.[doi:10.3969/j.issn.1001-8352.2013.01.002]
[7]杨亚东,李向东,王晓鸣.爆炸冲击波空中传播特征参量的优化拟合[J].爆破器材,2014,43(01):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
　YANG Yadong,LI Xiangdong,WANG Xiaoming.Optimum Fitting for Characteristic Parameters of Blast Shockwaves Traveling in Air[J].EXPLOSIVE MATERIALS,2014,43(02):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
[8]胡宏伟①,鲁忠宝②,郭炜①,等.水中爆炸的殉爆试验方法[J].爆破器材,2014,43(03):25.[doi:10.3969/j.issn.1001-8352.2014.03.006]
　HU Hongwei,LU Zhongbao,GUO Wei,et al.The Method of Sympathetic Detonation Experiment in Water[J].EXPLOSIVE MATERIALS,2014,43(02):25.[doi:10.3969/j.issn.1001-8352.2014.03.006]
[9]夏永乐①②,张志杰①②,翟永①②,等.基于FPGA+ARM+WIFI的炸药冲击波超压采集系统设计[J].爆破器材,2015,44(01):55.[doi:10.3969/j.issn.1001-8352.2015.01.013]
　XIA Yongle,ZHANG Zhijie,ZHAI Yong,et al.Design of Explosive Acquisition System for Shock Wave Overpressure Based on FPGA+ARM+WIFI[J].EXPLOSIVE MATERIALS,2015,44(02):55.[doi:10.3969/j.issn.1001-8352.2015.01.013]
[10]史长根,尤峻.双立式爆炸焊接新方法[J].爆破器材,2008,37(03):28.
　Shi Changgen,You Jun.New Technology of Double Vertical Explosive Welding[J].EXPLOSIVE MATERIALS,2008,37(02):28.

备注/Memo

备注/Memo:
收稿日期：2015-07-10
作者简介：卫欣（1990~），男，硕士研究生，主要从事自动控制原理研究。E-mail：340225944@qq.com
更新日期/Last Update: 2016-03-28