[1]严家佳①,王建灵①,张哲②,等.传爆药冲击波感度试验方法的简化研究[J].爆破器材,2015,44(06):51-53,59.[doi:10.3969/j.issn.1001-8352.2015.06.012]
 YAN Jiajia,WANG Jianling,ZHANG Zhe,et al.Simplified Shock Wave Sensitivity Test Method of Booster Explosives[J].EXPLOSIVE MATERIALS,2015,44(06):51-53,59.[doi:10.3969/j.issn.1001-8352.2015.06.012]
点击复制

传爆药冲击波感度试验方法的简化研究()
分享到:

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
44
期数:
2015年06
页码:
51-53,59
栏目:
出版日期:
2015-12-03

文章信息/Info

Title:
Simplified Shock Wave Sensitivity Test Method of Booster Explosives
文章编号:
4937
作者:
严家佳王建灵张哲李鸿宾杨斐
①西安近代化学研究所(陕西西安,710065)
②中国北方化学工业集团有限公司(北京,100083)
Author(s):
YAN Jiajia WANG Jianling ZHANG Zhe LI Hongbin YANG Fei
①Xi’an Modern Chemistry Research Institute(Shaanxi Xi’an, 710065)
②China North Chemical Industries Group Co., Ltd. (Beijing, 100083)
关键词:
爆炸力学炸药安全性传爆药冲击波感度小隔板试验
Keywords:
explosion mechanicssafety performance of explosives booster explosiveshock wave sensitivitySSGT small gap test
分类号:
TJ410.1
DOI:
10.3969/j.issn.1001-8352.2015.06.012
文献标志码:
A
摘要:
尝试了一种用压装A-IX-I(RDX与钝感剂质量比为95:5)药柱替代纯RDX作为施主药柱进行冲击波感度试验(SSGT)的方法,通过零隔板试验,检验了施主药柱的爆炸能量输出性能。所得施主药柱的平均质量为1 195.5 mg,相对误差0.495%;鉴定块的平均凹痕深度1.769 mm,相对误差0.96%,说明压装法得到的施主药柱性能较好。利用该方法研究了JH-14传爆药经过高温加速老化前后的冲击波感度,结果显示,老化后的样品冲击波感度具有增加的趋势。
Abstract:
A new type of small scale gap test method (SSGT), in which RDX was substitutedby A-IX-I [m(RDX)m(insensitive agent)=95:5]as donor casts, wasintroduced to study thesensitivity of shock wave. The explosion energy output performance of donor explosives was tested by a group of none gap tests. Result shows that the average mass of donor explosives is 1 195.5 mg, and the relatively error is 0.495%; the average pitting depth of identification slab is 1.769mm, and relatively error is 0.96%. It indicates that donor explosive has a good performance. This method was used to study the shock wave sensitivity of JH-14 before or after aging testsathigh temperatures.It shows that the aged explosives tend to have higher shock wave sensitivity, and the sensitivity increases with the increase of age time of accepters.

参考文献/References:

[1]传爆药安全性试验方法:GJB2178—1994 [S].北京:中国标准出版社,1994.
[2]刘玉存,王作山,柴涛,等. HMX粒度及其级配对塑料粘结炸药冲击波感度和爆炸输出能量的影响[J].兵工学报,2000,12(4):357-359.
 LIU Y C, WANG Z S, CHAI T, et al. Influence of HMX particle size and gradation on the shock sensitivity and output of a PBX explosive[J]. Acta Armamentaria, 2000,12(4):357-359.
[3]高大元,申春迎,文尚刚,等.加速老化对炸药件安全性的影响研究[J].含能材料,2011,19(6):673-678.
 GAO D Y, SHEN C Y, WEN S G, et al. Accelerated aging on effect of safety for explosive parts[J]. Chinese Journal of Energetic Materials, 2011,19(6):673-678.
[4]封雪松.一种重结晶黑索金的冲击波感度研究[J].含能材料,2007,15(6):581-584.
 FENG X S. The shock sensitivity of a rscrystallizing RDX[J].Chinese Journal of Energetic Materials,2007,15(6):581-584.
[5]代晓淦,向永,申春迎. 用抛射弹撞击法(Steven试验)研究PBX-2炸药加速老化前后反应能力[J].含能材料,2006,14(6):453-456.
DAI X G, XIANG Y, SHEN C Y. Reaction ability of PBX-2 before and after accelerated aging by projectile impact(Steven test)[J]. Chinese Journal of Energetic Materials,2006,14(6):453-456.
[6]王晓峰,戴蓉兰,涂健.钝感传爆药HBM-1的配方设计[J].火工品,2002 (2):30-31.
 WANG X F, DAI R L, TU J. Formulation design of the insensitive booster composition JHB-1[J].Initiators & Pyrotechnics, 2002 (2):30-31.
[7]FREY R B. Cavity collapse in energetic materials:technical report of army ballistic research lab aber deen proving ground:ADA 172513[R].1986.
[8]章冠人,陈大年.凝聚炸药起爆动力学[M].北京:国防工业出版社,1991.

相似文献/References:

[1]安二峰,杨军,陈鹏万.高锰钢整铸辙叉爆炸硬化实践与研究[J].爆破器材,2009,38(02):25.
 AN Erfeng,YANG Jun,CHEN Pengwan.Study on Explosive Hardening of Hadfield Steel Rail Frogs[J].EXPLOSIVE MATERIALS,2009,38(06):25.
[2]徐森①,张兴明①,潘峰①,等.工业炸药能量测试方法的分析[J].爆破器材,2013,42(01):18.[doi:10.3969/j.issn.1001-8352.2013.01.005]
 XU Sen,ZHANG Xingming,PAN Feng,et al.Analysis on the Energy Testing Methods of Industrial Explosives[J].EXPLOSIVE MATERIALS,2013,42(06):18.[doi:10.3969/j.issn.1001-8352.2013.01.005]
[3]臧立伟,尹建平,王志军.轴向预制破片战斗部的设计研究[J].爆破器材,2013,42(02):5.[doi:10.3969/j.issn.1001-8352.2013.02.002]
 ZANG liwei,YIN Jianping,WANG Zhijun.Optimizing Design of Axial Prefabricated Fragments[J].EXPLOSIVE MATERIALS,2013,42(06):5.[doi:10.3969/j.issn.1001-8352.2013.02.002]
[4]姚志华,李德战,付庆海,等.偏心亚半球成型装药结构的数值模拟[J].爆破器材,2013,42(02):17.[doi:10.3969/j.issn.1001-8352.2013.02.005]
 YAO Zhihua,LI Dezhan,FU Qinghai,et al.Numerical Simulation of Shape Charge with an Eccentric Subhemisphere Liner[J].EXPLOSIVE MATERIALS,2013,42(06):17.[doi:10.3969/j.issn.1001-8352.2013.02.005]
[5]杨亚东,李向东,王晓鸣.爆炸冲击波空中传播特征参量的优化拟合[J].爆破器材,2014,43(01):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
 YANG Yadong,LI Xiangdong,WANG Xiaoming.Optimum Fitting for Characteristic Parameters of Blast Shockwaves Traveling in Air[J].EXPLOSIVE MATERIALS,2014,43(06):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
[6]金朋刚,郭炜,任松涛,等.TNT密闭环境中能量释放特性研究[J].爆破器材,2014,43(02):10.[doi:10.3969/j.issn.1001-8352.2014.02.003]
 JIN Penggang,GUO Wei,REN Songtao,et al.Research on TNT Energy Release Characteristics in Enclosed Condition[J].EXPLOSIVE MATERIALS,2014,43(06):10.[doi:10.3969/j.issn.1001-8352.2014.02.003]
[7]冯海云,胡宏伟,赵向军,等.一种评估炸药作功能力的新测试方法[J].爆破器材,2014,43(02):33.[doi:10.3969/j.issn.1001-8352.2014.02.008]
 FENG Haiyun,HU Hongwei,ZHAO Xiangjun,et al.A New Test Method to Assess the Acting Ability of Explosive[J].EXPLOSIVE MATERIALS,2014,43(06):33.[doi:10.3969/j.issn.1001-8352.2014.02.008]
[8]郑思友,翟廷海,夏斌.工业雷管抗弯性能试验装置与方法设计[J].爆破器材,2014,43(03):33.[doi:10.3969/j.issn.1001-8352.2014.03.008]
 ZHENG Siyou,ZHAI Tinghai,XIA Bin.Testing System and Method Design of the Bending Resistance of Industrial Detonator[J].EXPLOSIVE MATERIALS,2014,43(06):33.[doi:10.3969/j.issn.1001-8352.2014.03.008]
[9]杨斐,王建灵,罗一鸣,等.DNTF/AP/Al体系炸药的能量特性分析[J].爆破器材,2014,43(05):11.[doi:10.3969/j.issn.1001-8352.2014.05.003]
 YANG Fei,WANG Jianling,LUO Yiming,et al.Explosion Energy Characteristics of DNTF/AP/Al Explosive[J].EXPLOSIVE MATERIALS,2014,43(06):11.[doi:10.3969/j.issn.1001-8352.2014.05.003]
[10]沈飞,王辉,余然,等.两种含铝炸药水中近场冲击波传播规律研究[J].爆破器材,2014,43(05):26.[doi:10.3969/j.issn.1001-8352.2014.05.006]
 SHEN Fei,WANG Hui,YU Ran,et al.Propagation Characteristics of Close-field Shock Wave for Two Aluminized Explosives by Underwater Explosion[J].EXPLOSIVE MATERIALS,2014,43(06):26.[doi:10.3969/j.issn.1001-8352.2014.05.006]

备注/Memo

备注/Memo:
收稿日期:2015-02-04
作者简介:严家佳(1985~),男,硕士,主要从事爆炸性能评估技术方面的研究。E-mail:241049625@qq.com
更新日期/Last Update: 2015-12-03