参考文献/References:
[1]叶海旺,康强,赵明生,等.节理裂隙岩体空气间隔装药爆破试验研究[J].爆破,2012,29(2):26-30,37.
Ye Haiwang,Kang Qiang,Zhao Mingsheng,et al. Experimental study on airdecking charging explosion in jointed and fractured rock mass [J]. Blasting ,2012,29(2):26-30,37.
[2]胡燕武,林文勇. 现场混装乳化炸药在华润红水河公司露天矿山的应用[J].爆破,2011,28(4):53-56.
Hu Yanwu,Lin Wenyong. Application of onsite mixed emulsion explosive in China resources Hongshuihe Cement open mine[J]. Blasting ,2011,28(4):53-56.
[3]秦院波.混装乳化炸药在拉拉铜矿露天深孔爆破的应用与探讨[J].采矿技术,2008,8(4):133-134,143.
[4]叶海旺,吴凯,王洋,等.多孔粒状混装铵油炸药爆炸性能试验研究[J].爆破,2011,28(1):100-103.
Ye Haiwang,Wu Kai, Wang Yang,et al. Experiment research on explosion performance of mixed ANFO explosive[J].Blasting,2011,28(1):100-103.
[5]叶图强,郑旭炳,汪旭光,等.装药车制乳化炸药的试验研究[J].含能材料,2008,16(3):262-266.
Ye Tuqiang ,Zheng Bingxu Wang Xuguang,et al. Experimental study on emulsion explosive made by loading machine[J].Chinese Journal of Energetic Materials ,2008,16(3):262-266.
[6]荣光富,汪兴国,张道振,等. 现场混装乳化炸药不耦合装药技术及工程实践[J].爆破器材,2010,39(6):22-25.
Rong Guangfu,Wang Xingguo,Zhang Daozhen,et al. Research and application of decouple charge blasting for site mixing emulsion explosive[J]. Explosive Materials,2010,39(6):22-25.
[7]黄泽斌.德兴铜矿露天爆破隔离塞的研制与应用[J].金属矿山,2008(1):151-152.
[8]仲峰,苗涛,刘侃. 混装乳化炸药车装药控制系统关键问题的研究[J]. 爆破,2011,28(4):90-92,96. Zhong Feng,Miao Tao,Liu Kan. Research of key problems on charging control system of site mixed truck for emulsion explosive[J].Blasting, 2011,28(4):90-92,96.
[9]王清华,宋领,付军,等. 改进层次分析法分析现场混装乳化炸药爆破成本影响因素[J].爆破器材,2009,38(5):14-18. Wang Qinghua,Song Ling, Fu Jun,et al. Analysis of cost factors for site mixed emulsion explosive blasting by improved analytic hierarchy process[J]. Explosive Materials,2009,38(5):14-18.
[10]王玉杰.爆破工程[M].武汉:武汉理工大学出版社,2007.
相似文献/References:
[1]荣光富,汪兴国,张道振,等.现场混装乳化炸药不耦合装药技术及工程实践[J].爆破器材,2010,39(06):22.
RONG Guangfu,WANG Xingguo,ZHANG Daozhen,et al.Research and Application of Decouple Charge Blasting for Site Mixing Emulsion Explosive[J].EXPLOSIVE MATERIALS,2010,39(04):22.
[2]牛毓,吴嫡,李娜.环烷基侧线馏分油制备混装乳化炸药复合油[J].爆破器材,2016,45(04):41.[doi:10.3969/j.issn.1001-8352.2016.04.009]
NIU Yu,WU Di,LI Na.Preparation of Composite Oil for the On-site Mixed Emulsion Explosive with Naphthenic Side Stream Distillate[J].EXPLOSIVE MATERIALS,2016,45(04):41.[doi:10.3969/j.issn.1001-8352.2016.04.009]
[3]张建州,刘大维.大孔径深孔含水爆破混装乳化炸药性能研究[J].爆破器材,2017,46(03):36.[doi:10.3969/j.issn.1001-8352.2017.03.007]
ZHANG Jianzhou,LIU Dawei.Properties of Mixed Emulsion Explosive Used in Large-diameter Deep-hole Water-bearing Blasting[J].EXPLOSIVE MATERIALS,2017,46(04):36.[doi:10.3969/j.issn.1001-8352.2017.03.007]
[4]熊言涛①,魏善太①,吴继昌②,等.一种上向深孔现场混装用乳胶基质的研究[J].爆破器材,2020,49(04):39.[doi:10.3969/j.issn.1001-8352.2020.04.007]
XIONG Yantao,WEI Shantai,WU Jichang,et al.Study on an Emulsion Matrix Used for Upward Deep Hole[J].EXPLOSIVE MATERIALS,2020,49(04):39.[doi:10.3969/j.issn.1001-8352.2020.04.007]
[5]吴勇①,周建敏①,汪帅文①,等.剪切参数对混装乳化炸药稳定性及爆炸性能的影响[J].爆破器材,2024,53(03):10.[doi:10.3969/j.issn.1001-8352.2024.03.002]
WU Yong,ZHOU Jianmin,WANG Shuaiwen,et al.Influence of Shear Parameters on the Stability and Explosion Performance of Mixed Emulsion Explosives[J].EXPLOSIVE MATERIALS,2024,53(04):10.[doi:10.3969/j.issn.1001-8352.2024.03.002]