[1]罗同杰,宁灵生.废旧聚能射孔弹的平地烧毁处理[J].爆破器材,2013,42(02):53-56.[doi:10.3969/j.issn.1001-8352.2013.02.014]
　LUO Tongjie,NING Lingsheng.Burning Treatment of Scrapped Shaped Charges on the Plain[J].EXPLOSIVE MATERIALS,2013,42(02):53-56.[doi:10.3969/j.issn.1001-8352.2013.02.014]
点击复制

废旧聚能射孔弹的平地烧毁处理()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
42
期数:
2013年02
页码:
53-56
栏目:
出版日期:
2013-04-20

文章信息/Info

Title:
Burning Treatment of Scrapped Shaped Charges on the Plain
文章编号:
4571
作者:
罗同杰; 宁灵生
豫西集团有限公司销毁中心（河南云阳，474678）
Author(s):
LUO Tongjie; NING Lingsheng
Disposal Center of Yuxi Industries Group Co., Ltd. (He’nan Yunyang, 474678)
关键词:
销毁; 聚能射孔弹; 平地烧毁
Keywords:
destruction;  shaped charges;  burning on the plain
分类号:
TQ560.79 TJ510.89
DOI:
10.3969/j.issn.1001-8352.2013.02.014
文献标志码:
A
摘要:
文章对销毁废旧聚能射孔弹常采用的几种方法的优、缺点进行了介绍。从对聚能射孔弹的结构特点及其所装填炸药特性的分析出发，提出了平地烧毁法销毁聚能射孔弹的依据、原理，描述了采用此方法的单个产品烧毁实验和小批量产品烧毁实验情况。总结出单次批量烧毁1000多发（总装药量为45kgTNT当量）废旧聚能射孔弹的具体流程、做法。以实际处理60万发聚能射孔弹为例，平地烧毁法可比炸毁法直接节约炸药3750kg、节约雷管7500发。在安全性、经济性等方面，平地烧毁法比炸毁法具有较大优越性。
Abstract:
Merits and drawbacks of the commonly used destruction methods for waste shaped charges are introduced in this paper. Base on the analysis of the shaped charge structure and loading explosive characteristics, the basis and principle of the ground burning destruction method for the shaped charges is suggested. Single product burning experiment and small batch products burning test are both described. Specific procedures of burning a single batch 1000 multiple (Total charge of 45 kgTNT equivalent) waste shaped charges are summarized. Taking the actual treatment of 600000 cases of perforating charges for example, flat burnt directly could save 3750 kg explosive comparable to blow up, and saving cap 7500 as well. It shows great superiority in the terms of safety and economy of the ground burning method than blow up method.

参考文献/References:

［1］郭鹏,付代轩.报废射孔弹销毁方法初探［J］.国外测井技术,2000,15(2):50-52.
 Guo Peng,Fu Daixuan. Perforating method of destruction of waste［J］.Foreign Well Logging Technology,2000,15(2):50-52.
［2］巩永孝,刘国庆,可勇.报废通用弹药处理技术［M］.北京:解放军出版社，2004:55.
［3］大庆油田油井射孔编写组.油井射孔［M］.北京:科学出版社,1978：25
［4］孙国祥,王晓峰,孙富根,等.油气井射孔器用炸药及其安全性［J］.爆破器材,2002,31(2):4-9.
 Sun Guoxiang ,Wang Xiaofeng ,Sun Fugen, et al. Explosives for the perforators of oil and gas wells and their safety［J］. Explosive Materials, 2002,31(2):4-9.［5］孙国祥, 梁永贞, 党兰. 油气井射孔弹用炸药［J］. 测井技术, 1996, 20( 4)：297-302.
Sun Guoxiang ,Liang Yongzhen,Dang Lan.Explosives for perforating charges of oil and gas wells［J］. Well Logging Technology,1996, 20( 4)：297-302.
［6］牛超群，张玉金.油气井完井射孔技术［M］.北京：石油工业出版社，1994:1.
［7］娄建武，龙源，谢兴博.废弃火炸药和常规弹药的理论与销毁技术［M］.北京：国防工业出版社，2007:143.
［8］许贵君,丁玉奎,储俊，等. 报废迫击炮弹烧毁处理［J］.装备环境工程,2009,6(3):88-91.
Xu Guijun,Ding Yukui,Chujun,et al. Disposal of scrapped mortar shell by burning down［J］.Equipment Environmental Engineering,2009,6(3):88-91.
［9］贾晓东.带壳装药有控烧毁技术及爆炸防护研究［D］.石家庄：军械工程学院，2005.
 Jia Xiaodong. The shelled charge control burned and explosion protection research ［D］. Shijiazhuang :Ordnance Engineering Colleage, 2005. 
［10］高欣宝.废品弹药烧毁作业过程的安全管理［J］.安全,1998，19(3):8-10.
 Gao Xinbao. Waste of ammunition burning process safety management［J］.Safety, 1998，19(3):8-10.
［11］齐世福，田永良，王飞.废旧弹药装运与销毁技术综述［J］.爆破器材,2011，40(4):26-31.
Qi Shifu, Tian Yongliang, Wang Fei. Overview on shipping and destruction technology of abandoned ammunition［J］.Explosive Materials,2011，40(4):26-31.

相似文献/References:

[1]谷智国、,杜润生,张怀智,等.用车载式烧毁炉销毁废雷管方法研究[J].爆破器材,2009,38(06):24.
　GU Zhiguo,DU Runsheng,ZHANG Huaizhi,et al.Research on the Method of Disposing Waste Detonators with Mounted Destruction Furnace[J].EXPLOSIVE MATERIALS,2009,38(02):24.

备注/Memo

备注/Memo:
收稿日期：2012-11-16
作者简介：罗同杰(1965~)，男，工程师，主要从事废旧弹药拆分销毁处理的研究。
更新日期/Last Update: 2013-04-28