[1]赖康华,杜明章,王庆兵,等.钨铜粉末药型罩射孔弹对钢靶侵彻的数值模拟[J].爆破器材,2012,41(01):7-10.
　LAI Kanghua,DU Mingzhang,WANG Qingbin,et al.Numerical Simulation of Penetrating Steel Target from Tungsten and Copper Powder Liners Perforating Bullets[J].EXPLOSIVE MATERIALS,2012,41(01):7-10.
点击复制

钨铜粉末药型罩射孔弹对钢靶侵彻的数值模拟()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
41
期数:
2012年01
页码:
7-10
栏目:
基础理论
出版日期:
2012-02-20

文章信息/Info

Title:
Numerical Simulation of Penetrating Steel Target from Tungsten and Copper Powder Liners Perforating Bullets
文章编号:
4422
作者:
赖康华; 杜明章; 王庆兵; 赵世华 
四川石油射孔器材有限责任公司（四川隆昌,642177）
Author(s):
LAI Kanghua;  DU Mingzhang;  WANG Qingbin;  ZHAO Shihua
Sichuan Petroleum Perforating Materials Co., Ltd. (Sichuan Longchang, 642177)
关键词:
钨铜粉末药型罩; 数值模拟; ALE算法; 侵彻
Keywords:
Tungsten and Copper powder liner;  numerical simulation;  ALE algorithm;  penetration
分类号:
TJ510.1 TD235.2+2
文献标志码:
A
摘要:
利用Ansys/Ls-Dyna软件对钨铜粉末药型罩射孔弹侵彻钢靶过程进行了数值模拟。运用混合物的叠加原理对钨铜混合材料的状态方程参数进行了计算，得到钨铜（20W80Cu）粉末药型罩的参数。采用多物质ALE算法，模拟了钨铜药型罩射流的形成及侵彻钢靶的过程，模拟89型号射孔弹作用45#钢靶，穿深为153mm，孔径为9.6mm，并与实际情况对比，数值模拟结果与实验结果差别在5%以内。
Abstract:
Penetrating steel target process of Tungsten and Copper powder liners perforating bullets was simulated through numerical method of the Ansys/Ls-Dyna software. Tungsten-Copper (20W80Cu) mixed material equation of state parameters were calculated based on the mixture of the superposition principle. Multi-material Arbitrary Lagrangian Eulerian (ALE) algorithm is used to simulate the formation process of the shaped charge jet and penetrating steel target process. The type 89 perforating charges for 45# steel target of perforation depth 153 mm, diameter 9.6mm, is simulated. Compared with the actual situation, the results of numerical simulation are close to experimental results within 5% difference.

参考文献/References:

［1］Jamet F., Lichtenberger A. Investigation of copperTungsten Shaped Charge Lmers［C］// Proceedings of 9th Thtemational Symposium on Ballistics. England, 1986：233-236.
［2］Lee S., Kim E. P.，Kim Y.，et al. Penetration performances of tungstencopper shaped charge liner［C］//Proceedings of 22nd Internatoonal Symposium on Ballistics. Canada，2005：437-443.
［3］李如江，沈兆武，刘天生，等.铜粉末药型罩试验研究［J］.工程爆破，2008，14（3）：18-20.
［4］王凤英，刘天生，苟瑞君,等.钨铜镍合金药型罩的研究［J］.兵工学报，2001，22(1)：112-114.
［5］雷锋斌，曹瑞林.钨铜粉末药型罩形成聚能射流的数值模拟［J］.火炸药学报，2010，33(6)：112-114.
［6］胡晓艳，刘天生，王凤英，等.大角度聚能装药射流形成及对钢靶侵彻的数值模拟［J］.弹箭与制导学报，2011，31(1)：97-99.
［7］时党勇，李欲春，张胜民.基于ANSYS/LSDYNA 8.1进行显示动力分析［M］.北京：清华大学出版社，2005:198-200.
［8］朱亮，李慧子，王晓鸣，等.炸药材料性能参数对JPC成型的影响［J］.四川兵工学报，2011，32(3)：14-16.
［9］Meyer M A. Dynamic Behavior of Materials ［M］.New York: John Wiley and sons，inc.1994:327-339.

相似文献/References:

[1]郭涛,高振儒,范磊,等.不同位置条件下减震沟减震效应的数值模拟[J].爆破器材,2010,39(02):7.
　GUO Tao,GAO Zhenru,FAN Lei,et al.Numerical Simulation of Damping Effect of Damping Ditch with Different Location[J].EXPLOSIVE MATERIALS,2010,39(01):7.
[2]朱铭颉,顾文彬,唐勇,等.炸高对侵彻效应影响试验和数值模拟研究[J].爆破器材,2010,39(02):31.
　ZHU Mingjie,GU Wenbin,TANG Yong,et al.The Experimental & Numerical Simulation of the Standoff Effect to Penetra[J].EXPLOSIVE MATERIALS,2010,39(01):31.
[3]张世林,周春桂,王志军,等.一种新型水射流切割器成型的仿真研究[J].爆破器材,2011,40(02):5.
　ZHANG Shilin,ZHOU Chungui,WANG Zhijun.Simulation and Research on Water Jet Formation of a New Type Molding Cutter[J].EXPLOSIVE MATERIALS,2011,40(01):5.
[4]姚志华,王志军,付璐,等.半正方形罩线型切割器的数值模拟研究[J].爆破器材,2011,40(02):11.
　YAO Zhihua,WANG Zhijun,FU Lu,et al.Numerical Simulation of Linear Cutter with Semi-square Liner[J].EXPLOSIVE MATERIALS,2011,40(01):11.
[5]刘好全,何洋扬,张洋溢.爆轰波斜入射金属材料的模拟计算[J].爆破器材,2009,38(06):1.
　LIU Haoquan,HE Yangyang,ZHANG Yangyi.Simulation on the Oblique Reflection of Detonation Waves at the ExplosiveMetal Interface[J].EXPLOSIVE MATERIALS,2009,38(01):1.
[6]安二峰,杨军,陈鹏万.高锰钢整铸辙叉爆炸硬化实践与研究[J].爆破器材,2009,38(02):25.
　AN Erfeng,YANG Jun,CHEN Pengwan.Study on Explosive Hardening of Hadfield Steel Rail Frogs[J].EXPLOSIVE MATERIALS,2009,38(01):25.
[7]徐全军,白帆,伍睿星.占据式聚能装药射流形成的数值模拟及试验研究[J].爆破器材,2011,40(03):11.
　XU Quanjun,BAI Fan,WU Ruixing.Numerical Simulation of Jet Formation by Shaped Charge with the Inhibitor and Experimental Investigation[J].EXPLOSIVE MATERIALS,2011,40(01):11.
[8]成凤生,宋浦,顾晓辉,等.TNT装药爆炸波在刚性平面上方传播反射的数值研究[J].爆破器材,2011,40(04):1.
　CHENG Fengsheng,SONG Pu,GU Xiaohui,et al.Numerical Investigation into the Propagation and Reflection of TNT Blast Wave above Rigid Plane[J].EXPLOSIVE MATERIALS,2011,40(01):1.
[9]史长根,尤峻,周祥,等.高压容器试验仓安全评估计算方法研究[J].爆破器材,2011,40(04):32.
　SHI Changgen,YOU Jun,ZHOU Xiang,et al.Study on Computational Method of Safe Evaluation for Test House of High Pressure Gases Vessel Explosion Hazards[J].EXPLOSIVE MATERIALS,2011,40(01):32.
[10]贾伟①②,吴国东①,王志军①,等.药型罩结构对环形爆炸成型弹丸形成的影响[J].爆破器材,2011,40(06):8.
　JIA Wei,WU Guodong,WANG Zhijun,et al.Influence of Liner Structure on Forming Process of Annular EFP[J].EXPLOSIVE MATERIALS,2011,40(01):8.

备注/Memo

备注/Memo:
收稿日期：2011-09-27
作者简介：赖康华（1984~），男，硕士，主要从事石油射孔弹研究。
更新日期/Last Update: 2012-03-12