[1]史长根,冯叔瑜,史和生,等.3Cr13Mo-42CrMo高耐磨耐蚀爆炸焊接复合轧辊试验研究[J].爆破器材,2010,39(05):28-30.
　SHI Changgen,FENG Shuyu,SHI Hesheng,et al.Trial Study of High Wear-resisting and Acid-resisting Cladding Rolling of 3Cr13Mo-42CrMo in Explosive Welding[J].EXPLOSIVE MATERIALS,2010,39(05):28-30.
点击复制

3Cr13Mo-42CrMo高耐磨耐蚀爆炸焊接复合轧辊试验研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
39
期数:
2010年05
页码:
28-30
栏目:
安全与测试
出版日期:
2010-10-20

文章信息/Info

Title:
Trial Study of High Wear-resisting and Acid-resisting Cladding Rolling of 3Cr13Mo-42CrMo in Explosive Welding
文章编号:
4282
作者:
史长根1; 冯叔瑜2; 史和生2; 冯健2
（1.解放军理工大学工程兵工程学院，江苏南京210007；2.南京润邦金属复合材料有限公司，江苏南京211803）
Author(s):
SHI Changgen1; FENG Shuyu2;  SHI Hesheng2;  FENG Jian2
1.Engineering Institute of Engineer Corps, PLA University of Science & Technology (Jiangsu Nanjing, 210007) 2.Nanjing Runbang Metal Cladding Material Co.,Ltd. (Jiangsu Nanjing, 211803）
关键词:
爆炸焊接; 复合轧辊; 结合界面; 高耐磨
Keywords:
explosive welding;  cladding rolling;  bonding interface;  high wearresisting
分类号:
TG456.6 O389
文献标志码:
A
摘要:
通过爆炸焊接炸药配方优化、锥形布药技术以及爆炸应力退火工艺的试验研究，研制一种在冷热交变、重负荷工况条件下，冶金设备所需的3Cr13Mo-42CrMo高耐磨耐蚀爆炸焊接复合轧辊。爆炸复合轧辊界面和表面性能检测表明：同其它方法相比，爆炸焊接复合轧辊由于外辊是轧制态，其耐磨性能高，而且辊芯和外辊结合强度高，大大提高了轧辊的使用寿命。复合轧辊不仅性能优良、使用寿命高，而且制造成本大大降低。
Abstract:
In explosive welding, a kind of high wear-resisting and acid-resisting cladding rolling is manufactured about 3Cr13Mo-42CrMo. The formula of explosive, the technology of cone explosive and the annealing of explosive stress are studied. The interface and surface properties of cladding rolling of explosive welding are test, and it make clear that there are high wear-resisting and acid-resisting in surface and high strength in interface about the cladding rolling of 3Cr13Mo-42CrMo, significantly improving the usage of cladding rolling. Thus the cladding rolling has the high performance, long usage, and low cost.

参考文献/References:

［1］符寒光,刘金海.国外高速钢复合轧辊研究的进展［J］.铸造，1999（2）:44-47.［2］王素平.离心铸造高速钢复合轧辊生产工艺探讨［J］.轧钢，2008,25(2):65-67.［3］李绍友,高宝存,董双鹏，等.表层堆焊轧辊在带钢生产中的应用［J］.河北冶金，2005（6）：55-56.［4］李建平,徐自立,刘长安，等.新型复合连铸辊套的研制［J］.铸造，2003（10）:783-785.［5］史长根，王耀华，蔡立艮,等.爆炸焊接界面的结合机理［J］.焊接学报,2002 ，23(2):55-58. ［6］史长根，冯健,史和庆，等.高碳高铬莱氏体钢高耐磨复合材料［P］.发明专利: ZL200610039525.1.［7］史长根、李子全,王耀华，等.爆炸焊接2#岩石铵锑炸药不稳定爆轰段界面结合质量研究［J］.爆破器材，2005，34(6)：5-7.［8］郑远谋，黄荣光，陈世红.退火对钛—钢爆炸复合板飞线组织和性能的影响［J］.上海有色金属，1999（1）：35-39.

相似文献/References:

[1]史长根,康丽霞,蒋国良.爆炸焊接两板安全间距分析和试验研究[J].爆破器材,2010,39(03):33.
　SHI Changgen,KANG Lixia,JIANG Guoliang.Analysis and Experimental Study of Safe Space between Two Plates in Explosive Welding[J].EXPLOSIVE MATERIALS,2010,39(05):33.
[2]史长根,洪津,蒋国良,等.爆炸焊接危害机理分析[J].爆破器材,2009,38(03):28.
　SHI Changgen,HONG Jin,JIANG Guoliang,et al.Harm Mechanism Analysis of Explosive Welding[J].EXPLOSIVE MATERIALS,2009,38(05):28.
[3]刘鹏,陆明,史长根,等.爆炸焊接最佳药量窗口及其参数的确定[J].爆破器材,2011,40(03):35.
　LIU Peng,LU Ming,SHI Changgen,et al.Research on Optimum Charge Window in Explosive Welding[J].EXPLOSIVE MATERIALS,2011,40(05):35.
[4]唐文龙①,饶国宁①,周景蓉②,等.SUS304不锈钢/Q345R碳钢爆炸焊接工艺参数研究[J].爆破器材,2012,41(05):29.
　TANG Wenlong,RAO Guoning,ZHOU Jingrong,et al.Study on the Parameters in SUS304 Stainless Steel/Q345R Carbon Steel Explosive Welding Process[J].EXPLOSIVE MATERIALS,2012,41(05):29.
[5]孙光,熊代余,龚兵,等.粉状铵油炸药现场混装车的设计与应用[J].爆破器材,2013,42(05):27.[doi:10.3969/j.issn.1001-8352.2013.05.006]
　SUN Guang,XIONG Daiyu,GONG Bing,et al.Design and Application of Powdery Ammonium Nitrate Fuel Oil Explosive on Site Mixed Loading Truck[J].EXPLOSIVE MATERIALS,2013,42(05):27.[doi:10.3969/j.issn.1001-8352.2013.05.006]
[6]史长根,尤峻.双立式爆炸焊接新方法[J].爆破器材,2008,37(03):28.
　Shi Changgen,You Jun.New Technology of Double Vertical Explosive Welding[J].EXPLOSIVE MATERIALS,2008,37(05):28.
[7]王宇新①,李晓杰①,王小红①,等.基于爆炸焊接技术对磨损失效轧辊的修复研究[J].爆破器材,2018,47(06):8.[doi:10.3969/j.issn.1001-8352.2018.06.002]
　WANG Yuxin,LI Xiaojie,WANG Xiaohong,et al.Study on Repair of Worn Roller Using Explosive Welding Technology[J].EXPLOSIVE MATERIALS,2018,47(05):8.[doi:10.3969/j.issn.1001-8352.2018.06.002]
[8]朱福元①,郭子如②,张仲一②,等.一种平板状爆炸焊接用炸药[J].爆破器材,2021,50(03):40.[doi:10.3969/j.issn.1001-8352.2021.03.008]
　ZHU Fuyuan,GUO Ziru,ZHANG Zhongyi,et al.A Flat Explosive for Explosive Welding[J].EXPLOSIVE MATERIALS,2021,50(05):40.[doi:10.3969/j.issn.1001-8352.2021.03.008]

备注/Memo

备注/Memo:
收稿日期：2010-04-21作者简介：史长根（1971~），男，工学博士，副教授，主要从事爆炸焊接及金属复合材料方面的研究工作。
更新日期/Last Update: 2011-04-11