相似文献/References:
[1]郭涛,高振儒,范磊,等.不同位置条件下减震沟减震效应的数值模拟[J].爆破器材,2010,39(02):7.
GUO Tao,GAO Zhenru,FAN Lei,et al.Numerical Simulation of Damping Effect of Damping Ditch with Different Location[J].EXPLOSIVE MATERIALS,2010,39(05):7.
[2]朱铭颉,顾文彬,唐勇,等.炸高对侵彻效应影响试验和数值模拟研究[J].爆破器材,2010,39(02):31.
ZHU Mingjie,GU Wenbin,TANG Yong,et al.The Experimental & Numerical Simulation of the Standoff Effect to Penetra[J].EXPLOSIVE MATERIALS,2010,39(05):31.
[3]张世林,周春桂,王志军,等.一种新型水射流切割器成型的仿真研究[J].爆破器材,2011,40(02):5.
ZHANG Shilin,ZHOU Chungui,WANG Zhijun.Simulation and Research on Water Jet Formation of a New Type Molding Cutter[J].EXPLOSIVE MATERIALS,2011,40(05):5.
[4]姚志华,王志军,付璐,等.半正方形罩线型切割器的数值模拟研究[J].爆破器材,2011,40(02):11.
YAO Zhihua,WANG Zhijun,FU Lu,et al.Numerical Simulation of Linear Cutter with Semi-square Liner[J].EXPLOSIVE MATERIALS,2011,40(05):11.
[5]刘好全,何洋扬,张洋溢.爆轰波斜入射金属材料的模拟计算[J].爆破器材,2009,38(06):1.
LIU Haoquan,HE Yangyang,ZHANG Yangyi.Simulation on the Oblique Reflection of Detonation Waves at the ExplosiveMetal Interface[J].EXPLOSIVE MATERIALS,2009,38(05):1.
[6]徐全军,白帆,伍睿星.占据式聚能装药射流形成的数值模拟及试验研究[J].爆破器材,2011,40(03):11.
XU Quanjun,BAI Fan,WU Ruixing.Numerical Simulation of Jet Formation by Shaped Charge with the Inhibitor and Experimental Investigation[J].EXPLOSIVE MATERIALS,2011,40(05):11.
[7]成凤生,宋浦,顾晓辉,等.TNT装药爆炸波在刚性平面上方传播反射的数值研究[J].爆破器材,2011,40(04):1.
CHENG Fengsheng,SONG Pu,GU Xiaohui,et al.Numerical Investigation into the Propagation and Reflection of TNT Blast Wave above Rigid Plane[J].EXPLOSIVE MATERIALS,2011,40(05):1.
[8]史长根,尤峻,周祥,等.高压容器试验仓安全评估计算方法研究[J].爆破器材,2011,40(04):32.
SHI Changgen,YOU Jun,ZHOU Xiang,et al.Study on Computational Method of Safe Evaluation for Test House of High Pressure Gases Vessel Explosion Hazards[J].EXPLOSIVE MATERIALS,2011,40(05):32.
[9]贾伟①②,吴国东①,王志军①,等.药型罩结构对环形爆炸成型弹丸形成的影响[J].爆破器材,2011,40(06):8.
JIA Wei,WU Guodong,WANG Zhijun,et al.Influence of Liner Structure on Forming Process of Annular EFP[J].EXPLOSIVE MATERIALS,2011,40(05):8.
[10]周向阳①②.炸药在土壤内部爆炸作用的数值分析[J].爆破器材,2011,40(06):12.
ZHOU Xiangyang.Numerical Analysis on Explosion of Explosive in Soil[J].EXPLOSIVE MATERIALS,2011,40(05):12.
[11]安二峰,杨军,陈鹏万.高锰钢整铸辙叉爆炸硬化实践与研究[J].爆破器材,2009,38(02):25.
AN Erfeng,YANG Jun,CHEN Pengwan.Study on Explosive Hardening of Hadfield Steel Rail Frogs[J].EXPLOSIVE MATERIALS,2009,38(05):25.
[12]臧立伟,尹建平,王志军.轴向预制破片战斗部的设计研究[J].爆破器材,2013,42(02):5.[doi:10.3969/j.issn.1001-8352.2013.02.002]
ZANG liwei,YIN Jianping,WANG Zhijun.Optimizing Design of Axial Prefabricated Fragments[J].EXPLOSIVE MATERIALS,2013,42(05):5.[doi:10.3969/j.issn.1001-8352.2013.02.002]
[13]姚志华,李德战,付庆海,等.偏心亚半球成型装药结构的数值模拟[J].爆破器材,2013,42(02):17.[doi:10.3969/j.issn.1001-8352.2013.02.005]
YAO Zhihua,LI Dezhan,FU Qinghai,et al.Numerical Simulation of Shape Charge with an Eccentric Subhemisphere Liner[J].EXPLOSIVE MATERIALS,2013,42(05):17.[doi:10.3969/j.issn.1001-8352.2013.02.005]
[14]李清,杨阳,杨仁树,等.基于MAT96本构模型的钢筋混凝土结构爆破拆除数值模拟[J].爆破器材,2015,44(01):41.[doi:10.3969/j.issn.1001-8352.2015.01.010]
LI Qing,YANG Yang,YANG Renshu,et al.The Numerical Simulation of Reinforced Concrete Structure Blasting Based on MAT96 Constitutive Model[J].EXPLOSIVE MATERIALS,2015,44(05):41.[doi:10.3969/j.issn.1001-8352.2015.01.010]
[15]王利侠①,周涛①,贺海民①,等.聚能射流引爆屏蔽B炸药的数值模拟及试验[J].爆破器材,2015,44(05):56.[doi:10.3969/j.issn.1001-8352.2015.05.013]
WANG Lixia,ZHOU Tao,HE Haimin,et al.Numerical Simulation and Experimental Investigation of Initiation of Shielded Composition B Impacted by Shaped Charge Jet[J].EXPLOSIVE MATERIALS,2015,44(05):56.[doi:10.3969/j.issn.1001-8352.2015.05.013]
[16]伊建亚①,王志军①,尹建平①,等.复合双药型罩结构冲击ERA及其后效作用研究[J].爆破器材,2017,46(03):45.[doi:10.3969/j.issn.1001-8352.2017.03.009]
YI Jianya,WANG Zhijun,YIN Jianping,et al.Composite Double Liner Impacting ERA and Its Aftermath[J].EXPLOSIVE MATERIALS,2017,46(05):45.[doi:10.3969/j.issn.1001-8352.2017.03.009]