[1]樊龙龙①,马骏②,刘剑②,等.基于芯片式银钯合金膜电桥的换能元的设计与性能研究[J].爆破器材,2025,54(06):8-16.[doi:10.3969/j.issn.1001-8352.2025.06.002]
　FAN Longlong,MA Jun,LIU Jian,et al.Design and Performances of the Transducer Based on Chip-Type Silver-Palladium Alloy Film Bridge[J].EXPLOSIVE MATERIALS,2025,54(06):8-16.[doi:10.3969/j.issn.1001-8352.2025.06.002]
点击复制

基于芯片式银钯合金膜电桥的换能元的设计与性能研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
54
期数:
2025年06
页码:
8-16
栏目:
基础理论
出版日期:
2025-12-09

文章信息/Info

Title:
Design and Performances of the Transducer Based on Chip-Type Silver-Palladium Alloy Film Bridge
文章编号:
6087
作者:
樊龙龙①; 马骏②; 刘剑②; 艾沛延②; 杨康②; 郭凯②; 吴琴钟②; 韩克华②
① 海军装备部(陕西西安，710043)
② 陕西应用物理化学研究所(陕西西安，710061）
Author(s):
FAN Longlong①;  MA Jun②;  LIU Jian②;  AI Peiyan②;  YANG Kang②;  GUO Kai②;  WU Qinzhong②;  HAN Kehua②
① Navy Equipment Department of PLA (Shaanxi Xi’an, 710043)
② Shaanxi Applied Physicsand Chemistry Research Institute (Shaanxi Xi’an, 710061)
关键词:
火工品; 换能元芯片; 激光调阻; 银钯合金膜
分类号:
TJ55
DOI:
10.3969/j.issn.1001-8352.2025.06.002
文献标志码:
A
摘要:
为了使火工品换能元电桥芯片化，提升火工品换能元电桥的加工精度及效能，采用银钯合金膜制备芯片式火工品换能元电桥,并开展了性能研究。结果表明：通过激光调阻工艺制备的银钯合金膜换能元电桥芯片的电阻精度得到提高，电阻为1 Ω时，精度可达±1%；基于银钯合金膜芯片的换能元的最小爆发工作电压为16 V(33 μF)，最小爆发电流为2.9 A(50 ms)，最大不熔断电流为1.3 A(5 min)，最高温度为215.13 ℃；基于银钯合金膜电桥芯片换能元的电点火器安全电流在1.3~1.6 A之间，满足钝感火工品1 A、 1 W、 5 min的要求，并且能可靠点燃40 mg斯帝芬酸铅与180 mg 的B/KNO3的装药序列。为高效能、高精度电火工品换能元电桥的标准化设计及应用提供技术参考。

参考文献/References:

［1］王广海, 李国新, 阿苏娜. 薄膜桥火工品的制备与性能研究［J］. 含能材料, 2008, 16(5): 543-546.

WANG G H, LI G X, A S N. Preparation and properties of thin film bridge EED ［J］.Chinese Journal of Energetic Materials, 2008, 16(5): 543-546.
［2］齐雅松, 吴瑞德, 刘红娥, 等. Ni-Cr异形电桥的换能规律研究［J］. 火工品, 2022(2): 1-5.
QI Y S, WU R D, LIU H E, et al. Study on energy conversion property of Ni-Cr special shaped electric bridge［J］.Initiators & Pyrotechnics, 2022(2): 1-5.
［3］齐雅松, 吴瑞德, 刘红娥, 等. 异形电桥发火单元温升特性的数值研究［J］. 火工品, 2021(5): 1-5.
QI Y S, WU R D, LIU H E, et al. Numerical study on the temperature rise characteristies of the firing unit with special shaped electric bridge ［J］.Initiators & Pyrotechnics, 2021(5): 1-5.
［4］王科伟, 段卜仁, 姜晓斌, 等. Ni-Cr桥膜换能元直流激励下作用规律研究［J］. 火工品, 2023(6): 21-26.
WANG K W, DUAN B R, JIANG X B, et al. Study on the behavior of NiCr bridge film energy conversion element under DC excitation ［J］.Initiators & Pyrotechnics, 2023(6): 21-26.
［5］易镇鑫, 李林, 魏梦焱, 等. 银膜换能元的喷墨打印及其性能表征［J］.含能材料, 2023, 31(3): 215-221.
YI Z X, LI L, WEI M Y, et al. Preparation and properties of inkjet printing silver film bridge ［J］.Chinese Journal of Energetic Materials, 2023, 31(3): 215-221.
［6］FARAHANI R D, DUBE M, THERRIAULT D. Three-dimensional printing of multifunctional nanocomposites: Manufacturing techniques and applications ［J］. Advanced Materials, 2016, 28(28): 5794-5821.
［7］李春燕, 李晨阳, 李敏杰, 等. 喷墨打印墨滴成形机理及其在含能领域应用进展［J］.含能材料, 2022, 30(9): 937-951.
LI C Y, LI C Y, LI M J, et al. Review on inkjet printing for ink droplet forming mechanism and its application in energetic materials ［J］.Chinese Journal of Energetic Materials, 2022, 30(9): 937-951.
［8］艾沛延, 赵婉君, 吴琴钟, 等. 贴膜式Ni-Cr换能元设计及性能研究［J］.火工品, 2024(5): 46-53.
AI P Y, ZHAO W J, WU Q Z, et al. Design and performance study of film-applied Ni-Cr transducer elements ［J］.Initiators & Pyrotechnics, 2024(5): 46-53.
［9］褚恩义, 张方, 张蕊, 等. 第四代火工品部分概念初步探讨［J］. 火工品, 2018(1): 1-5.
CHU E Y, ZHANG F, ZHANG R, et al. Preliminary discussion of new concepts of the 4th generation pyrotechnics ［J］. Initiators & Pyrotechnics, 2018(1): 1-5.
［10］孙浩峰. 钯合金膜的制备及膜反应器催化性能研究［D］. 淄博: 山东理工大学, 2023.
SUN H F. Preparation of palladium alloy membrane and catalytic peformance of membrane reactor ［D］. Zibo: Shandong University of Technology, 2023.?
［11］中国兵器工业集团有限公司. 钝感电起爆器通用规范: GJB 344A—2020 ［S］.北京: 国家军用标准出版发行部, 2020.
China North Industries Group Corporation Limited. General Specification for insensitive electric-initiators: GJB 344A—2020 ［S］. Beijing: National Military Standard Publishing Department, 2020.
［12］石蓝, 杨安民, 张迎春, 等. 电火工品桥带温升数学模型及可靠性设计应用［J］.火工品, 2016(6): 24-27.
SHI L, YANG A M, ZHANG Y C, et al. Temperature rise mathematical model of bridge strip electric initiator and its reliability design ［J］.Initiators & Pyrotechnics, 2016(6): 24-27.
［13］中国兵器工业集团有限公司. 火工品试验方法-第16部分：点火压力-时间曲线测定: GJB 736.16A—2019 ［S］. 北京: 国家军用标准出版发行部, 2019.
China North Industries Group Corporation Limited. Test method for initiating explosive devices Part 16: Measurement of firing pressure-time curve: GJB 736.16A—2019 ［S］. Beijing: National Military Standard Publishing Department, 2019.

相似文献/References:

[1]张文超,张伟,徐振相,等.半导体桥的研究进展与发展趋势[J].爆破器材,2009,38(02):21.
　ZHANG Wenchao,ZHANG Wei,XU Zhenxiang,et al.Progress and Development on Semiconductor Bridge Initiator[J].EXPLOSIVE MATERIALS,2009,38(06):21.
[2]赵团,姚洪志,纪向飞,等.火工品高频段射频阻抗测试技术[J].爆破器材,2016,45(04):61.[doi:10.3969/j.issn.1001-8352.2016.04.013]
　ZHAO Tuan,YAO Hongzhi,JI Xiangfei,et al.Test Technique of RF Impedance of EED in High Frequency[J].EXPLOSIVE MATERIALS,2016,45(06):61.[doi:10.3969/j.issn.1001-8352.2016.04.013]
[3]董军①②,杜茂华①,王晓峰②,等.3D打印技术在火工品和炸药中的应用研究[J].爆破器材,2021,50(04):1.[doi:10.3969/j.issn.1001-8352.2021.04.001]
　DONG Jun,DU Maohua,WANG Xiaofeng,et al.Application of 3D Printing Technology in Pyrotechnics and Explosives[J].EXPLOSIVE MATERIALS,2021,50(06):1.[doi:10.3969/j.issn.1001-8352.2021.04.001]
[4]丁跃伟,赵洪海,程涛,等.引爆装置长期储存失效研究[J].爆破器材,2023,52(01):30.[doi:10.3969/j.issn.1001-8352.2023.01.005]
　DING Yuewei,ZHAO Honghai,CHENG Tao,et al.Study on Failure of an Initiating Device in Long-Time Storage[J].EXPLOSIVE MATERIALS,2023,52(06):30.[doi:10.3969/j.issn.1001-8352.2023.01.005]
[5]袁玉红①②,张胜③,韩保良④,等.基于PSpice软件的半导体桥换能元电爆特性的模拟仿真[J].爆破器材,2023,52(06):22.[doi:10.3969/j.issn.1001-8352.2023.06.004]
　YUAN Yuhong,ZHANG Sheng,HAN Baoliang,et al.Simulation of the Electro-Explosive Characteristics of Semiconductor Bridge Exchange Elements Based on PSpice Software[J].EXPLOSIVE MATERIALS,2023,52(06):22.[doi:10.3969/j.issn.1001-8352.2023.06.004]
[6]袁玉红①②,李军福③,周彬①,等.半导体桥火工品的防静电与防射频设计[J].爆破器材,2024,53(01):30.[doi:10.3969/j.issn.1001-8352.2024.01.005]
　YUAN Yuhong,LI Junfu,ZHOU Bin,et al.Anti-Static and Anti-RF Design of the Semiconductor Bridge Initiator[J].EXPLOSIVE MATERIALS,2024,53(06):30.[doi:10.3969/j.issn.1001-8352.2024.01.005]

备注/Memo

备注/Memo:
收稿日期：2025-10-16
基金项目：国家技术基础项目（JZX7J202311BZ003000）
第一作者：樊龙龙（1984—），男，工程师，主要从事火工品质量监督工作。E-mail: 305405803@qq.com
通信作者：艾沛延（2000—），女，博士研究生，主要从事先进火工品技术研究。E-mail: 954730886@qq.com
更新日期/Last Update: 2025-12-08