[1]张雪丽①,沈永福①,张丁雄①,等.炸高对聚能射流源侵彻性能影响的量化研究[J].爆破器材,2026,55(01):32-37，44.[doi:10.3969/j.issn.1001-8352.2026.01.005]
　ZHANG Xueli,SHEN Yongfu,ZHANG Dingxiong,et al.Quantitative Study on the Influence of Explosion Height on Penetration Performances of the Shaped Charge Jet Source[J].EXPLOSIVE MATERIALS,2026,55(01):32-37，44.[doi:10.3969/j.issn.1001-8352.2026.01.005]
点击复制

炸高对聚能射流源侵彻性能影响的量化研究()

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
55
期数:
2026年01
页码:
32-37，44
栏目:
爆炸材料
出版日期:
2026-01-19

文章信息/Info

Title:
Quantitative Study on the Influence of Explosion Height on Penetration Performances of the Shaped Charge Jet Source
文章编号:
6041
作者:
张雪丽①; 沈永福①; 张丁雄①; 姜楠②; 丁建②
①中国人民解放军92228部队（北京，100072）
②南京君缘科爆工程技术有限公司（江苏南京，311135）
Author(s):
ZHANG Xueli①;  SHEN Yongfu①;  ZHANG Dingxiong①;  JIANG Nan②;  DING Jian②
① Unit 92228 of PLA (Beijing, 100072)
② Nanjing Junyuan Scientific Blasting Engineering Technology Co., Ltd. (Jiangsu Nanjing, 311135)
关键词:
聚能射流源; 侵彻性能; 仿真; 试验; 量化
分类号:
TJ410.6
DOI:
10.3969/j.issn.1001-8352.2026.01.005
文献标志码:
A
摘要:
为评估炸高对聚能射流源侵彻性能的影响，构建82 mm口径聚能射流源模型，在110~450 mm多种炸高下开展射流源侵彻性能仿真研究，并针对主要仿真工况，开展验证试验。基于试验和仿真获得的射流形态、射流速度、射流直径、侵彻深度和侵彻孔径等侵彻性能数据，开展炸高对聚能射流源侵彻性能影响的分析和量化研究。结果表明：仿真和试验结果一致性好，仿真方法可靠性高；射流头部速度与炸高呈负指数关系；侵彻深度与炸高之间存在非线性关系；最佳炸高为256 mm。量化研究结果可为射流安全性设计和试验考核提供参考。

参考文献/References:

［1］刘健, 李斌, 解立峰, 等. HMX基含铝炸药低易损性能测试研究［J］. 中国安全科学学报, 2017, 27（8）: 56-61.

LIU J, LI B, XIE L F, et al. Text based study on low vulnerability of a HMX-based aluminized explosive ［J］. China Safety Science Journal, 2017, 27（8）: 56-61.
［2］张光全, 刘晓波, 黄明. 钝感弹药技术凸显压制工艺的重要性［J］．含能材料, 2016, 24(4): 315-317．
［3］殷瑱, 闻泉, 王雨时, 等. 北约不敏感弹药标准试验方法［J］．兵器装备工程学报, 2016, 37(10): 1-7．
YIN Z, WEN Q, WANG Y S, et al. Standard experiment method for insensitive munitions in NATO ［J］. Journal of Ordnance Equipment Engineering, 2016, 37(10): 1-7．
［4］唐桂芳, 王晓峰, 李巍. 浇注PBX的低易损性能研究［J］. 含能材料, 2003, 11(3): 163-165.
TANG G F, WANG X F, LI W. Study on low vulnerability of cast PBX ［J］. Chinese Journal of Energetic Materials, 2003, 11(3): 163-165.
［5］席鹏, 南海, 倪冰, 等．B炸药在弹丸侵彻作用下的易损性［J］．含能材料, 2014, 22(1): 62-65．
XI P, NAN H, NI B, et al. Vulnerability of composition B by bullet penetration ［J］. Chinese Journal of Energetic Materials, 2014, 22(1): 62-65．
［6］Hazard assessment tests for non-nuclear munitions: MIL-STD-2105D ［S］．Department of Defense, US, 2011．
［7］NATO. Policy for introduction and assessment of insensitive munition (IM): STANAG 4439: 2010［S］．NATO, 2010．
［8］NATO. Guidance on the assessment and development of insensitive munitions (IM): AOP-39 (Edition 3)［S］．NATO, 2010．
［9］曹军, 郭颜红. 固体火箭发动机聚能射流低易损试验研究［J］. 航空兵器, 2019, 26（3）: 72-77.
CAO J, GUO Y H. Experimental research on low vulnerability of solid rocket motor in relation to shaped charge jet ［J］. Aero Weaponry, 2019, 26（3）: 72-77.
［10］冯可华, 杨莹, 陈勇. 射流源破甲稳定性研究［J］. 兵工自动化, 2022, 41（9）: 87-92.
FENG K H, YANG Y, CHEN Y. Study on penetrating stability of shaped charge jet ［J］. Ordance Industry Automation, 2022, 41（9）: 87-92.
［11］赵玉清, 靳朝阳, 李建强, 等. 弹药低易损试验研究及射流源设计［J］. 兵器装备工程学报, 2019, 40（9）: 25-30.
ZHAO Y Q, JIN C Y, LI J Q, et al. Hazard assessment tests for munitions and design of shaped charge jet source ［J］. Journal of Ordnance Equipment Engineering, 2019, 40（9）: 25-30.
［12］宋乙丹, 陈科全, 路中华, 等. 聚能射流冲击起爆屏蔽压装PBX炸药的试验研究［J］. 火炸药学报, 2019, 40（1）: 69-72, 78.
SONG Y D, CHE K Q, LU Z H, et al. Experimental research of the impact initiation of shelled pressed PBX explosives by shaped charge jet ［J］. Chinese Journal of Explosives & Propellants, 2019, 40（1）: 69-72, 78.
［13］王艺臻, 尹建平, 张雪朋, 等.聚能射流动态侵彻威力预测模型［J］. 兵工学报, 2025, 46(6): 283-290.
WANG Y Z, YIN J P, ZHANG X P, et al. A prediciton model for dynamic penetration of shaped charge jet ［J］. Acta Armamentarii, 2025, 46(6): 283-290.
［14］PEUGEOT F, QUIDOT M, PRESLES H N. An analytical extension of the critical energy criterion used to predict bare explosive response to jet attack［J］. Propellants, Explosives, Pyrotechnics, 1998, 23(3): 117-122.
［15］ARNOLD W, ROTTENKOLBER E. High explosive initiation behavior by shaped charge jet impacts ［J］. Procedia Engineering, 2013, 58: 184-193.
［16］宣世峰, 尚伟, 韩伟, 等. 截顶式聚能装药战斗部射流成形规律研究［J］. 兵器装备工程学报, 2022, 43(1): 73-78.
XUAN S F, SHANG W, HAN W, et al. Study on jet forming law of truncation shaped charge warhead［J］. Journal of Ordance Equipment Engineering, 2022, 43(1): 73-78.
［17］王静, 王成, 宁建国.聚能射流侵彻的理论模型与孔径计算［J］. 工程力学, 2009, 26（4）: 21-26.
WANG J, WANG C, NING J G. Theoretical model for shaped charge jets penetration and cavity radius calculation ［J］. Energeering Mechanics, 2009, 26（4）: 21-26.

相似文献/References:

[1]张利①,姚黄伟②.前舱干扰下锥弧药型罩射流成型及侵彻性能研究[J].爆破器材,2022,51(01):35.[doi:10.3969/j.issn.1001-8352.2022.01.007]
　ZHANG Li,YAO Huangwei.Jet Forming and Penetration Performance of Conical Arc Liner under the Interference of Forebay[J].EXPLOSIVE MATERIALS,2022,51(01):35.[doi:10.3969/j.issn.1001-8352.2022.01.007]

备注/Memo

备注/Memo:
收稿日期：2025-05-15
第一作者：张雪丽（1988—），女，博士，工程师，主要从事弹药安全的研究。E-mail: 532191322@qq.com
通信作者：沈永福（1974—），男，硕士，高级工程师，主要从事弹药安全的研究。E-mail: Shenyf74@sina.com
更新日期/Last Update: 2026-01-19