[1]牛义杰①②,余洋②,刘永付②,等.厚壁战斗部聚能射流冲击安全性的实验设计研究[J].爆破器材,2026,55(01):38-44.[doi:10.3969/j.issn.1001-8352.2026.01.006]
　NIU Yijie,YU Yang,LIU Yongfu,et al.Experimental Design and Study on the Safety of Shaped Charge Jet Impact of Thick Walled Warheads[J].EXPLOSIVE MATERIALS,2026,55(01):38-44.[doi:10.3969/j.issn.1001-8352.2026.01.006]
点击复制

厚壁战斗部聚能射流冲击安全性的实验设计研究()

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
55
期数:
2026年01
页码:
38-44
栏目:
爆炸材料
出版日期:
2026-01-19

文章信息/Info

Title:
Experimental Design and Study on the Safety of Shaped Charge Jet Impact of Thick Walled Warheads
文章编号:
6032
作者:
牛义杰①②; 余洋②; 刘永付②; 李晓辉②; 赵友②; 陈刚②
①国防科技大学系统工程学院（湖南长沙，410073）
②中国人民解放军63867部队（吉林白城，137001）
Author(s):
NIU Yijie①②;  YU Yang②;  LIU Yongfu②;  LI Xiaohui②;  ZHAO You②;  CHEN Gang②
① College of Systems Engineering, National University of Defense Technology (Hu’nan Changsha, 410073)
② Unit 63867 of PLA (Jilin Baicheng, 137001)
关键词:
射流冲击; 反应等级; 厚壁战斗部; 弹药安全性; 响应元
分类号:
TJ410
DOI:
10.3969/j.issn.1001-8352.2026.01.006
文献标志码:
A
摘要:
为探究厚壁战斗部在聚能射流冲击下的响应特性及安全性评定方法，采用直径为46、125 mm 2种口径的射流冲击装置对战斗部实施冲击实验，将10类响应元进行不同的权重赋值，得到最佳评估符合度，从而评判战斗部最可能发生的反应等级。结果表明：2组实验中，在5.0 m处测量得到的反射冲击波的平均峰值超压分别为368.3、285.3 kPa；在距离爆心8.5 m处的破片速度为1 242.9、 1 030.8 m/s，最佳评估符合度对应的反应等级分别为爆轰和爆炸。相较于美军及北约弹药安全性评判标准，通过典型毁伤元威力数据对比和10类响应元不同权重赋值评判，可更加综合、科学地判定战斗部的响应等级。

参考文献/References:

［1］Hazard assessment tests for nonnuclear munitions: MILSTD2105D ［S］. Department of Defense, US, 2011.

［2］NATO. Policy for introduction and assessment of insensitive munitions (IM): STANAG 4439: 2010 ［S］. NATO, 2010.
［3］HELD M. Initiation criteria of high explosives at different projectile or jet densities ［J］. Propellants, Explosives, Pyrotechnics, 1996, 21(5): 235-237.
［4］HELD M. Shaped charge jet initiation tests with covered high explsive charges with air gaps ［J］. Propellants, Explosives, Pyrotechnics, 2011, 26(1): 38-42.
［5］ARNOLD W, HARTMANN T, ROTTENKOLBER E. Filling the gap between hypervelocity and low velocity impacts ［J］. International Journal of Impact Engineering, 2020, 139: 103531．
［6］王利侠, 谷鸿平, 丁刚, 等. 聚能射流对带壳浇注PBX装药的撞击响应［J］. 含能材料, 2015, 23(11): 1067-1072.
WANG L X, GU H P, DING G, et al．Reaction characteristics for shelled cast-cured PBX explosive impacted by shaped charge jet ［J］. Chinese Journal of Energetic Materials, 2015, 23(11): 1067-1072.
［7］宋乙丹, 陈科全, 路中华, 等. 聚能射流冲击起爆屏蔽压装PBX炸药的试验研究［J］. 火炸药学报, 2019, 42(1): 69-72, 78.
SONG Y D, CHEN K Q, LU Z H, et al.Experimental research of the impact initiation of shelled pressed PBX explosives by shaped charge jet ［J］．Chinese Journal of Explosives & Propellants, 2019, 42(1): 69-72, 78．
［8］陈思敏, 黄正祥, 贾鑫, 等. 射流冲击盖板覆盖下有限厚炸药的仿真和试验研究［J］. 含能材料, 2021, 29(2): 114-123.
CHEN S M, HUANG Z X, JIA X, et al. Simulation and experimental study of jet impact on covered finite-thickness explosive ［J］. Chinese Journal of Energetic Materials, 2021, 29(2): 114-123.
［9］赵聘, 陈朗, 李金河, 等. 聚能射流侵彻隔板形成的前驱冲击波起爆不同温度炸药特性［J］. 兵工学报, 2021, 42(1): 45-55.
ZHAO P, CHEN L, LI J H, et al．The characteristics of explosives initiated by precursor shock waves in shaped charge jet penetrating a bulkhead at different temperatures ［J］. Acta Armamentarii, 2021, 42(1): 45-55.
［10］韩冰, 魏伦, 于慧芳, 等. CD-3发射装药低易损性能试验研究［J］. 爆破器材, 2022, 51(2): 26-30.
HAN B, WEI L, YU H F, et al. Experimental study on low vulnerability of CD-3 propellant charge ［J］. Explosive Materials, 2022, 51(2): 26-30.
［11］宋永彬, 陈思敏, 贾鑫, 等. 装药结构对引爆运动厚壳装药影响的仿真研究［J］. 兵器装备工程学报, 2022, 43(7): 254-259.
SONG Y B, CHEN S M, JIA X, et al. Simulation study on effect of shaped charge structure on initiation of moving thick shell charge ［J］. Journal of Ordnance Equipment Engineering, 2022, 43(7): 254-259.
［12］王鲁庆, 程扬帆, 徐庆涛. 聚能射流在销毁废旧炮弹中的应用［J］. 工程爆破, 2025, 31(2): 106-110.
WANG L Q, CHENG Y F, XU Q T, et al. Application study of destroying discard old bomb by shaped jet ［J］. Engineering Blasting, 2025, 31(2): 106-110.
［13］邢旭阳, 肖有才, 余万千, 等. 聚能射流作用下带壳PBX装药响应特性实验与仿真模拟［J］. 火炸药学报, 2025, 48(2): 177-185.
XING X Y, XIAO Y C, YU W Q, et al. Experimental and numerical study on the response characteristics of shell PBX charges under jetting action ［J］. Chinese Journal of Explosives & Propellants, 2025, 48(2): 177-185.
［14］胡中伟, 毛益明, 丁文, 等. 聚能射流作用于带壳B炸药非爆轰解体的研究［J］. 爆破器材, 2025, 54(4): 1-8.
HU Z W, MAO Y M, DING W, et al. Study on disintegration without detonation of shelled Composition B penetrated by shaped charge jet ［J］. Explosive Materials, 2025, 54(4): 1-8.
［15］隋树元, 王树山. 终点效应学［M］. 北京: 国防工业出版社, 2000: 279-293.
SUI S Y, WANG S S. Terminal effects ［M］. Beijing: National Defense Industry Press, 2000: 279-293.
［16］刘永付, 陈荣, 余洋, 等. 一种基于试验统计的弹药低易损性评估方法［J］. 兵器装备工程学报, 2022, 43(8): 20-25.
LIU Y F, CHEN R, YU Y, et al. A low vulnerability assessment method of ammunition based on test statistics ［J］. Journal of Ordnance Equipment Engineering, 2022, 43(8): 20-25.

备注/Memo

备注/Memo:
收稿日期：2025-04-08
第一作者：牛义杰（1988—），男，工程师，主要从事毁伤效能评估的研究。E-mail: niuyijie007@163.com
通信作者：余洋（1992—），男，硕士，工程师，主要从事毁伤效能评估的研究。E-mail: 962823438@qq.com
更新日期/Last Update: 2026-01-19