[1]孙鹏瞻①,杨敏②,尢淇①,等.Pickering乳液自组装CL-20/n-Al/F2605复合空心微球的制备与性能[J].爆破器材,2024,53(04):9-16.[doi:10.3969/j.issn.1001-8352.2024.04.002]
　SUN Pengzhan,YANG Min,YOU Qi,et al.Preparation and Characterization of CL-20/n-Al/F2605 Composite Hollow Microspheres Self-Assembled by Pickering Emulsion[J].EXPLOSIVE MATERIALS,2024,53(04):9-16.[doi:10.3969/j.issn.1001-8352.2024.04.002]
点击复制

Pickering乳液自组装CL-20/n-Al/F2605复合空心微球的制备与性能()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
53
期数:
2024年04
页码:
9-16
栏目:
基础理论
出版日期:
2024-07-18

文章信息/Info

Title:
Preparation and Characterization of CL-20/n-Al/F2605 Composite Hollow Microspheres Self-Assembled by Pickering Emulsion
文章编号:
5907
作者:
孙鹏瞻①; 杨敏②; 尢淇①; 高登钊②; 李聪颖③; 张行泉②; 郭长平②
① 西北工业大学伦敦玛丽女王大学工程学院(陕西西安,710129)
② 西南科技大学四川省新型含能材料军民融合创新中心(四川绵阳,621010)
③ 山西北化关铝化工有限公司（山西永济，044500）
Author(s):
SUN Pengzhan①;  YANG Min②;  YOU Qi①;  GAO Dengzhao②;  LI Congying③;  ZHANG Xingquan②;  GUO Changping②
① Queen Mary University of London Engineering School, Northwestern Polytechnical University (Shaanxi Xi’an, 710129)
② Sichuan Co-Innovation Center for New Energetic Materials, Southwest University of Science and Technology (Sichuan Mianyang, 621010)
③ Shanxi Beihua Guanlü Chemical Industry Co., Ltd. (Shanxi Yongji, 044500)
关键词:
六硝基六氮杂异伍兹烷（CL-20）; 纳米铝粉(n-Al); 微球; Pickering乳液
Keywords:
hexanitrohexaazaisowurtzitane（CL-20）;  nano-aluminum powder(n-Al);  microsphere;  Pickering emulsion
分类号:
TJ55；O76
DOI:
10.3969/j.issn.1001-8352.2024.04.002
文献标志码:
A
摘要:
高能量、高爆热的六硝基六氮杂异伍兹烷（CL-20）/Al复合物由于自身的高感度而限制了在炸药领域的广泛应用。为制备高能量和高安全性的CL-20/Al含能复合材料，采用Pickering乳液法制备了空心球形CL-20/n-Al/F2605（氟橡胶）复合物，并对Pickering乳液稳定性、复合物表面结构、热分解、燃烧及安全性能进行了分析。结果显示：当2 mL 乙酸乙酯中溶解的CL-20固体质量为0.10~0.14 g、油水质量比在1∶5~1∶7之间、超声时间小于30 min、静置时间小于120 min时，形成的乳液稳定性好。该复合物表面结构粗糙，中位径d50为73.17 μm，各组分复合均匀。复合物的热分解峰温和活化能分别为236.7 ℃、164.6 kJ/mol，n-Al和F2605降低了CL-20分解过程中21.2 %的活化能。复合物平均线性燃速为7.14 cm/s；特性落高H50为39.5 cm，和原料CL-20相比提升了26.5 cm，安全性能得到提高。
Abstract:
High-energy and high-heat of detonation hexanitrohexaazaisowurtzitane (CL-20)/Al compo-site has limited its wide application in the field of explosives due to its high sensitivity. In order to prepare CL-20/Al energetic composites with high energy and safety performance, hollow spherical CL-20/n-Al/F2605 composites were prepared by Pickering emulsion method. Stability of Pickering emulsion, surface structure, thermal decomposition, combustion and safety performances of the composites were analyzed. The results show that the stability of the emulsion is good when the solid mass of CL-20 dissolved in 2 mL of ethyl acetate is 0.10~0.14 g, the mass ratio of oil to water is between 1∶5 and 1∶7, the ultrasonic time is less than 30 min, and the standing time is less than 120 min. The surface structure of the composite is rough, d50?is about 73.17 μm, and the components are uniformly compounded. Thermal decomposition peak temperature and activation energy of the composites are 236.7 ℃ and 164.6 kJ/mol, respectively. Activation energy of CL-20 in decomposition process is reduced by 21.2 % by n-Al and F2605. Average linear burning rate of the composites is 7.14 cm/s. Its characteristic drop height H50 is 39.5 cm, which is 26.5 cm higher than that of raw material CL-20, and the safety performance is improved.

相似文献/References:

[1]石磊①,孙志杨②,杨超飞①,等.磺酸类催化剂在合成CL-20硝化反应中的应用[J].爆破器材,2018,47(05):16.[doi:10.3969/j.issn.1001-8352.2018.05.003]
　SHI Lei,SUN Zhiyang,YANG Chaofei,et al.Application of Sulfonic Acid Catalysts in Nitration in Synthesis of CL-20[J].EXPLOSIVE MATERIALS,2018,47(04):16.[doi:10.3969/j.issn.1001-8352.2018.05.003]

备注/Memo

备注/Memo:
收稿日期：2023-12-08
第一作者：孙鹏瞻（2003—），男，本科生，主要从事含能材料改性的研究。E-mail：1198904256@qq.com
通信作者：郭长平（1982—），男，副教授，硕导，主要从事含能材料改性的研究。E-mail：guochangping001@163.com
更新日期/Last Update: 2024-07-16