[1]何晓晖①,李峰②,沙毅刚①,等.链枷式排爆装置抗爆性能的仿真与试验研究[J].爆破器材,2021,50(02):34-40.[doi:10.3969/j.issn.1001-8352.2021.02.007]
　HE Xiaohui,LI Feng,SHA Yigang,et al.Simulation and Experimental Research on Anti-Explosion Performance of a Chain Flail Explosive Disposal Device[J].EXPLOSIVE MATERIALS,2021,50(02):34-40.[doi:10.3969/j.issn.1001-8352.2021.02.007]
点击复制

链枷式排爆装置抗爆性能的仿真与试验研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
50
期数:
2021年02
页码:
34-40
栏目:
爆炸材料
出版日期:
2021-04-09

文章信息/Info

Title:
Simulation and Experimental Research on Anti-Explosion Performance of a Chain Flail Explosive Disposal Device
文章编号:
5531
作者:
何晓晖①; 李峰②; 沙毅刚①; 朱晓基①
①陆军工程大学野战工程学院（江苏南京,210007）
②陆军试验训练基地（北京,100093）
Author(s):
HE Xiaohui①;  LI Feng②;  SHA Yigang①;  ZHU Xiaoji①
① College of Field Engineering, PLA Army Engineering University (Jiangsu Nanjing, 210007)
② Army Test Training Base (Beijing, 100093)
关键词:
排爆装置; 抗爆性能; 数值仿真; 抗爆试验
Keywords:
explosive disposal device;  anti-explosion performance;  numerical simulation;  anti-explosion test
分类号:
O383；TJ51
DOI:
10.3969/j.issn.1001-8352.2021.02.007
文献标志码:
A
摘要:
为了探究链枷式排爆装置的抗爆性能是否满足作业需求，以ANSYS软件为技术平台，建立了该排爆装置抗爆性能的仿真计算模型。依托该模型，对不同TNT当量、不同爆炸位置等多种工况下排爆装置的抗爆性能进行了分析，得到其结构变形量和速度特性。同时，搭建了链枷式排爆装置的抗爆性能试验台架，通过台架试验验证了仿真模型的可信性，为排爆装置抗爆性能分析评价与结构优化设计提供参考。
Abstract:
In order to explore whether the anti-explosion performance of a chain flail explosive disposal (EOD) device? meets the operation requirements, a simulation calculation model of the antiexplosion performance of the chain flail explosive disposal device was established based on ANSYS software. Based on the model, the anti-explosion performance of the EOD device under different equivalent TNT and different explosion positions was analyzed, and the structural deformation and velocity characteristics were obtained. At the same time, a test bench for the anti-explosion performance of the EOD device was built, and the credibility of the simulation model was verified through the bench test, which provides a reference for the analysis and evaluation of the anti-explosion performance and the structural optimization of the EOD device.

参考文献/References:

［1］王军.防地雷反伏击车设计浅谈［J］.国防科技,2020,41(2):101-106.
WANG J. Design of a mine resistant ambush-protected vehicle ［J］. National Defense Technology, 2020, 41(2): 101-106.
［2］王皓.浅述排爆工作基本原则及高铁防爆对策［J］. 法制博览, 2019(5):257.
［3］CHEN L, SUN W W, CHEN B C, et al. A comparative study on blast-resistant performance of steel and PVA fiber-reinforced concrete: experimental and numerical analyses［J］. Crystals, 2020, 10(8): 707.
［4］沈臻懿.现代排爆装备［J］.检察风云,2015(18):40-42.SHEN Z Y. Modern demining equipments ［J］. Procuratorial View, 2015(18): 40-42.
［5］裴红波,聂建新,王正宏. 一种利用聚能效应的排爆装置研究［C］//重庆市人民政府，中国工程物理研究院.全国危险物质与安全应急技术研讨会论文集. 重庆,2011:986-988.
PEI H B, NIE J X, WANG Z H. Study on a special shaped charge device for the disruption of explosive object ［C］//Chongqing Municipal Government, China Academy of Engineering Physics. Proceedings of the National Conference on Hazardous Substances and Safety Emergency Technology. Chongqing, 2011: 986-988.
［6］沈文妮,黄正祥,祖旭东,等.接触爆炸下黏土砖砌体墙的抗爆性能［J］.爆破器材, 2020, 49(4): 45-51.
SHEN W N, HUANG Z X, ZU X D, et al. Anti-explosion performance of clay brickmasonry wall under contact blast load［J］. Explosive Materials, 2020,49(4): 45-51.
［7］赵红玲,孙成城,谢冰,等.喷涂聚脲加固框架结构墙体抗爆性能试验研究［J］.福建建设科技,2020(3):28-32.
ZHAO H L, SUN C C, XIE B, et al. The experimental study of the anti-explosion performance of frame wall using sprayed polyurea coating［J］. Fujian Construction Science and Technology,2020(3):28-32.
［8］杨坦,蒋亚龙,蔡周全,等.基于MSC.PATRAN的救生舱抗爆性能分析［J］.长江大学学报(自然科学版),2020,17(3):95-101.
［9］罗立胜,陈万祥,郭志昆,等.考虑面力作用的HFR-LWC梁抗爆试验研究［J］.工程力学,2020,37(5):237-248.LUO L S, CHEN W X, GUO Z K, et al. Experimental study on blast-resistances of HFRLWC beam with membrane effect［J］. Engineering Mechanics,2020,37(5):237-248.
［10］张嵩,巴振宁,赵靖轩.大直径盾构隧道复合泡沫铝保护层抗爆性能研究［J］.市政技术,2020,38(3):149-152.
ZHANG S, BA Z N, ZHAO J X. Study on antiblast performance of composite foam aluminum protective layer for large diameter shield tunnel［J］. Municipal Engineering Technology,2020,38(3):149-152.
［11］赵均海,董婧,张冬芳,等.FRP钢管混凝土柱抗爆性能数值模拟［J］.建筑科学与工程学报, 2020,37(2):35-43.
ZHAO J H, DONG J, ZHANG D F, et al. Numerical simulation of blast resistance of concrete-filled steel tubecolumns confined with FRP［J］. Journal of Architecture and Civil Engineering,2020,37(2):35-43.
［12］KUMAR T, MOHSIN R, MAJID Z A. et al. Experimental study of the antiknock efficiency of high-octane fuels in spark ignited aircraft engine using response surface methodology［J］. Applied Energy,2020,259: 114150.
［13］刘三丰,金丰年,周寅智,等.GFRP筋混凝土梁抗爆性能试验研究与数值分析［J］.中国科学:物理学 力学 天文学,2020,50(2):024610.
LIU S F, JIN F N, ZHOU Y Z, et al. Experimental study and numerical simulation of explosion resistance of GFRP reinforced concrete beams［J］. Scientia Sinica: Physica,Mechanica & Astronomica,2020,50(2):024610.
［14］田玉祥,苏振驰,邵亚军,等.阀门执行器端盖抗爆性优化及轻量化设计［J］.电子世界,2020(2):151-152.
［15］何翔,孙桂娟,任新见,等.砖隔墙抗爆特性及泄漏空气冲击波效应［J］.科学技术与工程,2020,20(3):899-903.
HE X, SUN G J, REN X J, et al. Blast-resistance of brick partition wall and air leak shock wave effect［J］. Science Technology and Engineering,2020,20(3):899-903.

相似文献/References:

[1]王兵,龙源,马海洋,等.非金属材料抗爆性能试验研究[J].爆破器材,2010,39(01):37.
　WANG Bing,LONG Yuan,MA Haiyang,et al.Tests on the Explosion Resistance Capacity of Non-metallic Material[J].EXPLOSIVE MATERIALS,2010,39(02):37.
[2]殷海权.农用硝酸铵防爆剂试验研究[J].爆破器材,2013,42(02):48.[doi:10.3969/j.issn.1001-8352.2013.02.013]
　YIN Haiquan.Test Research of Explosionproof Agent for Agricultural Ammonium Nitrate[J].EXPLOSIVE MATERIALS,2013,42(02):48.[doi:10.3969/j.issn.1001-8352.2013.02.013]
[3]于江①,时党勇②.聚丙烯纤维混凝土接触爆炸破坏效应的试验和数值分析[J].爆破器材,2008,37(04):1.
　Yu Jiang,Shi Dangyong.Experiment and Numerical Analysis of Polypropylene Fiber Reinforced Concrete Subjected to Contact Blast Loading[J].EXPLOSIVE MATERIALS,2008,37(02):1.
[4]费鸿禄,蒋安俊,杨智广.爆炸荷载作用下FRP管-混凝土-钢管组合柱动态响应的数值模拟研究[J].爆破器材,2018,47(04):27.[doi:10.3969/j.issn.1001-8352.2018.04.005]
　FEI Honglu,JIANG Anjun,YANG Zhiguang.Numerical Simulation of Dynamic Response of FRP Pipe-concrete-steel Pipe Combination Columns Subjected to Explosive Loading[J].EXPLOSIVE MATERIALS,2018,47(02):27.[doi:10.3969/j.issn.1001-8352.2018.04.005]
[5]沈文妮 黄正祥 祖旭东 肖强强 贾鑫 尚伟.接触爆炸下黏土砖砌体墙的抗爆性能[J].爆破器材,2020,49(04):45.[doi:10.3969/j.issn.1001-8352.2020.04.008]
　SHEN Wenni,HUANG Zhengxiang,ZU Xudong,et al.Anti-explosion Performance of Clay Brick Masonry Wall under Contact Blast Load[J].EXPLOSIVE MATERIALS,2020,49(02):45.[doi:10.3969/j.issn.1001-8352.2020.04.008]
[6]张佳庆①,黄玉彪①,陈清②,等.气云爆炸条件下消防炮的抗爆性能研究[J].爆破器材,2024,53(02):29.[doi:10.3969/j.issn.1001-8352.2024.02.005]
　ZHANG Jiaqing,HUANG Yubiao,CHEN Qing,et al.Explosion Resistance Performance of Fire Cannons under Gas Cloud Explosion Conditions[J].EXPLOSIVE MATERIALS,2024,53(02):29.[doi:10.3969/j.issn.1001-8352.2024.02.005]

备注/Memo

备注/Memo:
收稿日期：2020-07-30
第一作者：何晓晖（1975-）,男，博士，副教授，研究领域为机电一体化。 E-mail:1094251715@qq.com
通信作者：沙毅刚（1995-）,男，硕士研究生，主要从事机械设计研究。 E-mail:1099244947@qq.com
更新日期/Last Update: 2021-04-09