[1]石腾飞①,陈明华②,葛强②,等.RDX/Al/AP/HTPB炸药回收过程中AP提取工艺的响应面法优化[J].爆破器材,2018,47(01):54-58.[doi:10.3969/j.issn.1001-8352.2018.01.010]
　SHI Tengfei,CHEN Minghua,GE Qiang,et al.Optimization of AP Extraction Process by Response Surface Method in Recovery of the RDX/Al/AP/HTPB Explosive[J].EXPLOSIVE MATERIALS,2018,47(01):54-58.[doi:10.3969/j.issn.1001-8352.2018.01.010]
点击复制

RDX/Al/AP/HTPB炸药回收过程中AP提取工艺的响应面法优化()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
47
期数:
2018年01
页码:
54-58
栏目:
爆炸材料
出版日期:
2018-01-03

文章信息/Info

Title:
Optimization of AP Extraction Process by Response Surface Method in Recovery of the RDX/Al/AP/HTPB Explosive
文章编号:
5206
作者:
石腾飞①;陈明华②;葛强②;王韶光②
①陆军工程大学（河北石家庄，050003)
②军械技术研究所（河北石家庄，050000）
Author(s):
SHI Tengfei①;  CHEN Minghua②;  GE Qiang②;  WANG Shaoguang②
① PLA Army Engineering University (Hebei Shijiazhuang, 050003)
② Ordnance Technology Research Institute (Hebei Shijiazhuang, 050000)
关键词:
炸药; 高氯酸铵; 提取率; 响应面法
Keywords:
explosive;  ammonium perchlorate (AP);  extraction rate;  response surface method (RSM)
分类号:
TQ560; TJ55
DOI:
10.3969/j.issn.1001-8352.2018.01.010
文献标志码:
A
摘要:
为了回收RDX/Al/AP/HTPB炸药中的高氯酸铵（AP），通过Design Expert 8.0软件进行了响应面实验设计，得出了该工艺的提取率模型，研究了提取时间、超声功率、表面活性剂质量分数等因素对AP提取过程的影响。分析数据得出AP提取工艺的最佳参数，并对其进行了实验验证。结果表明，二次回归模型的拟合方程为：Y=89.82+3.10A+2.65B+0.33C－0.25AB－0.45AC－0.15BC－0.06A2－1.31B2－0.26C2。各因素对提取率的影响程度由大到小为：提取时间、超声功率、表面活性剂质量分数。优化的工艺参数为：提取时间44 min，超声功率960 W，表面活性剂质量分数1.7%，此时AP的提取率达90%以上。
Abstract:
In order to recycle ammonium perchlorate (AP) from the RDX/Al/AP/HTPB explosive, software Design Expert 8.0 was used to design response surface test. Recovery ratio model was fitted. Influence of various factors, such as leaching time, ultrasonic power and surfactant mass fraction, on extraction of AP were also analyzed. Optimum parameters of AP extraction process were obtained by data analysis. Quadratic fitting model is Y=89.82+3.1A+2.65B+0.33C－0.25AB－0.45AC－0.15BC－0.06A2－1.31B2－0.26C2.Significance of each factor on extraction rate in order is leaching time, ultrasonic power, surfactant mass fraction. Optimization of process conditions are leaching time 44 min, ultrasonic power 960 W, and surfactant mass fraction 1.7%. Extraction rate of AP is above 90%.

参考文献/References:

［1］王军，蔺向阳，潘仁明. 废弃复合推进剂组分回收与资源化利用［J］. 材料导报, 2011, 25(12): 69-72.
WANG J, LIN X Y, PAN R M. Recycling component and utilization of waste composite propellant［J］. Materials Review, 2011, 25(12): 69-72.
［2］高兴勇，巩永校，杜仕国，等. 用临界液萃取技术处理复合固体推进剂的工艺研究［J］. 火炸药学报，2001, 24(1): 49-51.
GAO X Y, GONG Y X, DU S G, et al. Process study on disposal solid composite propellant in applying critical fluid extraction technology［J］. Chinese Journal of Explosives & Propellants, 2001, 24(1): 49-51.
［3］HODUL J, DOHN  LKOV  B, DROCHYTKA R. Solidification of hazardous waste with the aim of material utilization of solidification products［J］. Procedia Engineering, 2015, 108:639-646.
［4］李静海. 废弃导弹火工品中火炸药的处理与回收再利用探讨［J］. 国防技术基础, 2007(6): 49-52.
［5］陈亚芳, 王保国, 张景林,等.废旧梯黑铝混合炸药中RDX的回收和表征［J］. 火炸药学报, 2012, 35(4): 23-25.
 CHEN Y F, WANG B G, ZHANG J L, et al. Recovery and characterization of RDX from discarded or obsolete TNT-RDX-Al explosives［J］. Chinese Journal of Explosives & Propellants, 2012, 35(4): 23-25.
［6］荆昌伦, 徐复铭. 过期钝化RDX的再利用研究［J］. 爆破器材, 2008, 37(1): 4-5.
JING C L, XU F M. A study on the recycling of desensitizing RDX of over shelf life［J］. Explosive Materials, 2008, 37(1): 4-5.
［7］荆昌伦, 徐复铭, 侯勇, 等. 过期钝化RDX的水悬浮煮洗分离［J］. 火炸药学报, 2008, 31(1): 23-25. 
JING C L, XU F M, HOU Y, et al. Separation of desensitizing RDX of over shelf life with boiling wash in aquous suspension［J］. Chinese Journal of Explosives & Propellants, 2008, 31(1): 23-25.
［8］王军, 蔺向阳, 潘仁明. 从复合固体推进剂中浸取高氯酸铵的动力学过程［J］. 火炸药学报, 2011, 34(4): 70-74. 
 WANG J, LIN X Y, PAN R M. Dynamic process of ammonium perchlorate leached from composite solid propellant［J］. Chinese Journal of Explosives & Propellants, 2011, 34(4): 70-74.
［9］MYERS R H, MONTGOMERY D C. Response Surface Methodology［J］. New York: Wiley and Sons, 1995.
［10］余小翠, 刘高峰. 响应面分析法在中药提取和制备工艺中的应用［J］. 中药材, 2010, 33(10): 1651-1655.
［11］王永菲, 王成国. 响应面法的理论与应用［J］. 中央民族大学学报（自然科学版）, 2005, 14(3): 236-240.
 WANG Y F, WANG C G. The application of response surface methodology［J］. Journal of the CUN (Natural Sciences Edition), 2005, 14(3): 236-240.
［12］MYERS R H. Response surface methodology-current status and future direction［J］. Journal of Quality Technology, 1999, 31(1):30-44.
［13］BEZERRA M A, SANTELLI R E, OLIVEIRA E P, et al. Response surface methodology (RSM) as a tool for optimization in analytical chemistry［J］. Talanta, 2008, 76(5):965-977.
［14］WANG C H, WEI A S, WU H, et al. Application of response surface methodology to the chemical cleaning process of ultrafiltration membrane［J］. Chinese Journal of Chemical Engineering, 2016, 24(5): 651-657.

相似文献/References:

[1]常新岩,郁刚,徐鸿儒,等.无源自动水喷淋系统[J].爆破器材,2010,39(01):29.
　CHANG Xinyan,YU Gang,XU Hongru,et al.Automatic Water Spray System without Power[J].EXPLOSIVE MATERIALS,2010,39(01):29.
[2]解立峰,韩志伟,王海洋,等.民用炸药敏感度试验方法的研究与探讨[J].爆破器材,2011,40(02):8.
　XIE Lifeng,HAN Zhiwei,WANG Haiyang,et al.The Study of Sensitivity Testing Methods of Civil Explosives[J].EXPLOSIVE MATERIALS,2011,40(01):8.
[3]黄寅生,卢志坚.,卢光明.近年民用爆破器材专利特征分析[J].爆破器材,2009,38(05):22.
　HUANG Yinsheng,LU Zhijian.,LU Guangming.Analysis on Resent Patents of Industrial Explosive Materials[J].EXPLOSIVE MATERIALS,2009,38(01):22.
[4]邓国栋,刘宏英,索莹,等.Al/SiO2复合粒子制备及其催化性能研究[J].爆破器材,2009,38(04):8.
　DENG Guodong,LIU Hongying,SUO Ying,et al.Study on Preparation and Its Catalysis of Composite Particles Al/SiO2[J].EXPLOSIVE MATERIALS,2009,38(01):8.
[5]常新岩,谢永言,郑永芬.工业炸药自动包装线的安全性探讨[J].爆破器材,2009,38(01):8.
　CHANG Xinyan,XIE Yongyan,ZHENG Yongfen.Discussion on Safety of Industrial Explosive Automatic Packing Line[J].EXPLOSIVE MATERIALS,2009,38(01):8.
[6]张袁斌,陈文靖,叶志文.N2O5/HNO3体系硝解三（N-乙酰基）六氢化均三嗪制备RDX[J].爆破器材,2012,41(04):9.
　ZHANG Yuanbin,CHEN Wenjing,YE Zhiwen.Preparation of RDX by Nitrolysis of 1,3,5-Triacetyl Hexahydro-1,3,5-Triazaine with N2O5/HNO3[J].EXPLOSIVE MATERIALS,2012,41(01):9.
[7]黄亚峰,王晓峰,王红星,等.火炸药双螺杆挤出工艺的研究现状与发展[J].爆破器材,2013,42(04):41.[doi:10.3969/j.issn.1001-8352.2013.04.010]
　HUANG Yafeng,WANG Xiaofeng,WANG Hongxing,et al.Research Status and Development of the Twin Screw Extrusion Technology on the propellants and explosives[J].EXPLOSIVE MATERIALS,2013,42(01):41.[doi:10.3969/j.issn.1001-8352.2013.04.010]
[8]封雪松,徐洪涛,田轩,等.含储氢合金炸药的能量研究[J].爆破器材,2013,42(05):13.[doi:10.3969/j.issn.1001-8352.2013.05.003]
　FENG Xuesong,XU Hongtao,TIAN Xuan,et al.Energy Research of Explosive Containing Hydrogen Storage Alloy[J].EXPLOSIVE MATERIALS,2013,42(01):13.[doi:10.3969/j.issn.1001-8352.2013.05.003]
[9]施金秋①,邓国栋①,朱陈森①,等.降低超细高氯酸铵感度的方法研究[J].爆破器材,2014,43(03):9.[doi:10.3969/j.issn.1001-8352.2014.03.003]
　SHI Jinqiu,DENG Guodong,ZHU Chensen,et al.Study on the Method of Reducing the Sensitivity of Ammonium Perchlorate Superfine Powder[J].EXPLOSIVE MATERIALS,2014,43(01):9.[doi:10.3969/j.issn.1001-8352.2014.03.003]
[10]刘艳萍,金大勇,高玉玲,等.DNAN基含铝熔铸炸药倒药方法研究[J].爆破器材,2014,43(05):51.[doi:10.3969/j.issn.1001-8352.2014.05.011]
　LIU Yanping,JIN Dayong,GAO Yuling,et al.Study on the Chargeinverted Method of DNANbased Aluminized Meltcast Explosive[J].EXPLOSIVE MATERIALS,2014,43(01):51.[doi:10.3969/j.issn.1001-8352.2014.05.011]

备注/Memo

备注/Memo:
收稿日期：2017-08-26
作者简介：石腾飞（1993－），男，硕士研究生，主要从事含能材料的分离回收工作。E-mail：1724607911@qq.com
更新日期/Last Update: 2018-01-03