[1]刘晶①②,景青①②,陈松①②,等.硝化甘油喷射硝化器喷雾效果优化及试验验证[J].爆破器材,2016,45(05):1-6.[doi:10.3969/j.issn.1001-8352.2016.05.001]
 LIU Jing,JING Qing,CHEN Song,et al.Optimization and Experiment Verification of Nitration Spray Characteristic Used in Nitroglycerin[J].EXPLOSIVE MATERIALS,2016,45(05):1-6.[doi:10.3969/j.issn.1001-8352.2016.05.001]
点击复制

硝化甘油喷射硝化器喷雾效果优化及试验验证()
分享到:

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
45
期数:
2016年05
页码:
1-6
栏目:
基础理论
出版日期:
2016-09-30

文章信息/Info

Title:
Optimization and Experiment Verification of Nitration Spray Characteristic Used in Nitroglycerin
文章编号:
5097
作者:
刘晶①②景青①②陈松①②秦能①②康超①②马宁①②周致富
①西安近代化学研究所(陕西西安,710065) 
②氟氮化工资源高效开发与利用国家重点实验室(陕西西安,710065)
③西安交通大学动力工程多相流国家重点实验室(陕西西安,710049)
Author(s):
LIU Jing①② JING Qing①② CHEN Song①② QIN Neng①② KANG Chao①② MA Ning①② ZHOU Zhifu
①Xi’an Modern Chemistry Research Institute (Shaanxi Xi’an, 710065)
②State Key Laboratory of Fluorine & Nitrogen Chemicals (Shaanxi Xi’an, 710065)
③State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University (Shaanxi Xi’an, 710049)
关键词:
硝化甘油喷射硝化PDA检测技术优化分析
Keywords:
nitroglycerin spray nitration PDA detection technonlgy optimized analysis
分类号:
TJ55
DOI:
10.3969/j.issn.1001-8352.2016.05.001
文献标志码:
A
摘要:
喷射硝化法是目前最常用制备硝化甘油的硝化方法,但实际应用中常会出现批次与批次之间喷射效果差别太大、雾化效果不均匀等情况,对硝化甘油的制备产生了一定程度的影响。为了分析不同结构参数对喷射器喷射效果的影响,进而优化喷射器的结构,本文使用相位多普勒技术(PDA)的检测方法,检测了不同喷嘴安装形式、不同加工精度、不同流体喷嘴的轴向位置等不同结构参数下喷雾颗粒的粒径及速度分布。通过试验,得出了不同结构参数下雾化颗粒粒径、颗粒速度的轴向及径向分布规律,并得出了最优喷射器喷嘴结构,使雾化后颗粒的粒径降低至40 μm以下,颗粒速度降低至3 m/s,对工厂的实际生产有一定的指导作用。
Abstract:
Spray nitration is the most common nitration method used in the production of nitroglycerin. But in the practical application, the spray often appears obvious inconsistency from batch to batch so that the inhomogeneity affects the production of nitroglycerin. In order to analyze the influence of different spray structure parameters to spray characteristic and optimize the spray structure, distribution of particle size and velocity of spray granular in different structure parameters, such as different nozzle types, machining precision, axial position of spray nozzle, were detected by phase Doppler analyzer(PDA). By means of experiment, distribution rule of particle size and velocity both in axial and radial direction were also obtained, and the optimal spray structure which made the particle diameter reduced to 40 μm, and the particle velocity reduced to 3 m/s was determined. This conclusion plays a role in guiding the actual production in factory.

参考文献/References:

[1]马昕霞, 袁益超, 黄鸣,等.环周进水汽-液两相喷射性能优化[J]. 热能动力工程,2012,27(1):33-37.
MA X X, YUAN Y C, HUANG M,et al.Optimization of full-arc water-admission steam-liquid two-phase jet flow performance[J].Journal of Engineering for Thermal Energy and Power,2012,27(1):33-37.
[2]CHANG Y J,CHEN Y M. Enhancement of a steam-jet refri-gerator using a novel application of the petal nozzle[J]. Experimental Thermal and Fluid Science, 2000, 22(3): 203-211.
[3]张少维,徐海涛,桑芝富. 新型喷嘴结构下蒸汽喷射式热泵性能的数值研究[J]. 热能动力工程,2004,19(5): 506-509.
 ZHANG S W, XU H T, SANG Z F.Numerical study of the performance of steamer jet heat pumps with an innovative nozzle structure[J].Joural of Engneering for Thermal Energy and Power, 2004,19(5): 506-509.
[4]季红军,陶乐仁,王金锋,等.喷嘴位置对喷射器的性能影响的研究[J]. 制冷,2007,26(4):16-19.
JI H J, TAO L R, WANG J F,et al.Study the influence of nozzle position on ejector performance[J].Refrigeration,2007,26(4):16-19.
[5]陈向阳,袁丹青,王冠军,等. 多喷嘴液体射流泵的设计及试验研究[J]. 中国农村水利水电,2009(4):49-53.
CHEN X Y, YUAN D Q, WANG G J,et al.Design of the multi-nozzle water jet pump and experimental research on it[J].China Rural Water and Hydropower, 2009(4):49-53.
[6]王锁芳,李立国. 多喷管引射器的性能分析[J]. 南京航空航天大学学报,1996,28(3): 350-356.
WANG S F, LI L G.Performance analysis of amultinozzle ejector[J].Journal of Nanjing University of Aeronautics & Astronautics, 1996,28(3): 350-356.
[7]段新胜,孙孝庆. 环形多喷嘴射流泵结构参数的实验研究[J]. 探矿工程,1999(6):17-19.
 DUAN X S,SUN X Q.The experimental study on compositional parameters of the annular multinozzle jet pump[J].Exploration Engineering (Drilling & Tunneling),1996(6):17-19.
[8]NAHDI E,CHAMPOUSSIN J C,HOSTACHE G. Optimum geometric parameters of a cooling ejectorcompressor[J].International Journal of Refrigeration,I993,16(1):67-72.
[9]程效民. 喷射器结构参数优化设计[J]. 化学工程,1994(3):71-73.
[10]陆宏圻. 喷射技术的理论及应用[M]. 武汉: 武汉大学出版社,2004: 336-345.
[11]索科洛夫 E.Я,津格尔 H.M. 喷射器[M]. 黄秋云,译. 北京: 科学出版社,1977: 176-180.

相似文献/References:

[1]何那仁朝格图,邓国栋,鲁磊明,等.改性双基推进剂制备中硝化甘油的连续加料与计量技术[J].爆破器材,2017,46(04):59.[doi:10.3969/j.issn.1001-8352.2017.04.013]
 HE Narenchaogetu,DENG Guodong,LU Leiming,et al.Continuous Feeding and Measurement of Nitroglycerin in Preparation Process of Modified Double-base Propellant[J].EXPLOSIVE MATERIALS,2017,46(05):59.[doi:10.3969/j.issn.1001-8352.2017.04.013]
[2]唐杰①,魏应东①,吴兴龙①,等.微反应系统合成硝化甘油的工艺研究[J].爆破器材,2020,49(05):36.[doi:10.3969/j.issn.1001-8352.2020.05.007]
 TANG Jie,WEI Yingdong,WU Xinglong,et al.Study on the Micro-chemical Synthesis Process of Nitroglycerin[J].EXPLOSIVE MATERIALS,2020,49(05):36.[doi:10.3969/j.issn.1001-8352.2020.05.007]

备注/Memo

备注/Memo:
收稿日期:2016-05-18
基金项目:国防科工委基础产品创新计划火炸药科研专项
作者简介:刘晶(1988-),女,工程师,主要从事火炸药工艺研究。E-mail:15901165735@163.com
通信作者:景青(1969-),男,高工,主要从事火炸药工艺研究。E-mail:Jq204@163.com
更新日期/Last Update: 2016-09-30