参考文献/References:
［1］陈嘉琨,范钦文,高耀林.塑料导爆管［M］.北京:国防工业出版社,1987.
［2］高耀林,范钦文,陈嘉琨.塑料导爆管起爆过程［J］.爆破器材,1984(4):1-5.
［3］魏伴云.导爆管起爆系统的现状与展望［J］.地球科学,1985(3):119-126.
Wei Banyun. Prospects and present status on firing system of detonator tube［J］.Earth Science,1985(3):119-126.
［4］陈士海,胡峰.导爆管的起爆特性［J］.爆破,1990(2):9-12.
Chen Shihai, Hu Feng. Initiating characteristic of nonel［J］.Blasting,1990(2):9-12.
［5］阳世清.低装填密度粉状炸药爆轰机理研究——塑料导爆管起爆与传爆过程［D］.南京：南京理工大学,1990.
［6］刘大斌.塑料导爆管的起爆、传爆及输出性能研究［D］.南京：南京理工大学,2002.
Liu Dabin. Study of the initiation, explosion transfering and output character of Nonel tube［D］. Nanjing：Nanjing University of Science & Technology,2002.
［7］范钦文,高耀林,陈嘉琨.塑料导爆管稳定传爆的物理模型［J］.爆破器材,1984(2):8-12.
［8］陈士海,胡峰.导爆管中爆轰波的结构［J］.爆破器材,1988(5):4.
［9］沙文健.塑料导爆管反应区温度分布的近似计算［J］.爆破器材,1992(4):2-6.
Sha Wenjian. Approximate calculation of the temperature distribution in a detonating Nonel tube［J］.Explosive Materials,1992(4):2-6.
［10］魏伴云,赵建勤,朱建平.模拟导爆管传爆过程的高速纹影摄影与分析［J］.爆破器材,1985(3):3-5.
［11］何中其,彭金华,刘大斌,等.导爆管传爆性能设计与参数分析［J］.爆破器材,2010,39(3):1-3,7.
He Zhongqi, Peng Jinhua, Liu Dabin, et al. Analysis and design of detonation parameters in nonel tube［J］. Explosive Materials,2010,39(3):1-3,7.
［12］Yang L C,Do I H P. Nonelectrical tube explosive transfer system［J］.AIAA Journal, 2000,38(12)：2260-2267.
［13］胡升海，房泽法，巫雨田.基于高速摄像的断药导爆管传爆过程研究［J］.爆破器材，2013，42（3）：41-44.
Hu Shenghai,Fang Zefa,Wu Yutian. Research on detonation propagating process of explosive faults Nonel tube by high speed photography［J］.Explosive Materials,2013,42(3):41-44
［14］廖小翠.导爆管传爆可靠性的试验研究［D］.绵阳:西南科技大学,2009.
Liao Xiaocui. Experimental study on the detonation propagation reliability of Nonel tube［D］.Mianyang:Southwest University of Science and Technology,2009.
相似文献/References:
[1]何中其,彭金华,刘大斌,等.导爆管传爆性能设计与参数分析[J].爆破器材,2010,39(03):1.
HE Zhongqi,PENG Jinhua,LIU Dabin,et al.Analysis and Design of Detonation Parameters in Nonel Tube[J].EXPLOSIVE MATERIALS,2010,39(04):1.
[2]钱华①②,刘大斌①.塑料导爆管药粉粘附性评价方法研究[J].爆破器材,2013,42(01):26.[doi:10.3969/j.issn.1001-8352.2013.01.007]
QIAN Hua,LIU Dabin.The Assessment Methodology Study on the Adhesivity of Explosive Powder to Detonating Tube[J].EXPLOSIVE MATERIALS,2013,42(04):26.[doi:10.3969/j.issn.1001-8352.2013.01.007]
[3]钱华①②,刘大斌①,甘德淮③,等.高药粉粘附性导爆管的设计及性能测试[J].爆破器材,2013,42(02):37.[doi:10.3969/j.issn.1001-8352.2013.02.010]
QIAN Hua,LIU Dabin,GAN Dehuai,et al.Design of the Adhesive Shock Tube and its performance[J].EXPLOSIVE MATERIALS,2013,42(04):37.[doi:10.3969/j.issn.1001-8352.2013.02.010]
[4]汪泉①②③,沈兆武①,郭子如②,等.基于高速摄像的半开口管道内瓦斯预混火焰传播特征的分析[J].爆破器材,2013,42(05):18.[doi:10.3969/j.issn.1001-8352.2013.05.004]
WANG Quan,SHEN Zhaowu,GUO Ziru,et al.Analysis on Propagation Characteristics of Premixed Methane-air Flame in an Half-Open Tube Based on High-Speed Video Camera[J].EXPLOSIVE MATERIALS,2013,42(04):18.[doi:10.3969/j.issn.1001-8352.2013.05.004]
[5]陈雄胜①②.导爆管性能测试研究[J].爆破器材,2015,44(03):48.[doi:10.3969/j.issn.1001-8352.2015.03.011]
CHEN Xiongsheng.Test Study on Properties of Nonel Tube[J].EXPLOSIVE MATERIALS,2015,44(04):48.[doi:10.3969/j.issn.1001-8352.2015.03.011]
[6]张朝阳.导爆药粉下药装置的改进及分析[J].爆破器材,2015,44(04):37.[doi:10.3969/j.issn.1001-8352.2015.04.009]
ZHANG Zhaoyang.Improvement and Analysis of a Charging Machine for Nonel Explosive Powder[J].EXPLOSIVE MATERIALS,2015,44(04):37.[doi:10.3969/j.issn.1001-8352.2015.04.009]
[7]王川,李茂泉.一种新型导爆管下药系统的研究[J].爆破器材,2017,46(01):46.[doi:10.3969/j.issn.1001-8352.2017.01.010]
WANG Chuan,LI Maoquan.A New Powder Dosing System for the Detonating Tube[J].EXPLOSIVE MATERIALS,2017,46(04):46.[doi:10.3969/j.issn.1001-8352.2017.01.010]
[8]吕莎莎①,王海亮①,王万仁②,等.基于高速摄像的导爆管传爆过程研究[J].爆破器材,2020,49(01):40.[doi:10.3969/j.issn.1001-8352.2020.01.008]
L Shasha,WANG Hailiang,WANG Wanren,et al.Research on Detonating Process of Nonel Tube by High Speed Camera[J].EXPLOSIVE MATERIALS,2020,49(04):40.[doi:10.3969/j.issn.1001-8352.2020.01.008]
[9]胡升海,房泽法,巫雨田.基于高速摄像的断药导爆管传爆过程研究[J].爆破器材,2013,42(03):41.[doi:10.3969/j.issn.1001-8352.2013.03.010]
HU Shenghai,FANG Zefa,WU Yutian.Research on Detonation Propagating Process of Explosive Faults Nonel Tube by High Speed Photography[J].EXPLOSIVE MATERIALS,2013,42(04):41.[doi:10.3969/j.issn.1001-8352.2013.03.010]