[1]解立峰,韩志伟,王海洋,等.民用炸药敏感度试验方法的研究与探讨[J].爆破器材,2011,40(02):8-10、13.
 XIE Lifeng,HAN Zhiwei,WANG Haiyang,et al.The Study of Sensitivity Testing Methods of Civil Explosives[J].EXPLOSIVE MATERIALS,2011,40(02):8-10、13.
点击复制

民用炸药敏感度试验方法的研究与探讨()
分享到:

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
40
期数:
2011年02
页码:
8-10、13
栏目:
基础理论
出版日期:
2011-04-20

文章信息/Info

Title:
The Study of Sensitivity Testing Methods of Civil Explosives
文章编号:
4351
作者:
解立峰韩志伟王海洋陈际洋
(南京理工大学化工学院,江苏南京210094)
Author(s):
XIE Lifeng HAN Zhiwei WANG Haiyang CHEN Jiyang
School of Chemical engineering, Nanjing University of Science and Technology (Nanjing, Jiangsu, 210094)
关键词:
炸药敏感度巷道试验半数感应量鉴别比
Keywords:
explosives sensitivity tunnel testing half reaction amount identifying ratio
分类号:
O381 TD235.2+1
文献标志码:
A
摘要:
敏感度试验的传统试验方案是在规定的刺激水平上进行规定次数的试验,如果试样不发生感应,即判为合格,否则即判为不合格。该文以煤矿炸药瓦斯安全性为例,对此进行了比较详细的探讨,f=0/5这种传统试验方案是不可靠和不科学的,并提出半数感应量是比较合理的试验方案。
Abstract:
In the conventional sensitivity testing methods for civil explosives, the explosive sample is tested at regular stimulus level for regular times. If the explosive sample is not reacted or not stimulated, then the explosive tested is regarded as qualified, or otherwise it is unqualified. In this paper, the sensitivity testing methods of civil explosives are studied in detail, and the gas safety of coalmine explosive is taken as an example. It is found that the conventional testing method of f=0/5 is unreliable and unscientific while that of the half reaction amount is reasonable.

参考文献/References:

[1]W.J.Dixon. A.M.Mood. A method for obtaining and analyzing sensitivity data[J]. Journal of the American Statistical Association, 1948, 43(241):109-26. [2]Charles M.Mason. Methods for evaluating Explosives and Hazardous Materials[M].Michigan:University of Michigan,1972.:8-10. [3]陈正衡编译. 工业炸药测试新技术[M]. 北京:煤炭工业出版社, 1982:131-135.[4]郭祖超,等. 医用数理统计方法[M]. 北京:人民卫生出版社,1963:169-170. [5]H.T.Ramsay, J.S.Seayer .On the Influence of the Permitted Ignition Rate in the Assessment of Explosives[J].Safety in Mines Research Establishment Report,1961(209):23 -27.[6]B.L.Amstadter.彭兴文译.可靠性数学[M]. 北京:科学出版社,1978:391-392.

相似文献/References:

[1]常新岩,郁刚,徐鸿儒,等.无源自动水喷淋系统[J].爆破器材,2010,39(01):29.
 CHANG Xinyan,YU Gang,XU Hongru,et al.Automatic Water Spray System without Power[J].EXPLOSIVE MATERIALS,2010,39(02):29.
[2]黄寅生,卢志坚.,卢光明.近年民用爆破器材专利特征分析[J].爆破器材,2009,38(05):22.
 HUANG Yinsheng,LU Zhijian.,LU Guangming.Analysis on Resent Patents of Industrial Explosive Materials[J].EXPLOSIVE MATERIALS,2009,38(02):22.
[3]常新岩,谢永言,郑永芬.工业炸药自动包装线的安全性探讨[J].爆破器材,2009,38(01):8.
 CHANG Xinyan,XIE Yongyan,ZHENG Yongfen.Discussion on Safety of Industrial Explosive Automatic Packing Line[J].EXPLOSIVE MATERIALS,2009,38(02):8.
[4]解立峰,韩志伟,解一超,等.小样本升降试验法在巷道检验中应用的可行性研究[J].爆破器材,2011,40(05):5.
 XIE Lifeng,HAN Zhiwei,XIE Yichao,et al.Study on the Feasibility of the Application of Up-and-down Method with Small Sample in Tunnel Test[J].EXPLOSIVE MATERIALS,2011,40(02):5.
[5]张袁斌,陈文靖,叶志文.N2O5/HNO3体系硝解三(N-乙酰基)六氢化均三嗪制备RDX[J].爆破器材,2012,41(04):9.
 ZHANG Yuanbin,CHEN Wenjing,YE Zhiwen.Preparation of RDX by Nitrolysis of 1,3,5-Triacetyl Hexahydro-1,3,5-Triazaine with N2O5/HNO3[J].EXPLOSIVE MATERIALS,2012,41(02):9.
[6]黄亚峰,王晓峰,王红星,等.火炸药双螺杆挤出工艺的研究现状与发展[J].爆破器材,2013,42(04):41.[doi:10.3969/j.issn.1001-8352.2013.04.010]
 HUANG Yafeng,WANG Xiaofeng,WANG Hongxing,et al.Research Status and Development of the Twin Screw Extrusion Technology on the propellants and explosives[J].EXPLOSIVE MATERIALS,2013,42(02):41.[doi:10.3969/j.issn.1001-8352.2013.04.010]
[7]封雪松,徐洪涛,田轩,等.含储氢合金炸药的能量研究[J].爆破器材,2013,42(05):13.[doi:10.3969/j.issn.1001-8352.2013.05.003]
 FENG Xuesong,XU Hongtao,TIAN Xuan,et al.Energy Research of Explosive Containing Hydrogen Storage Alloy[J].EXPLOSIVE MATERIALS,2013,42(02):13.[doi:10.3969/j.issn.1001-8352.2013.05.003]
[8]刘艳萍,金大勇,高玉玲,等.DNAN基含铝熔铸炸药倒药方法研究[J].爆破器材,2014,43(05):51.[doi:10.3969/j.issn.1001-8352.2014.05.011]
 LIU Yanping,JIN Dayong,GAO Yuling,et al.Study on the Chargeinverted Method of DNANbased Aluminized Meltcast Explosive[J].EXPLOSIVE MATERIALS,2014,43(02):51.[doi:10.3969/j.issn.1001-8352.2014.05.011]
[9]杨惠,杨建钢,方学谦.支持向量机法预测单质炸药爆速的研究[J].爆破器材,2015,44(02):28.[doi:10.3969/j.issn.1001-8352.2015.02.007]
 YANG Hui,YANG Jiangang,FANG Xueqian.Prediction the Detonating Velocity of Elemental Explosives by Support Vector Machine[J].EXPLOSIVE MATERIALS,2015,44(02):28.[doi:10.3969/j.issn.1001-8352.2015.02.007]
[10]赵晓莉,夏斌,刘尊义,等.模拟高原环境对炸药爆速影响的试验研究[J].爆破器材,2015,44(02):36.[doi:10.3969/j.issn.1001-8352.2015.02.009]
 ZHAO Xiaoli,XIA Bin,LIU Zunyi,et al.Experimental Research on Detonation Velocity of Explosive in Simulated Plateau Environment[J].EXPLOSIVE MATERIALS,2015,44(02):36.[doi:10.3969/j.issn.1001-8352.2015.02.009]

备注/Memo

备注/Memo:
收稿日期:2010-12-28 作者简介:解立峰(1965~),男,博士,副教授。主要从事多相爆轰理论及应用、安全科学技术研究与教学工作。
更新日期/Last Update: 2011-05-05