[1]杨长青,王有会.浅谈影响乳胶基质物理敏化密度的因素[J].爆破器材,2011,40(02):20-22.
　YANG Changqing,WANG Youhui.Brief Discussion on the Factors Affecting Physical Sensitization Density of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2011,40(02):20-22.
点击复制

浅谈影响乳胶基质物理敏化密度的因素()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
40
期数:
2011年02
页码:
20-22
栏目:
爆炸材料
出版日期:
2011-04-20

文章信息/Info

Title:
Brief Discussion on the Factors Affecting Physical Sensitization Density of Emulsion Matrix
文章编号:
4346
作者:
杨长青; 王有会
（陕西红旗民爆集团榆林鸿泰公司，陕西榆林719000）
Author(s):
YANG Changqing; WANG Youhui
Yulin Hongtai Co., Ltd. of Shaanxi Hongqi Industry Explosive Group (Shaanxi Yulin, 719000)
关键词:
乳胶基质; 物理敏化; 膨胀珍珠岩; 密度
Keywords:
emulsion matrix;  physical sensitization;  expansion perlite;  density
分类号:
TD235.2+1
文献标志码:
A
摘要:
文章介绍了乳化炸药及其敏化技术，分析了膨胀珍珠岩的粒度、憎水性、加入量、混拌温度、掺混时间及乳胶基质黏稠度等因素对乳胶基质物理敏化密度的影响。同时提出了加入膨胀珍珠岩2%～3%，敏化密度1.05～1.15g/cm3、掺混时间60～90s等相应的最佳控制参数和措施来减少影响乳胶基质物理敏化密度的因素。进而达到提高乳化炸药产品质量的目的。
Abstract:
The emulsion explosive and sensitization technology were induced in this paper, and the impact of factors on the physical sensitization density of matrix was discussed, such as expansion perlite size, hydrophobicity, adding amount, mixing temperature, mixing time, and viscosity of matrix et al. The corresponding best control parameters and measures with adding expansion perlite 2%~3%, sensitization density 1.05~1.15 g/m3, mixing time 60~90 s is proponed to decrease the impact of the factors, for the aim of improving the emulsion product quality.

参考文献/References:

［1］汪旭光．乳化炸药［M］.北京：冶金工业出版社，2008：100127,472-476.［2］陈飞.珍珠岩敏化技术参数对乳化炸药性能的影响［J］.爆破器材,2002,31(1):10-13.［3］吕春绪. 工业炸药理论［M］.北京:兵器工业出版社,2003:59-62.［4］王波.乳化炸药油相材料的研究［J］.矿业快报，2002(12):5-7.［5］张命林.乳化炸药生产过程中破乳问题分析［J］.煤矿爆破,2007(4):18-19.

相似文献/References:

[1]谢圣艳,高欣,张洪文.浅谈木粉在膨化硝铵炸药中的物理敏化作用[J].爆破器材,2010,39(05):15.
　XIE Shengyan,GAO Xin,ZHANG Hongwen.Discussion on Physical Sensitization of Wood Powder in Expanded Ammonium Nitrate Explosive[J].EXPLOSIVE MATERIALS,2010,39(02):15.
[2]徐志祥,叶志文,刘大斌,等.乳胶基质流动模型及其温度和速度的分布研究[J].爆破器材,2009,38(02):5.
　XU zhixiang,YE zhiwen,LIU Dabin,et al.Study on Flow Model and Distribution of Temperature and Pressure of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2009,38(02):5.
[3]陈飞,邢光武,甘德淮,等.敞开式无动力冷却器的研制[J].爆破器材,2011,40(04):12.
　CHEN Fei,XING Guangwu,GAN Dehuai,et al.Development of Open Unpowered Cooler[J].EXPLOSIVE MATERIALS,2011,40(02):12.
[4]陈飞,邢光武,江志华,等.多元易发泡型复合乳化剂乳化炸药的制备[J].爆破器材,2011,40(06):23.
　CHEN Fei,XING Guangwu,JIANG Zhihua,et al.Preparation of Emulsion Explosive Containing Multielement Foaming Composite Emulsifying Agent[J].EXPLOSIVE MATERIALS,2011,40(02):23.
[5]开俊俊,申卫峰,雷鹏灿,等.乳胶基质微乳液低温快速发泡技术的研究[J].爆破器材,2013,42(02):31.[doi:10.3969/j.issn.1001-8352.2013.02.008]
　KAI Junjun,SHEN Weifeng,LEI Pengcan,et al.Research on the Low Temperature Rapid Foaming Technology of Microemulsion for Emulsion Matrix[J].EXPLOSIVE MATERIALS,2013,42(02):31.[doi:10.3969/j.issn.1001-8352.2013.02.008]
[6]迟洪鹏,李鑫,查正清,等.乳胶基质运输车储存罐体及输送系统设计[J].爆破器材,2015,44(01):28.[doi:10.3969/j.issn.10018352.2015.01.007]
　CHI Hongpeng,LI Xin,ZHA Zhengqing,et al.Design of Storage Tank and Conveying System of Emulsion Matrix Truck[J].EXPLOSIVE MATERIALS,2015,44(02):28.[doi:10.3969/j.issn.10018352.2015.01.007]
[7]宋力骞,叶志文,徐乾.优质失水山梨醇倍半油酸酯的合成[J].爆破器材,2015,44(04):24.[doi:10.3969/j.issn.1001-8352.2015.04.006]
　SONG Liqian,YE Zhiwen,XU Qian.Synthesis of High Quality Sorbitan Sesquioleate[J].EXPLOSIVE MATERIALS,2015,44(02):24.[doi:10.3969/j.issn.1001-8352.2015.04.006]
[8]吴鹏①,刘静平①②,陈相③,等.温度冲击对车载乳胶基质安全性的影响[J].爆破器材,2016,45(01):56.[doi:10.3969/j.issn.1001-8352.2016.01.013]
　WU Peng,LIU Jingping,CHEN Xiang,et al.Effect of Temperature Shock on the Safety of Vehicle Emulsion Matrix[J].EXPLOSIVE MATERIALS,2016,45(02):56.[doi:10.3969/j.issn.1001-8352.2016.01.013]
[9]綦海军,明刚,刘再强,等.乳胶基质管路的压力降研究与安全性分析[J].爆破器材,2016,45(02):47.[doi:10.3969/j.issn.1001-8352.2016.02.012]
　QI Haijun,MING Gang,LIU Zaiqiang,et al.Research on Pressure Drop and Safety in Transport Pipes of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2016,45(02):47.[doi:10.3969/j.issn.1001-8352.2016.02.012]
[10]张小勇,周宇,杨敏会,等.30 t级乳胶基质配送车的设计研究[J].爆破器材,2018,47(01):37.[doi:10.3969/j.issn.1001-8352.2018.01.007]
　ZHANG Xiaoyong,ZHOU Yu,YANG Minhui,et al.Design and Research of an Emulsion Matrix Delivery Vehicle with the Capacity of 30 Tons[J].EXPLOSIVE MATERIALS,2018,47(02):37.[doi:10.3969/j.issn.1001-8352.2018.01.007]

备注/Memo

备注/Memo:
收稿日期：2010-12-13 作者简介：杨长青(1969~)男,助理工程师，主要从事乳化炸药生产管理工作。
更新日期/Last Update: 2011-05-05