[1]陈虎林,李广新.爆炸荷载作用下金属板塑性变形范围的近似计算[J].爆破器材,2011,40(01):5-8.
　CHEN HulinLI Guangxin.Approximate Calculation on the Scope of Plastic Deformation for Metal Plate under Blast Load[J].EXPLOSIVE MATERIALS,2011,40(01):5-8.
点击复制

爆炸荷载作用下金属板塑性变形范围的近似计算()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
40
期数:
2011年01
页码:
5-8
栏目:
基础理论
出版日期:
2011-02-20

文章信息/Info

Title:
Approximate Calculation on the Scope of Plastic Deformation for Metal Plate under Blast Load
文章编号:
4298
作者:
陈虎林1; 李广新2
(1.中国空空导弹研究院，河南洛阳471009；2.总参工程兵科研三所，河南洛阳471023）
Author(s):
CHEN Hulin1LI Guangxin2
1. China Airborne Missle Academy (He’nan Luoyang, 471009) 2.The Third Engineer Scientific Research Institute of the Headquarters of the General Staff (He’nan Luoyang, 471023)
关键词:
接触爆炸; 塑性变形; 应力波; 金属板
Keywords:
contact explosion;  plastic deformation;  stress wave;  metal plate
分类号:
O383 TD235.1+1
文献标志码:
A
摘要:
为确定金属板在爆炸荷载作用下的塑性区范围，根据爆炸产物膨胀理论，结合金属板的材料性能，推导了一定形状装药与金属板接触爆炸的塑性区域公式。通过化爆试验实测了板的塑性变形范围。比较计算结果与试验结果表明，理论得到的板塑性区范围与试验结果较吻合。
Abstract:
In order to define the plastic zone of metal plate under explosion load, based on expansion theory of detonation outcome and transmission analysis of stress wave between interfaces, combined with property of metal plate, a formula of plastic zone is deduced about metal plate under contact explosion of charge with a given form. An explosion test is implemented to determine the plastic zone of plate. Comparison between the experimental value and calculation value indicates a good agreement.

参考文献/References:

［1］Huth J H, Cole J D. Elasticstress waves produced by pressure loads on a spherical shell［J］. Journal of Applied Mechanics,1955(2):474487.［2］Baker W E, Hu W C L and Jackson T R. Elastic response of thin spherical shells to axisymmetric blast loading［J］. Journal of Applied Mechanics,1966(3):800806.［3］Chou P C and Koenig H A. A unified approach to cylindrical and spherical elastic waves by method of characteristics［J］.Journal of Applied Mechanics,1966(3):159167.［4］Rose J L, Chou S C and Chou P C. Vibration analysis of thickwalled spheres and cylinders［J］. Journal of the Acoustical Society of America, 1973(3):771776.［5］Pao Y H and Ceranoglu A N. Determination of transient responses of a thickwalled spherical shell by the ray theory［J］.Journal of Applied Mechanics,1978(5):114122.［6］李永池.径向惯性对薄壁管中弹塑性复合应力波传播的影响［J］.固体力学学报,2000(2):8892.［7］J.S.Whittier and J.P.Jones.Axially symmetric wave propagation in a twolayered cylinder［J］. Int.J. Solids Struct,1967(4):657675.［8］Wang X.Stress wave propagation in a twolayered cylinder with initial interface pressure［J］. Int.J.Solids Struct,1993(12):691700.［9］N.Rattanawangcharoen, A.H.Shah and S.K. Datta.Wave propagation in laminated composite circular cylinders［J］.Int.J Solids Struct,1992(6):767781.［10］北京工业学院八系.爆炸及其作用［M］.北京:国防工业出版社,1979.［11］周南,乔登江.脉冲束辐照材料动力学［M］.北京:国防工业出版社,2002.［12］杨政,郭万林,董蕙如.X70管线钢冲击韧性试验研究［J］.金属学报,2003(2):100104.［13］李年,朱维斗,霍春勇.国产x70管线钢的包申格效应［D］.上海：中国科学院上海冶金研究所，2000.

相似文献/References:

[1]于江①,时党勇②.聚丙烯纤维混凝土接触爆炸破坏效应的试验和数值分析[J].爆破器材,2008,37(04):1.
　Yu Jiang,Shi Dangyong.Experiment and Numerical Analysis of Polypropylene Fiber Reinforced Concrete Subjected to Contact Blast Loading[J].EXPLOSIVE MATERIALS,2008,37(01):1.
[2]程辰①②,林明①,龙源②,等.基于爆炸现场破坏分析的TNT当量快速估算方法研究[J].爆破器材,2018,47(03):37.[doi:10.3969/j.issn.1001-8352.2018.03.007]
　CHENG Chen,LIN Ming,LONG Yuan,et al.Fast Estimation Method of TNT Equivalent Based on Onsite Damage Analysis[J].EXPLOSIVE MATERIALS,2018,47(01):37.[doi:10.3969/j.issn.1001-8352.2018.03.007]
[3]沈文妮 黄正祥 祖旭东 肖强强 贾鑫 尚伟.接触爆炸下黏土砖砌体墙的抗爆性能[J].爆破器材,2020,49(04):45.[doi:10.3969/j.issn.1001-8352.2020.04.008]
　SHEN Wenni,HUANG Zhengxiang,ZU Xudong,et al.Anti-explosion Performance of Clay Brick Masonry Wall under Contact Blast Load[J].EXPLOSIVE MATERIALS,2020,49(01):45.[doi:10.3969/j.issn.1001-8352.2020.04.008]

备注/Memo

备注/Memo:
收稿日期：2010-06-17基金项目：南京科技创新工作站项目（NJCXRW20030235）作者简介：陈虎林（1977~）,男，工程师，从事结构强度、冲击动力学研究。
更新日期/Last Update: 2011-03-29