[1]荆术祥,钱华,刘大斌,等.装药量对塑料导爆管传爆性能的影响[J].爆破器材,2010,39(05):4-6.
　JING Shuxiang,QIAN Hua,LIU Dabin,et al.Influence of the Explosive Charge on Explosion Propagation of the Nonel Tube[J].EXPLOSIVE MATERIALS,2010,39(05):4-6.
点击复制

装药量对塑料导爆管传爆性能的影响()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
39
期数:
2010年05
页码:
4-6
栏目:
基础理论
出版日期:
2010-10-20

文章信息/Info

Title:
Influence of the Explosive Charge on Explosion Propagation of the Nonel Tube
文章编号:
4294
作者:
荆术祥; 钱华; 刘大斌; 朱长江; 鲍国钢; 侯建华
(南京理工大学化工学院，江苏南京210094)
Author(s):
JING Shuxiang;  QIAN Hua;  LIU Dabin;  ZHU Changjiang;  BAO Guogang;  HOU Jianhua
School of Chemical Engineering, Nanjing University of Science and Technology (Jiangsu Nanjing, 210094)
关键词:
塑料导爆管; 装药量; 传爆性能; 可靠性
Keywords:
Nonel tube;  explosive charge;  explosion propagation;  reliability
分类号:
TJ45+7
文献标志码:
A
摘要:
对不同装药量的聚乙烯导爆管的传爆性能进行测试，试验结果表明：温度为25℃时，装药量在13.64～21.90mg/m的范围内，爆速的变化范围为1887～1931 m/s，爆速随装药量的增加而逐渐增大；当装药量为21.90 mg/m时管壁被击穿；装药量为13.64 mg/m时，未见其感度降低和传爆不可靠。
Abstract:
Explosion propagation of the Polyethylene pipe Nonel with different explosive charge was tested. Experiments show that the detonation velocity is ranged from 1887m/s to 1931 m/s as the explosive charge varied from 13.64 mg/m to 21.90mg/m at 25℃, which shows the detonation velocity increases with the increase of the explosive charge. The Nonel is penetrated when the explosive charge is up to 21.90 mg/m, and the sensitivity and reliability of detonation is accepted even the explosive charge decreases to 13.64 mg/m.

参考文献/References:

［1］陈嘉琨,范钦文,高耀林.塑料导爆管［M］.北京:国防工业出版社,1987.［2］刘自铴,蒋荣光.工业火工品［M］.北京:兵器工业出版社,2003.［3］何中其，彭金华，刘大斌，等.导爆管传爆性能设计与参数分析［J］.爆破器材，2010,39(3):1-3.［4］侯建华.特殊使用条件下提高导爆管传爆可靠性研究［D］.南京：南京理工大学，2004.［5］国防科学技术工业委员会.WJ/T2019-2004塑料导爆管［S］.北京:兵器工业标准化研究所,2004.

相似文献/References:

[1]郑思友,翟廷海.工业雷管可靠起爆塑料导爆管试验研究[J].爆破器材,2010,39(02):29.
　ZHENG Siyou,Experimental Study on Detonating Plastic Nonel Tube Reliably by Industrial Detonator[J].EXPLOSIVE MATERIALS,2010,39(05):29.
[2]徐平,唐书升.塑料导爆管生产安全性探讨[J].爆破器材,2010,39(03):25.
　XU Ping,Tang Shusheng.Discussion on the Safety in Production of Nonel Tube[J].EXPLOSIVE MATERIALS,2010,39(05):25.
[3]段红珍①②,钱华①,万方①,等.示踪剂的添加对导爆管传爆性能的影响[J].爆破器材,2012,41(02):5.
　DUAN Hongzhen,QIAN Hua,WAN Fang,et al.Influence of the Indicator on Detonation Transmission Performance of the Shockconducting Tube[J].EXPLOSIVE MATERIALS,2012,41(05):5.
[4]于国欣,王娟.过程质量控制在导爆索生产中的应用[J].爆破器材,2012,41(02):24.
　YU Guoxin,WANG Juan.Application of Process Quality Control in Detonating Cord Production[J].EXPLOSIVE MATERIALS,2012,41(05):24.
[5]段红珍①②,钱华①③,万方①,等.导爆管的示踪剂溯源方法研究[J].爆破器材,2012,41(04):12.
　DUAN Hongzhen,QIAN Hua,WAN Fang,et al.Tracing Source Technology for Shockconducting Tube[J].EXPLOSIVE MATERIALS,2012,41(05):12.
[6]侯建华①,鲍国钢②,朱长江②.导爆管长度对导爆管雷管延期时间的影响[J].爆破器材,2014,43(05):35.[doi:10.3969/j.issn.1001-8352.2014.05.008]
　HOU Jianhua,BAO Guogang,ZHU Changjiang.Effect of the Length of Detonating Tube on the Delay Time of Nonel Detonator[J].EXPLOSIVE MATERIALS,2014,43(05):35.[doi:10.3969/j.issn.1001-8352.2014.05.008]
[7]史长根,尤峻.双立式爆炸焊接新方法[J].爆破器材,2008,37(03):28.
　Shi Changgen,You Jun.New Technology of Double Vertical Explosive Welding[J].EXPLOSIVE MATERIALS,2008,37(05):28.
[8]孟丽娟①②,颜事龙①,丹慧勇②,等.一种新型燃爆药剂的研究[J].爆破器材,2015,44(05):35.[doi:10.3969/j.issn.1001-8352.2015.05.009]
　MENG Lijuan,YAN Shilong,DAN Huiyong,et al.Research on a New Burning and Explosion Composition[J].EXPLOSIVE MATERIALS,2015,44(05):35.[doi:10.3969/j.issn.1001-8352.2015.05.009]
[9]张文平.某火帽发火可靠性的影响因素[J].爆破器材,2017,46(05):52.[doi:10.3969/j.issn.1001-8352.2017.05.011]
　ZHANG Wenping.Influencing Factors of Ignition Reliability of a Detonating Cap[J].EXPLOSIVE MATERIALS,2017,46(05):52.[doi:10.3969/j.issn.1001-8352.2017.05.011]
[10]吕莎莎①,王海亮①,王万仁②,等.基于高速摄像的导爆管传爆过程研究[J].爆破器材,2020,49(01):40.[doi:10.3969/j.issn.1001-8352.2020.01.008]
　L Shasha,WANG Hailiang,WANG Wanren,et al.Research on Detonating Process of Nonel Tube by High Speed Camera[J].EXPLOSIVE MATERIALS,2020,49(05):40.[doi:10.3969/j.issn.1001-8352.2020.01.008]

备注/Memo

备注/Memo:
收稿日期：2010-05-26 作者简介：荆术祥（1985~），男，硕士在读，从事安全技术及民用爆破器材测试相关研究通讯联系人：刘大斌（1963~），男，研究员，主要从事含能材料制造与应用研究。
更新日期/Last Update: 2011-04-07