[1]郭红军,石健,王宝兴,等.影响大孔径粉末药型罩性能的几个主要因素[J].爆破器材,2010,39(02):35-37.
　GUO hongjun,SHI Jian,WANG Baoxing,et al.Disscussion on Major Factors Affecting Performances of Bighole Powder Liner[J].EXPLOSIVE MATERIALS,2010,39(02):35-37.
点击复制

影响大孔径粉末药型罩性能的几个主要因素()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
39
期数:
2010年02
页码:
35-37
栏目:
安全与测试
出版日期:
2010-04-20

文章信息/Info

Title:
Disscussion on Major Factors Affecting Performances of Bighole Powder Liner
文章编号:
4237
作者:
郭红军; 石健; 王宝兴; 李森元; 郭惊雷; 高强
(中国兵器工业204研究所，陕西西安710065)
Author(s):
GUO hongjun;  SHI Jian;  WANG Baoxing;  LI Senyuan;  GUO Jinglei;  GAO Qiang
Xi’an Modern Chemistry Research Institute (Shanxi Xi’an, 710065)
关键词:
粉末药型罩; 影响因素; 穿孔深度; 穿孔孔径
Keywords:
powder liner;  affecting factors;  depth of penetration;  caliber of penetration
分类号:
TJ413.+7
文献标志码:
A
摘要:
与高穿深粉末药型罩相比，大孔径粉末药型罩的研究相对较少，设计和试验难度相对较大。文章通过混凝土靶试验，对大孔径粉末药型罩研制过程中的几个主要因素进行分析，研究表明影响大孔径粉末药型罩的主要因素是基本结构、成分与颗粒级配以及药型罩成型工艺，通过控制调整这些主要因素，可以改善大孔径粉末罩的性能，达到设计要求。
Abstract:
In comparison to powder line used in highdepth penetration perforation charge, a little attention was addressed to powder line used in the big-hole penetration perforation charge for its difficulties of designing and testing. In this paper, major factors which affect performances of powder lines were systematically studied through the penetration test against concrete target, the testing results show: the performance of powder line is affected by its structure designing, composition, proper powder arrangement, and line’s forming technique; the performance of line could be optimized to meet the design demand by adjusting above major factors.

参考文献/References:

［1］隋树元，王树山,等.终点效应学［M］.北京:国防工业出版社，2000.233~245，274~275.［2］黄培云.粉末冶金原理［M］.北京：冶金工业出版社，2004.124.

相似文献/References:

[1]杨民刚.试论乳化机的乳化效果与安全性[J].爆破器材,2010,39(02):26.
　YANG Mingang.The Discussion on Emulsifying Effectiveness and Safety of Emulsion Machine[J].EXPLOSIVE MATERIALS,2010,39(02):26.
[2]张子敏①,许碧英①,阎峰②,等.活性金属药型罩射孔弹破甲试验研究[J].爆破器材,2013,42(04):53.[doi:10.3969/j.issn.1001-8352.2013.04.013]
　ZHANG Zimin,XU Biying,YAN Feng,et al.Penetrating Test of Active Metal Charge Liner Perforating Bullet[J].EXPLOSIVE MATERIALS,2013,42(02):53.[doi:10.3969/j.issn.1001-8352.2013.04.013]
[3]吴焕龙.装药与药型罩分离对射孔弹穿深影响的规律研究[J].爆破器材,2014,43(01):38.[doi:10.3969/j.issn.1001-8352.2014.01.008]
　WU Huanlong.Law Study on the Influence of Charging and Liner Separation to Penetration Depth of Perforating Charge[J].EXPLOSIVE MATERIALS,2014,43(02):38.[doi:10.3969/j.issn.1001-8352.2014.01.008]
[4]赵云涛,周明,徐文新,等.药型罩轴向密实度分布对射孔弹性能的影响研究[J].爆破器材,2015,44(03):55.[doi:10.3969/j.issn.1001-8352.2015.03.013]
　ZHAO Yuntao,ZHOU Ming,XU Wenxin,et al.Effect of the Axial Compactness Distribution of Lineron Performance of Perforating Charge[J].EXPLOSIVE MATERIALS,2015,44(02):55.[doi:10.3969/j.issn.1001-8352.2015.03.013]
[5]周敬,杨丽侠,张邹邹,等.高能发射药动态力学强度的影响因素研究[J].爆破器材,2016,45(02):29.[doi:10.3969/j.issn.1001-8352.2016.02.007]
　ZHOU Jing,YANG Lixia,ZHANG Zouzou,et al.Study on the Influence Factors of Dynamic Mechanical Properties of Highenergy Gun Propellant[J].EXPLOSIVE MATERIALS,2016,45(02):29.[doi:10.3969/j.issn.1001-8352.2016.02.007]
[6]葛梦珠,黄寅生,王俊杰,等.S型气溶胶灭火剂灭火时间的影响因素研究[J].爆破器材,2017,46(01):41.[doi:10.3969/j.issn.1001-8352.2017.01.009]
　GE Mengzhu,HUANG Yinsheng,WANG Junjie,et al.Influencing Factors for Extinguishing Time of S Type Aerosol Fire Extinguishing Agent[J].EXPLOSIVE MATERIALS,2017,46(02):41.[doi:10.3969/j.issn.1001-8352.2017.01.009]

备注/Memo

备注/Memo:
收稿日期：2009-10-23 作者简介：郭红军（1968~），男，高级工程师。从事爆炸与射孔技术专业。
更新日期/Last Update: 2011-03-28