[1]秦军,徐全军,钟明寿,等.聚能装药爆炸噪声控制装置试验研究[J].爆破器材,2010,39(01):21-23.
　QIN Jun,XU Quanjun,ZHONG Mingshou,et al.Experimental Research on Explosion Noise Control of Shaped Charge[J].EXPLOSIVE MATERIALS,2010,39(01):21-23.
点击复制

聚能装药爆炸噪声控制装置试验研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
39
期数:
2010年01
页码:
21-23
栏目:
安全与测试
出版日期:
2010-02-20

文章信息/Info

Title:
Experimental Research on Explosion Noise Control of Shaped Charge
文章编号:
4206
作者:
秦军; 徐全军; 钟明寿; 李兴华
（解放军理工大学工程兵工程学院，江苏南京210007）
Author(s):
QIN Jun; XU Quanjun;  ZHONG Mingshou;  LI Xinghua
Engineering Institute of Engineer Corps, PLA University of Science & Technology (Jiangsu Nanjing, 210007)
关键词:
聚能装药; 爆炸噪声; 噪声控制; 降噪
Keywords:
shaped charge;  explosion noise;  noise control;  noise elimination
分类号:
TG156 X839.1
文献标志码:
A
摘要:
为了研究不同结构的噪声控制装置对聚能装药爆炸的噪声控制效果，设计两种爆炸噪声控制装置，对两种装置进行试验研究。试验表明，封闭式噪声控制结构的噪声控制效果明显优于开孔式噪声控制结构，降噪量平均值分别为22.6%、17.9%，而且两种装置均穿透了40.0 mm厚均质45#钢靶板，对聚能装药的侵彻深度几乎没有影响。
Abstract:
Two kinds of noise control equipments were designed and carried out to investigate the noise control impact of two different configurations. It is proved that the noise control impact of the closed noise control equipment is better than that of the open noise control equipment. Their average quanta of noise elimination were 22.6% and 17.9% respectively, and both the shaped charge jets penetrate through 40.0 mm thick 45# steel isotropic target.

参考文献/References:

［1］董永香，黄晨光，段祝平. 多层介质对应力波传播特性影响分析［J］.高压物理学报，2005,19(1):59~65.［2］王海福，冯顺山. 爆炸载荷下聚氨酯泡沫材料中冲击波压力特性［J］.爆炸与冲击，1999,19(1):78~83. ［3］马大猷,沈豪.声学手册［M］.第2版.北京:科学出版社, 2004.［4］王永刚,胡时胜,王礼立.爆炸载荷下泡沫材料中冲击波衰减特性的实验和数值模拟研究［J］.爆炸与冲击, 2003,23(6):516~522.［5］徐全军,唐丙文,李裕春.聚氨酯泡沫材料的隔爆作用［J］.解放军理工大学学报(自然科学版), 2007,8(1):77~81.

相似文献/References:

[1]周方毅,詹发民,张可玉,等.一种水下聚能破礁装置研究[J].爆破器材,2009,38(01):23.
　ZHOU Fangyi,ZHAN Famin,ZHANG Keyu,et al.Study on an Underwater Cumulative Reef-breaker[J].EXPLOSIVE MATERIALS,2009,38(01):23.
[2]贾伟①②,吴国东①,王志军①,等.药型罩结构对环形爆炸成型弹丸形成的影响[J].爆破器材,2011,40(06):8.
　JIA Wei,WU Guodong,WANG Zhijun,et al.Influence of Liner Structure on Forming Process of Annular EFP[J].EXPLOSIVE MATERIALS,2011,40(01):8.
[3]郭帅①,李小军②,于小洁③,等.双层药型罩内罩开槽对EFP形成尾翼的影响[J].爆破器材,2014,43(06):11.[doi:10.3969/j.issn.1001-8352.2014.06.003]
　GUO Shuai,LI Xiaojun,YU Xiaojie,et al.Influence of Inner Liner with Grooves of Doublelayer Liners on the Formation of EFP with Fins[J].EXPLOSIVE MATERIALS,2014,43(01):11.[doi:10.3969/j.issn.1001-8352.2014.06.003]
[4]李金明,丁玉奎,可勇.利用聚能原理销毁危险弹药的试验方法[J].爆破器材,2008,37(03):37.
　Li Jinming,Ding Yukui,Ke Yong.The Test Method of Disposing Danger Ammuniti on by Using Gather Energy Theory[J].EXPLOSIVE MATERIALS,2008,37(01):37.
[5]薛震,陈智刚,侯秀成,等.带偏角环形聚能装药射流汇聚性能研究[J].爆破器材,2015,44(04):55.[doi:10.3969/j.issn.1001-8352.2015.04.013]
　XUE Zhen,CHEN Zhigang,HOU Xiucheng,et al.Aggregation Performance of the Jet of Annular Shaped Charge with Offset Angle[J].EXPLOSIVE MATERIALS,2015,44(01):55.[doi:10.3969/j.issn.1001-8352.2015.04.013]
[6]张钧①,陈智刚①,李小军②,等.变壁厚球缺罩杆式射流的形成与侵彻性能研究[J].爆破器材,2016,45(01):39.[doi:10.3969/j.issn.1001-8352.2016.01.009]
　ZHANG Jun,CHEN Zhigang,LI Xiaojun,et al.Formation and Penetration Performances of Jetting Penetrator Charge of Hemispherical Liners with Variable Thickness[J].EXPLOSIVE MATERIALS,2016,45(01):39.[doi:10.3969/j.issn.1001-8352.2016.01.009]
[7]伊建亚①,王志军①,尹建平①,等.复合双药型罩结构冲击ERA及其后效作用研究[J].爆破器材,2017,46(03):45.[doi:10.3969/j.issn.1001-8352.2017.03.009]
　YI Jianya,WANG Zhijun,YIN Jianping,et al.Composite Double Liner Impacting ERA and Its Aftermath[J].EXPLOSIVE MATERIALS,2017,46(01):45.[doi:10.3969/j.issn.1001-8352.2017.03.009]
[8]王维占,赵太勇,陈智刚,等.不同材料双层球缺罩侵彻特性的研究[J].爆破器材,2017,46(05):43.[doi:10.3969/j.issn.1001-8352.2017.05.009]
　WANG Weizhan,ZHAO Taiyong,CHEN Zhigang,et al.Penetration Characteristics of Double-layer Hemispherical Liner Made of Different Materials[J].EXPLOSIVE MATERIALS,2017,46(01):43.[doi:10.3969/j.issn.1001-8352.2017.05.009]
[9]郭光全①,郭子云①,雷文星②,等.大开孔聚能装药威力性能研究[J].爆破器材,2018,47(05):49.[doi:10.3969/j.issn.1001-8352.2018.05.009]
　GUO Guangquan,GUO Ziyun,LEI Wenxing,et al.Study on Power Performance of Shaped Charge with Large Opening[J].EXPLOSIVE MATERIALS,2018,47(01):49.[doi:10.3969/j.issn.1001-8352.2018.05.009]
[10]黄松,尹建平,张斐,等.起爆方式对双模串联毁伤元成型及侵彻性能影响的数值模拟[J].爆破器材,2018,47(06):43.[doi:10.3969/j.issn.1001-8352.2018.06.008]
　HUANG Song,YIN Jianping,ZHANG Fei,et al.Numerical Simulation of Effect of Initiation Methods on Formation and Penetration Performance of Two Tandem Damage Elements[J].EXPLOSIVE MATERIALS,2018,47(01):43.[doi:10.3969/j.issn.1001-8352.2018.06.008]

备注/Memo

备注/Memo:
收稿日期：2009-06-09作者简介：秦军（1983~），男，硕士研究生，主要从事地雷与爆破器材应用研究。
更新日期/Last Update: 2011-03-24