[1]姜爱华,焦宁,王高,等.新型高精度多段光纤爆速仪的设计[J].爆破器材,2013,42(06):29-31.[doi:10.3969/j.issn.1001-8352.2013.06.006]
 JANG Aihua,JIAO Ning,WANG Gao,et al.Design of a New Highprecision Multiple Fiber Optical Detonation Velocity Meter[J].EXPLOSIVE MATERIALS,2013,42(06):29-31.[doi:10.3969/j.issn.1001-8352.2013.06.006]
点击复制

新型高精度多段光纤爆速仪的设计()
分享到:

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
42
期数:
2013年06
页码:
29-31
栏目:
爆破技术
出版日期:
2013-12-20

文章信息/Info

Title:
Design of a New Highprecision Multiple Fiber Optical Detonation Velocity Meter
文章编号:
4656
作者:
姜爱华焦宁王高李仰军刘丽双
中北大学仪器科学与动态测试教育部重点实验室(山西太原,030051)
Author(s):
JANG Aihua JIAO Ning WANG Gao LI Yangjun LIU Lishuang
Key Laboratory of Instrumentation Science and Dynamic Measurement of Ministry of Education, North University of China (Shanxi Taiyuan, 030051)
关键词:
多段爆速光纤FPGA高精度
Keywords:
multiple detonation velocity fiber optical FPGA high precision
分类号:
TD235.2+2
DOI:
10.3969/j.issn.1001-8352.2013.06.006
文献标志码:
A
摘要:
为了提高炸药的性能,设计一种新型高精度多段爆速仪,以光纤作为传感器采集爆炸信号,通过峰值电压采样保持电路,保证了光纤获取爆炸信号波形峰值间的计时,并由FPGA进行数据处理,提高了系统的测试精度和稳定性,简化了电路设计和调试。文中对峰值电压采样保持电路、光电转换部分电路进行了详细的设计,并结合实验和误差对比分析系统的精度,结果表明本系统在精度上有很大的提高。
Abstract:
In order to improve the performance of dynamite, a new high-precision multiple detonation velocity meter was designed. Fiber optical was used as the detonator signals received by the transducer. By peak voltage sample-holding circuit, the time between wave peaks of detonator signals obtained from fiber optical was identified, and the data were processed by FPGA. By this means, the test accuracy and stability of the system were improved, and the circuit design and debugging were simplified. In this paper, peak voltage samplehold circuit and photoelectric conversion circuit were designed in detail. The precision of the system was comparatively analyzed combining with experiments and error. The results show that the system ensures a great improvement in accuracy.

参考文献/References:

[1]王星河.光纤爆速仪在导爆索爆速测试中的应用[J].爆破器材,2011,40(6):27-28.
 Wang Xinghe.Application of fiber optical detonation velocity meter in the detonation  velocity measurement of detonating cord[J].Explosive Materials,2011,40(6):27-28.
[2]Rodriguez G,Sandberg R L, McCulloch Q,et al.Chirped fiber bragg grating detonation velocity sensing[J]. Review of Scientific Instruments,2013,84(1):015003-015012.
[3]Lebedev V B,Feldman G G , Karpov M A, et al. Application of K008 camera in diagnostics of shock and deto nation waves[J]. Measurement Techniques,2007,50(5):524-528.
[4]丁建宏,周广来,赵晓东.单片机在测试炸药爆速中的应用[J].爆破器材,1998,27(2):1-3.
Ding Jianhong,Zhou Guanglai,Zhao Xiaodong. Application of microprocessor to the measurement of detonation velocity[J]. Explosive Materials,1998,27(2):1-3.
[5]高志强,王高,魏林,等.新型光纤爆速仪的设计与应用[J].火工品,2011(3):43-45.
Gao Zhiqiang,Wang Gao,Wei Lin, et al. Design and application of a new fiber detonation velocity meter [J]. Initiators & Pyrotechnics,2011(3):43-45.
[6]高志强.基于FPGA的新型单段光纤爆速仪设计[D].太原:中北大学,2011.
Gao Zhiqiang.Design of a new single fiber detonation velocity meter based FPGA[D].Taiyuan:North University of China,2011.
[7]顾泽慧,高见.基于CPLD的多通道智能爆速仪的设计[J].工业控制计算机,2011,24(10):106-107.
Gu Zehui,Gao Jian. Multichannel intelligence explosive rate instrument of based on CPLD [J].Industrial Control Computer,2011,24(10):106-107.

备注/Memo

备注/Memo:
收稿日期:2013-06-05
作者简介:姜爱华(1987~),女,硕士研究生,主要研究方向:光电检测。
更新日期/Last Update: 2014-01-06