[1]冯海林,胡毅亭,侯海周.酚醛层压材料的本构模型研究[J].爆破器材,2013,42(02):14-16.[doi:10.3969/j.issn.1001-8352.2013.02.004]
　FENG Hailin,HU Yiting,HOU Haizhou.Study on Constitutive Model of Phenolic Cotton Fabric Material[J].EXPLOSIVE MATERIALS,2013,42(02):14-16.[doi:10.3969/j.issn.1001-8352.2013.02.004]
点击复制

酚醛层压材料的本构模型研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
42
期数:
2013年02
页码:
14-16
栏目:
基础理论
出版日期:
2013-04-20

文章信息/Info

Title:
Study on Constitutive Model of Phenolic Cotton Fabric Material
文章编号:
4579
作者:
冯海林; 胡毅亭; 侯海周
南京理工大学化工学院（江苏南京，210094）
Author(s):
FENG Hailin; HU Yiting; HOU Haizhou
School of Chemical Engineering, Nanjing University of Science and Technology (Jiangsu Nanjing, 210094)
关键词:
酚醛层压材料; 分离式Hopkinson压杆; 高应变率; 本构模型; 最小二乘法
Keywords:
phenolic cotton fabric material;  split Hopkinson pressure bar;  high strain rate;  constitutive model;  least square method
分类号:
TQ560.7 TD235.2+2
DOI:
10.3969/j.issn.1001-8352.2013.02.004
文献标志码:
A
摘要:
文中讨论了雷管生产线中使用的酚醛层压材料的本构模型，使用分离式Hopkinson压杆（SHPB）研究了材料在高应变率下的力学行为。通过对实验结果的分析，材料的动态应力—应变曲线符合ZWT（朱王唐）非线性热弹粘性本构模型。利用最小二乘法拟合了方程参数，同时对拟合的理论结果与实验结果进行比较，发现在低应变区，拟合并不很好，试件内存在应力应变分布不均的影响因素；在高应变区，拟合与实验结果比较吻合。
Abstract:
The constitutive model of phenolic cotton fabric material which is used in the detonator production lines was discussed and its dynamic behaviors were studied at high strain rates by using the split Hopkinson pressure bar in present study. Experimental data analysis shows that its dynamic strainstress curves are consistent with ZWT (Zhu-Wang-Tang) non-linear visco-elastic constitutive model. ZWT equation parameters were obtained by the least square method. In comparison with the experimental results, the fitted theoretical results are not so good at low strain rates due to the existence of uneven stress and strain distribution within the test specimens but quite well at high strain rates.

参考文献/References:

［1］胡时胜.霍普金森压杆技术［J］.兵器材料科学与工程, 1991,14（11）：42-49．
Hu Shisheng. Technology of Hopkinson pressure bar［J］. Ordnance Material Science and Engineering, 1991,14（11）：42-49．
［2］Niu Xiaoyan, Yuan Gouzheng, Shu Xuefeng. Study on dynamic failure model of leadfree solders using SHPB techniques［J］. International Journal of Modern Physics B, 2008, 22:1117-1122.
［3］王礼立.应力波基础［M］.2版.北京：国防工业出版社, 2005:52-60．
［4］Ninan L, Tsai J, Sun C T. Use of split Hhopkinson pressure bar for testing offaxis composites［J］. International Journal of Impact Engineering, 2001, 25 (3):291-313．
［5］黄德进,孙紫建,王礼立.高聚物材料动态本构关系对PP/PA共混物的应用研究［J］.材料工程,2006(3):3-5．
 Huang Dejin,Sun Zijian,Wang Lili. Study on PP/PA blended material by polymer dynamic constitutive relation［J］.Journal of Material Engineering,2006(3):3-5.
［6］Sabuwala T,Linzell D, Krauthammer T. Finite element analysis of steel beam to column connections subjected to blast loads［J］. International Journal of Impact Engineering, 2005, 31(7): 861-876.
［7］王礼立，施绍裘，陈江瑛，等.ZWT非线性热粘弹性本构关系的研究与应用［J］.宁波大学学报：理工版, 2002,15(3): 141-149．
 Wang Lili, Shi Shaoqiu,Chen Jingyin, et al. Research and Apply of ZWT nonlinear viscoelastic constitutive model［J］. Journal of Ningbo University:NSEE, 2002,15(3): 141-149．
［8］Limbert G, Middleton J. A constitutive model of the posterior cruciate ligament［J］. Medical Engineering and Physics, 2006, 28(2): 99-113. 

备注/Memo

备注/Memo:
收稿日期：2012-12-10
作者简介：冯海林（1988~），男，硕士研究生，主要从事爆炸安全方面的研究。
通信作者：胡毅亭（1973~），男，讲师，主要从事安全技术评价方面的研究。
更新日期/Last Update: 2013-04-27