[1]袁玉红①②,张胜③,韩保良④,等.基于PSpice软件的半导体桥换能元电爆特性的模拟仿真[J].爆破器材,2023,52(06):22-26,33.[doi:10.3969/j.issn.1001-8352.2023.06.004]
　YUAN Yuhong,ZHANG Sheng,HAN Baoliang,et al.Simulation of the Electro-Explosive Characteristics of Semiconductor Bridge Exchange Elements Based on PSpice Software[J].EXPLOSIVE MATERIALS,2023,52(06):22-26,33.[doi:10.3969/j.issn.1001-8352.2023.06.004]
点击复制

基于PSpice软件的半导体桥换能元电爆特性的模拟仿真()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
52
期数:
2023年06
页码:
22-26,33
栏目:
爆炸材料
出版日期:
2023-12-05

文章信息/Info

Title:
Simulation of the Electro-Explosive Characteristics of Semiconductor Bridge Exchange Elements Based on PSpice Software
文章编号:
5853
作者:
袁玉红①②; 张胜③; 韩保良④; 周彬①; 黄寅生①
①南京理工大学化学与化工学院（江苏南京，210094）?
②安徽红星机电科技股份有限公司（安徽合肥，231135)
③安徽军工集团控股有限公司(安徽合肥，231135)?
④陆军装备部驻合肥地区军事代表室（安徽合肥，231135）
Author(s):
YUAN Yuhong①②;  ZHANG Sheng③;  HAN Baoliang④;  ZHOU Bin①;  HUANG Yinsheng①
①School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology (Jiangsu Nanjing, 210094)
②Anhui Hongxing Electrical Polytron Technologies Co., Ltd. (Anhui Hefei, 231135）
③Anhui Military Industry Group Holding Co., Ltd. (Anhui Hefei, 231135)
④Military Representative Office in Hefei Region, Army Equipment Department (Anhui Hefei, 231135)
关键词:
半导体桥; 火工品; 电爆特性
Keywords:
semiconductor bridge;  initiator;  electro-explosive characteristic
分类号:
TJ45
DOI:
10.3969/j.issn.1001-8352.2023.06.004
文献标志码:
A
摘要:
将电路仿真软件用于半导体桥火工品的电磁兼容性设计时，仿真准确程度取决于发火电路和半导体桥器件模型的精度。通过在电路软件中建立电容放电发火电路和半导体桥火工品电子器件模型来实现半导体桥的电爆过程仿真。研究结果表明：在电容放电发火仿真电路中，当回路电感为0.62 μH、回路电阻为3.3 mΩ时，仿真电路可用于模拟实际电容放电发火电路;对比半导体桥火工品爆发过程的仿真和试验结果发现，子电路建模方法建立的半导体桥器件模型能够有效模拟出半导体桥的电爆特性曲线，且模拟电爆参数均在误差范围内。
Abstract:
When circuit simulation software is used for the electromagnetic compatibility design of the semiconductor bridge (SCB) initiator, the accuracy of the simulation depends on the accuracy of the firing circuit and semiconductor bridge device model. A capacitor discharge ignition circuit and a SCB initiator electronic device model were established in the circuit software to achieve the simulation of the electro-explosive process of the SCB initiator. The results show that, in the simulation circuit of capacitor discharge and ignition, when the circuit inductance is 0.62 μH and the circuit resistance is 3.3 mΩ, the simulation circuit can be used to simulate the actual capacitor discharge and ignition. After comparing the simulation and experimental results of the explosion process of SCB initiator, it is found that the SCB initiator model established by the subcircuit modeling method can effectively simulate the electro-explosive characteristic curve of the SCB, and the simulated electro-explosive data are all within the error range.

参考文献/References:

［1］王凯民. 火工品工程［M］. 北京:国防工业出版社, 2014.
［2］李志鹏, 张攀军, 吕子剑, 等. 爆炸桥丝火工品的高压静电放电响应 ［J］. 含能材料, 2015, 23(6): 578-582.
LI Z P, ZHANG P J, Lǔ Z J, et al. Response to high voltage electrostatic discharge for exploding bridgewire detonators ［J］.Chinese Journal of Energetic Materials, 2015, 23(6): 578-582.
［3］BENSON D A, LARSEN M D, RENLUND A M, et al. Semiconductor bridge: a plasma generator for the ignition of explosives ［J］. Journal of Applied Physics, 1987, 62(5): 1622-1632.
［4］王大为.半导体桥火工品静电损伤规律及理论模拟［D］. 南京: 南京理工大学, 2013.
WANG D W. The semiconductor bridge initiators electrostatic damage and theoretical modeling［D］. Nanjing:Nanjing University of Science and Technology, 2013.
［5］任钢. 半导体桥火工品电磁兼容技术研究 ［D］. 南京: 南京理工大学, 2012.
REN G. Research on the electromagnetic compatibility of semiconductor bridg ［D］. Nanjing: Nanjing University of Science and Technology, 2012.
［6］杜培康, 谭明, 李勇, 等. 压敏电阻对半导体桥火工品电爆性能的影响［J］. 含能材料, 2015, 23(8): 781-786.
DU P K, TAN M, LI Y, et al. Electro-explosive performances of SCB igniter with varistor ［J］. Chinese Journal of Energetic Materials, 2015, 23(8): 781-786.
［7］陈飞. SCB火工品静电、射频损伤机理及其加固技术的研究［D］. 南京: 南京理工大学, 2012.
CHEN F. Research on the damage mechanism and reinforcement technology of electrostatic and RF on SCB explosive devices ［D］. Nanjing: Nanjing University of Science and Technology, 2012.
［8］于鸿源, 严楠, 陈树肖. 基于电路仿真的桥丝式电火工品静电危害预测［J］. 含能材料, 2015, 23(7): 682-687.
YU H Y，YAN N，CHEN S X，et al. Electrostatic hazard prediction of bridge wire electro explosive device based on the circuit simulation ［J］. Chinese Journal of Energetic Materials, 2015, 23(7): 682-687.
［9］赵佳. 半导体桥火工品静电响应特性及其静电防护研究［D］. 南京: 南京理工大学, 2014.
ZHAO J. Research on the response characteristic and protection to ESD of semiconductor bridge ［D］. Nanjing: Nanjing University of Science and Technology, 2014.
［10］WEINLEIN J, SANCHEZ D, SALAS J. Electrostatic discharge (ESD) protection for a laser diode ignited actuator: ASND2003-2100 ［R］. Albuquerque, NM, US: Sandia National Laboratorys, 2003.
［11］KING T L, TARBELL W W. Pin-to-pin electrostatic discharge protection for semiconductor bridges: SAND2002-2213 ［R］. Albuquerque, NM, US: Sandia National Laboratorys, 2002.
［12］MARX K D, BICKES R W, JR WACKERBARTH D E. Characterization and electrical modeling of semiconductor bridges: SAND-97-8246 ［R］. Albuquerque, NM, US: Sandia National Laboratorys, 1997.
［13］FURNBERG C M. Computer modeling of detonators［C］//Proceedings of the 37th Midwest Symposium on Circuits and Systems. Lafayette, LA, US, 1994: 646-649.
［14］杜培康. 压敏电阻用于SCB火工品电磁防护研究［D］.南京: 南京理工大学, 2013.
DU P K. Electromagnetic compatibility research of varistor used for SCB initiating explosive devices［D］. Nanjing: Nanjing University of Science and Technology, 2013.
［15］贾昕. Al/CuO复合半导体桥设计及发火性能研究［D］. 南京: 南京理工大学, 2014.
JIA X. Study on design and explosive characteristics of Al/CuO composite SCB ［D］. Nanjing: Nanjing University of Science and Technology, 2014.

相似文献/References:

[1]左成林,周彬,杜伟强.TVS二极管用于半导体桥静电安全性研究[J].爆破器材,2016,45(03):62.[doi:10.3969/j.issn.1001-8352.2016.03.013]
　ZUO Chenglin,ZHOU Bin,DU Weiqiang.Electrostatic Safety of Semiconductor Bridge with External TVS Diodes[J].EXPLOSIVE MATERIALS,2016,45(06):62.[doi:10.3969/j.issn.1001-8352.2016.03.013]
[2]赵团,姚洪志,纪向飞,等.火工品高频段射频阻抗测试技术[J].爆破器材,2016,45(04):61.[doi:10.3969/j.issn.1001-8352.2016.04.013]
　ZHAO Tuan,YAO Hongzhi,JI Xiangfei,et al.Test Technique of RF Impedance of EED in High Frequency[J].EXPLOSIVE MATERIALS,2016,45(06):61.[doi:10.3969/j.issn.1001-8352.2016.04.013]
[3]刘德虎①,周彬②,左成林②.压敏电阻用于SCB火工品静电安全性研究[J].爆破器材,2016,45(05):62.[doi:10.3969/j.issn.1001-8352.2016.05.013]
　LIU Dehu,ZHOU Bin,ZUO Chenglin.Research on the Electrostatic Safety of Semiconductor Bridge(SCB) Explosive Device with Varistor[J].EXPLOSIVE MATERIALS,2016,45(06):62.[doi:10.3969/j.issn.1001-8352.2016.05.013]
[4]黄亦斌,周彬,王军.肖特基二极管防护后SCB静电安全性研究[J].爆破器材,2019,48(03):29.[doi:10.3969/j.issn.1001-8352.2019.03.006]
　HUANG Yibin,ZHOU Bin,WANG Jun.Research on the Electrostatic Security of SCB with Schottky Barrier Diodes[J].EXPLOSIVE MATERIALS,2019,48(06):29.[doi:10.3969/j.issn.1001-8352.2019.03.006]
[5]董军①②,杜茂华①,王晓峰②,等.3D打印技术在火工品和炸药中的应用研究[J].爆破器材,2021,50(04):1.[doi:10.3969/j.issn.1001-8352.2021.04.001]
　DONG Jun,DU Maohua,WANG Xiaofeng,et al.Application of 3D Printing Technology in Pyrotechnics and Explosives[J].EXPLOSIVE MATERIALS,2021,50(06):1.[doi:10.3969/j.issn.1001-8352.2021.04.001]
[6]史安然①②③,周宇轩①②③,沈云④,等.基于Cu阻挡层的Al/CuO含能半导体桥的电爆性能研究[J].爆破器材,2022,51(05):1.[doi:10.3969/j.issn.1001-8352.2022.05.001]
　SHI Anran,ZHOU Yuxuan,SHEN Yun,et al.Electric Explosion Performance of Al/CuO Energetic Semiconductor Bridge Based on Cu Barrier Layer[J].EXPLOSIVE MATERIALS,2022,51(06):1.[doi:10.3969/j.issn.1001-8352.2022.05.001]
[7]丁跃伟,赵洪海,程涛,等.引爆装置长期储存失效研究[J].爆破器材,2023,52(01):30.[doi:10.3969/j.issn.1001-8352.2023.01.005]
　DING Yuewei,ZHAO Honghai,CHENG Tao,et al.Study on Failure of an Initiating Device in Long-Time Storage[J].EXPLOSIVE MATERIALS,2023,52(06):30.[doi:10.3969/j.issn.1001-8352.2023.01.005]
[8]袁玉红①②,李军福③,周彬①,等.半导体桥火工品的防静电与防射频设计[J].爆破器材,2024,53(01):30.[doi:10.3969/j.issn.1001-8352.2024.01.005]
　YUAN Yuhong,LI Junfu,ZHOU Bin,et al.Anti-Static and Anti-RF Design of the Semiconductor Bridge Initiator[J].EXPLOSIVE MATERIALS,2024,53(06):30.[doi:10.3969/j.issn.1001-8352.2024.01.005]
[9]张文超,张伟,徐振相,等.半导体桥的研究进展与发展趋势[J].爆破器材,2009,38(02):21.
　ZHANG Wenchao,ZHANG Wei,XU Zhenxiang,et al.Progress and Development on Semiconductor Bridge Initiator[J].EXPLOSIVE MATERIALS,2009,38(06):21.

备注/Memo

备注/Memo:
收稿日期：2023-06-11
第一作者：袁玉红（1985-），男，博士研究生，高级工程师，主要从事火工品应用技术的研究。E-mail：28891855@qq.com
通信作者：周彬（1971-），女，副研究员，博导，主要从事新型火工品技术的研究。E-mail：zhoubinnust@126.com
更新日期/Last Update: 2023-12-04