[1]王鑫①,汪海波①,王传兵②,等.锥角参数对单向聚能药柱爆破破岩效果的影响[J].爆破器材,2023,52(03):45-51.[doi:10.3969/j.issn.1001-8352.2023.03.007]
　WANG Xin,WANG Haibo,WANG Chuanbing,et al.Influence of Cone Angle Parameters on the Rock-Breaking by Unidirectional Shaped Charge Blasting[J].EXPLOSIVE MATERIALS,2023,52(03):45-51.[doi:10.3969/j.issn.1001-8352.2023.03.007]
点击复制

锥角参数对单向聚能药柱爆破破岩效果的影响()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
52
期数:
2023年03
页码:
45-51
栏目:
爆破技术
出版日期:
2023-06-06

文章信息/Info

Title:
Influence of Cone Angle Parameters on the Rock-Breaking by Unidirectional Shaped Charge Blasting
文章编号:
5780
作者:
王鑫①; 汪海波①; 王传兵②; 吕闹①; 程兵③; 姜自亮②; 王梦想①
① 安徽理工大学土木建筑学院（安徽淮南，232001）
② 淮南矿业(集团)有限责任公司（安徽淮南，232001）
③ 安徽理工大学化学工程学院（安徽淮南，232001）
Author(s):
WANG Xin①;  WANG Haibo①;  WANG Chuanbing②;  Lǔ Nao①;  CHENG Bing③;  JIANG Ziliang②;  WANG Mengxiang①
①School of Civil Engineering and Architecture, Anhui University of Science and Technology (Anhui Huainan, 232001)
②Huainan Mining Industry (Group) Co., Ltd. (Anhui Huainan, 232001)
③School of Chemical Engineering, Anhui University of Science and Technology (Anhui Huainan, 232001)
关键词:
聚能装药; 裂纹扩展; 损伤比; 锥角
Keywords:
shaped charge;  crack extension;  damage ratio;  cone angle
分类号:
TD235.4
DOI:
10.3969/j.issn.1001-8352.2023.03.007
文献标志码:
A
摘要:
为研究聚能穴锥角参数对爆炸应力和岩石损伤破裂范围的影响，以获得最优的聚能穴参数，从而达到最佳的破岩效果，利用有限元模拟软件LSDYNA建立了6种锥角参数下的单向聚能药柱模型。锥角的深度为15 mm，6种锥角高度分别为10、12、14、16、18 mm和20 mm。研究了岩石裂纹扩展的影响规律，测得聚能方向与非聚能方向上不同位置的有效应力，得到不同锥角参数对应的岩石单元的最大破坏距离。结果表明：聚能锥角会对爆破产生定向作用，特别是对岩石破碎和拉伸裂纹所带来的破岩效果影响明显；当锥角高度为10 mm时，距炮孔25 cm测点处聚能方向上的有效应力比非聚能方向同样距离处高110.8 MPa，同时，聚能方向上单元损伤比要比非聚能方向高21%，聚能效果最佳；随着锥角高度逐渐增大，聚能方向上岩石裂纹逐渐减少，裂纹分叉减少，单元破坏最大距离可达108.1 cm，并且呈下降趋势。
Abstract:
In order to study the influence of cone angle parameters of shaped charge on explosion stress and damage rupture range of rocks, so as to obtain the optimal parameters of shaped charge and achieve the best rock-breaking outcome, finite element simulation software LS-DYNA was used to establish a unidirectional shaped charge column model with six cone angle parameters. The depth of the cone angle is 15 mm, and the opening heights of the six cone angles are 10, 12, 14, 16, 18 mm, and 20 mm, respectively. Influences of cone angles on rock crack propagation were studied. The maximum damage distance of the rock unit corresponding to the different cone angle parameters was obtained by measuring the effective stress at different positions in the direction of energy concentration and non-energy concentration. The results show that the cone angle of the shaped charge will have a directional effect on the blasting. Especially, it has a significant impact on rock-breaking caused by rock fragmentaion and tensile cracks. When the height of the cone angle is 10 mm, the effective force in the direction of energy concentration at a measuring point 25 cm away from the blast hole is 110.8 MPa higher than that at the same distance in the direction of non-energy concentration. At the same time, the damage ratio of the unit on the energy concentration side is 21% higher than that on the non-energy concentration side, and the energy accumulating effect is the best. As the height of the cone angle gradually increases, the cracks on the energy concentration side of the rock gradually decrease, and the bifurcation of the cracks also decreases. The maximum distance of unit damage can reach 108.1 cm, and it shows a downward trend.

参考文献/References:

［1］陈伟, 马宏昊, 沈兆武, 等. 壳体环向聚能致裂器的作用原理与应用研究［J］. 爆破器材, 2015, 44(3): 27-30.
CHEN W, MA H H, SHEN Z W, et al. Mechanism and application study of the shell annular cumulative cracking device ［J］. Explosive Materials, 2015, 44(3): 27-30.
［2］张旭进, 张昌锁, 宋水舟. 基于LSDYNA的聚能装药结构优势数值模拟［J］. 矿业研究与开发, 2019, 39(6): 136-140.
ZHANG X J, ZHANG C S, SONG S Z. Numerical simulation on the advantages of shaped charges structure based on LS-DYNA ［J］. Mining Research and Development, 2019, 39(6): 136-140.
［3］薛震, 陈智刚, 侯秀成, 等. 带偏角环形聚能装药射流汇聚性能研究［J］. 爆破器材, 2015, 44(4): 55-59.
XUE Z, CHEN Z G, HOU X C, et al. Aggregation performance of the jet of annular shaped charge with offset angle ［J］. Explosive Materials, 2015, 44(4): 55-59.
［4］郭德勇, 赵杰超, 朱同功, 等. 双孔聚能爆破煤层裂隙扩展贯通机理［J］. 工程科学学报, 2020, 42(12): 1613-1623.
GUO D Y, ZHAO J C, ZHU T G, et al. Crack propagation and coalescence mechanism of double-hole cumulative blasting in coal seam ［J］. Chinese Journal of Engineering, 2020, 42(12): 1613-1623.
［5］梁洪达, 郭鹏飞, 孙鼎杰, 等. 不同聚能爆破模式应力波传播及裂纹扩展规律研究［J］. 振动与冲击, 2020, 39(4): 157-164, 184.
LIANG H D, GUO P F, SUN D J, et al. A study on crack propagation and stress wave propagation in different blasting modes of shaped energy blasting ［J］. Journal of Vibration and Shock, 2020, 39(4): 157-164, 184.
［6］崔魁文, 米双山, 高敏. 药型罩锥角对聚能杆式侵彻体影响的数值分析［J］. 兵工自动化, 2018, 37(11): 67-71.
CUI K W, MI S S, GAO M. Numerical analysis on effect of jetting projectile charge by liner cone angle ［J］. Ordnance Industry Automation, 2018, 37(11): 67-71.
［7］丁亮亮, 李翔宇, 卢芳云, 等. 聚能射流参数的工程化函数研究［J］. 弹箭与制导学报, 2016, 36(2): 64-67.
DING L L, LI X Y, LU F Y, et al. Study on engineering function of parameters of jet ［J］. Journal of Projectiles Rockets Missiles and Guidance, 2016, 36(2): 64-67.
［8］周方毅, 王伟力, 姜涛, 等. 变锥角聚能装药水中爆炸数值模拟研究［J］. 爆破, 2012, 29(4): 99-102.
ZHOU F Y, WANG W L, JIANG T, et al. Simulation study on metamorphic tapered angle shaped charge under underwater explosion ［J］. Blasting, 2012, 29(4): 99-102.
［9］汪海波, 彭恒, 魏国力, 等. 一种单面切槽爆破药柱壳体: CN106907960B ［P］. 2019-02-12.
［10］王姚姚, 汪海波, 程兵, 等. 巷道掘进药卷与钻孔直径匹配关系对爆破破裂范围的影响［J］. 爆破, 2022, 39(2): 107-113.
WANG Y Y, WANG H B, CHENG B, et al. Influence of matching relationship between explosive cartridge and borehole diameter in roadway excavation on blasting rupture range ［J］. Blasting, 2022, 39(2): 107-113.
［11］时启鹏, 郑洪运, 王永宝, 等. 沿空留巷双向聚能爆破炮孔间距参数研究［J］. 煤矿安全, 2022, 53(1): 219-225.
SHI Q P, ZHENG H Y, WANG Y B, et al. Study on parameters of blast hole spacing for gob side entry retaining by bidirectional shaped charge blasting ［J］. Safety in Coal Mines, 2022, 53(1): 219-225.
［12］BLAIR D P. The free surface influence on blast vibration ［J］. International Journal of Rock Mechanics & Mining Sciences, 2015, 77: 182-191.
［13］CHENG B, WANG H B, ZONG Q, et al. Study of the double wedge cut technique in mediumdepth hole blasting of rock roadways［J］. Arabian Jounal for Science and Engineering, 2021, 46(5): 4895-4909.

相似文献/References:

[1]秦军,徐全军,钟明寿,等.聚能装药爆炸噪声控制装置试验研究[J].爆破器材,2010,39(01):21.
　QIN Jun,XU Quanjun,ZHONG Mingshou,et al.Experimental Research on Explosion Noise Control of Shaped Charge[J].EXPLOSIVE MATERIALS,2010,39(03):21.
[2]周方毅,詹发民,张可玉,等.一种水下聚能破礁装置研究[J].爆破器材,2009,38(01):23.
　ZHOU Fangyi,ZHAN Famin,ZHANG Keyu,et al.Study on an Underwater Cumulative Reef-breaker[J].EXPLOSIVE MATERIALS,2009,38(03):23.
[3]贾伟①②,吴国东①,王志军①,等.药型罩结构对环形爆炸成型弹丸形成的影响[J].爆破器材,2011,40(06):8.
　JIA Wei,WU Guodong,WANG Zhijun,et al.Influence of Liner Structure on Forming Process of Annular EFP[J].EXPLOSIVE MATERIALS,2011,40(03):8.
[4]郭帅①,李小军②,于小洁③,等.双层药型罩内罩开槽对EFP形成尾翼的影响[J].爆破器材,2014,43(06):11.[doi:10.3969/j.issn.1001-8352.2014.06.003]
　GUO Shuai,LI Xiaojun,YU Xiaojie,et al.Influence of Inner Liner with Grooves of Doublelayer Liners on the Formation of EFP with Fins[J].EXPLOSIVE MATERIALS,2014,43(03):11.[doi:10.3969/j.issn.1001-8352.2014.06.003]
[5]李金明,丁玉奎,可勇.利用聚能原理销毁危险弹药的试验方法[J].爆破器材,2008,37(03):37.
　Li Jinming,Ding Yukui,Ke Yong.The Test Method of Disposing Danger Ammuniti on by Using Gather Energy Theory[J].EXPLOSIVE MATERIALS,2008,37(03):37.
[6]薛震,陈智刚,侯秀成,等.带偏角环形聚能装药射流汇聚性能研究[J].爆破器材,2015,44(04):55.[doi:10.3969/j.issn.1001-8352.2015.04.013]
　XUE Zhen,CHEN Zhigang,HOU Xiucheng,et al.Aggregation Performance of the Jet of Annular Shaped Charge with Offset Angle[J].EXPLOSIVE MATERIALS,2015,44(03):55.[doi:10.3969/j.issn.1001-8352.2015.04.013]
[7]张钧①,陈智刚①,李小军②,等.变壁厚球缺罩杆式射流的形成与侵彻性能研究[J].爆破器材,2016,45(01):39.[doi:10.3969/j.issn.1001-8352.2016.01.009]
　ZHANG Jun,CHEN Zhigang,LI Xiaojun,et al.Formation and Penetration Performances of Jetting Penetrator Charge of Hemispherical Liners with Variable Thickness[J].EXPLOSIVE MATERIALS,2016,45(03):39.[doi:10.3969/j.issn.1001-8352.2016.01.009]
[8]伊建亚①,王志军①,尹建平①,等.复合双药型罩结构冲击ERA及其后效作用研究[J].爆破器材,2017,46(03):45.[doi:10.3969/j.issn.1001-8352.2017.03.009]
　YI Jianya,WANG Zhijun,YIN Jianping,et al.Composite Double Liner Impacting ERA and Its Aftermath[J].EXPLOSIVE MATERIALS,2017,46(03):45.[doi:10.3969/j.issn.1001-8352.2017.03.009]
[9]王维占,赵太勇,陈智刚,等.不同材料双层球缺罩侵彻特性的研究[J].爆破器材,2017,46(05):43.[doi:10.3969/j.issn.1001-8352.2017.05.009]
　WANG Weizhan,ZHAO Taiyong,CHEN Zhigang,et al.Penetration Characteristics of Double-layer Hemispherical Liner Made of Different Materials[J].EXPLOSIVE MATERIALS,2017,46(03):43.[doi:10.3969/j.issn.1001-8352.2017.05.009]
[10]郭光全①,郭子云①,雷文星②,等.大开孔聚能装药威力性能研究[J].爆破器材,2018,47(05):49.[doi:10.3969/j.issn.1001-8352.2018.05.009]
　GUO Guangquan,GUO Ziyun,LEI Wenxing,et al.Study on Power Performance of Shaped Charge with Large Opening[J].EXPLOSIVE MATERIALS,2018,47(03):49.[doi:10.3969/j.issn.1001-8352.2018.05.009]

备注/Memo

备注/Memo:
收稿日期：2022-10-27
基金项目：安徽理工大学专利转化培育项目（ZL201908）；安徽理工大学2022年研究生创新基金（2022CX2053）；安徽省高校自然科学研究重大项目（KJ2017ZD11）
第一作者：王鑫（1999-），男，硕士研究生，主要从事爆破工程方面的科研工作。E-mail：1712219653@qq.com
通信作者：汪海波（1983-），男，教授，主要从事爆破工程方面的教学和科研工作。E-mail：wanghb_aust@163.com
更新日期/Last Update: 2023-06-05