[1]钱媛,李亚宁,贺伟君,等.高分子复合黏胶体系对CL-20包覆及性能的影响[J].爆破器材,2023,52(01):9-16.[doi:10.3969/j.issn.1001-8352.2023.01.002]
　QIAN Yuan,LI Yaning,HE Weijun,et al.Effect of Polymer Composite Viscose System on the Coating and Properties of CL-20[J].EXPLOSIVE MATERIALS,2023,52(01):9-16.[doi:10.3969/j.issn.1001-8352.2023.01.002]
点击复制

高分子复合黏胶体系对CL-20包覆及性能的影响()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
52
期数:
2023年01
页码:
9-16
栏目:
基础理论
出版日期:
2023-01-08

文章信息/Info

Title:
Effect of Polymer Composite Viscose System on the Coating and Properties of CL-20
文章编号:
5749
作者:
钱媛; 李亚宁; 贺伟君; 马含; 王伯良
南京理工大学化学与化工学院（江苏南京, 210094）
Author(s):
QIAN Yuan;  LI Yaning;  HE Weijun;  MA Han;  WANG Boliang
School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology (Jiangsu Nanjing, 210094)
关键词:
CL-20; 复合黏结剂; 溶液水悬浮法; 包覆; 热稳定性; 机械感度
Keywords:
CL-20;  composite binder;  solution-water suspension method;  coating;  thermal stability;  mechanical sensitivity
分类号:
TQ560.7
DOI:
10.3969/j.issn.1001-8352.2023.01.002
文献标志码:
A
摘要:
为了降低CL-20的机械感度，选择聚丙烯酸酯橡胶（HyTemp）和聚氨酯（TPU）作为黏结剂，微晶蜡作为钝感剂，对CL-20晶体表面进行包覆，分别制备了CL-20/HyTemp/微晶蜡、CL-20/TPU/微晶蜡、CL-20/HyTemp复配TPU/微晶蜡3种样品。分别通过扫描电子显微镜（SEM）、X射线衍射仪（XRD）、X射线光电子能谱仪（XPS）、差示扫描量热仪（DSC）、机械感度仪来表征样品的表面包覆情况、晶体结构、热稳定性以及机械感度。结果显示：HyTemp、TPU和微晶蜡都能有效包覆CL-20；且3种样品中CL-20的晶型仍为ε型，未发生改变。与包覆前相比，3种样品中氮元素含量均有大幅度的降低，包覆程度较高。其中，高分子复合黏结剂（HyTemp复配TPU）包覆样品的表面更为紧凑密实。与原料CL-20相比，复合黏结剂包覆样品的表观活化能提高了164.45 kJ/mol，熵变和焓变也有较大提升，反应活性降低，热稳定性明显改善；临界载荷由原料CL-20的60 N提高到了288 N，撞击感度也比原料CL-20降低了3.6 J，降感效果显著。采用HyTemp复配TPU作为黏结剂包覆的样品综合性能最好。
Abstract:
In order to reduce the mechanical sensitivity of CL-20, polyacrylate rubber (HyTemp) and polyurethane (TPU) were selected as binders, and microcrystal wax was used as a deterrent to coat the surface of CL-20 crystal. CL-20/HyTemp/microcrystal wax, CL-20/TPU/microcrystal wax, and CL-20/HyTemp compound TPU/microcrystal wax were prepared. Scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC) and mechanical sensitivity analyzer were used to characterize the surface coating, crystal structure, thermal stability and mechnical sensitivity of the samples. The results show that HyTemp, TPU and microcrystal wax could effectively encapsulate CL-20, and the crystal form of CL-20 in the three samples was still ε-type without change. Compared with the samples before coating, the content of nitrogen elements in the three samples reduced significantly, and the coating degree is relatively high. The surface of the sample coated with polymer composite binder (HyTemp compound TPU) is more compact and dense. Compared with CL-20, apparent activation energy of the sample coated with polymer composite binder increases by 164.45 kJ/mol, entropy change and enthalpy change also improve greatly, reaction activity reduces, and thermal stability improve significantly. Compared with the raw material CL-20, critical load of the sample coated with polymer composite binder increases from 60 N to 288 N, and its impact sensitivity also reduces by 3.6 J, indicating significant desensitization. The comprehensive performance of the sample coated with HyTemp compound TPU is the best.

参考文献/References:

［1］欧育湘, 刘进全. 高能量密度化合物［M］. 北京: 国防工业出版社, 2005.
OU Y X, LIU J Q. High energy density compounds ［M］. Beijing: National Defense Industry Press, 2005.
［2］SONG C G, LI X D, YANG Y, et al. Formation and characterization of core-shell CL-20/TNT composite prepared by spray-drying technique ［J］. Defence Technology, 2021, 17(6): 1936-1943.
［3］YANG Z J, LI J S, HUANG B, et al. Preparation and properties study of core-shell CL-20/TATB composites ［J］. Propellants, Explosives, Pyrotechnics, 2014, 39(1): 51-58.
［4］杨利, 王绍宗, 赵鹏娟, 等. 超细CL-20晶形控制技术研究［J］. 含能材料, 2008, 16(3): 254-257.
YANG L, WANG S Z, ZHAO P J, et al. Morphology controlling technique for submicron CL-20 ［J］. Chinese Journal of Energetic Materials, 2008, 16(3): 254-257.
［5］朱康, 李国平, 罗运军. 超临界CO2反溶剂法制备CL-20超细微粒［J］. 含能材料, 2012, 20(4):445-449.
ZHU K, LI G P, LUO Y J. Preparation of ultrafine CL-20 by supercritical CO2 anti-solvent method ［J］. Chinese Journal of Energetic Materials, 2012, 20(4): 445-449.
［6］李嘉颢, 郭婉肖, 李亚宁, 等. CL-20/FOX-7/蜡复合粒子的制备及性能研究［J］.火炸药学报, 2021, 44(4): 489-495.
LI J H, GUO W X, LI Y N, et al. Preparation and performance study of CL-20/FOX-7/wax composite particles ［J］. Chinese Journal of Explosives & Propellants, 2021, 44(4): 489-495.
［7］任秀秀, 赵省向, 方伟, 等. 3种CL-20/粘结剂PBX体系摩擦特性研究［J］. 火工品, 2020(4): 26-29.
REN X X, ZHAO S X, FANG W, et al. Study on friction properties of three CL-20/binder PBX system ［J］. Initiators & Pyrotechnics, 2020(4): 26-29.
［8］李小东, 孙红燕, 宋昌贵, 等. 黏结剂对CL-20/FOX-7基PBX性能的影响［J］. 火炸药学报, 2020, 43(1): 51-56.
LI X D, SUN H Y, SONG C G, et al. Effect of binder on the properties of CL-20/Fox-7-base polymer bonded explosive ［J］. Chinese Journal of Explosives & Propellants, 2020, 43(1): 51-56.
［9］魏华, 焦清介, 郭学永. 石蜡/Estane5703复合钝感包覆CL-20的研究［J］. 含能材料, 2017, 25(4): 321-325.
WEI H, JIAO Q J, GUO X Y. Desensitizing technology of CL-20 by coating wax and Estane5703 ［J］. Chinese Journal of Energetic Materials, 2017, 25(4): 321-325.
［10］邢江涛, 徐文峥, 王晶禹, 等. 丙烯酸酯橡胶对CL-20的包覆降感及改性［J］. 火炸药学报, 2017, 40(1): 34-39.
XING J T, XU W Z, WANG J Y, et al. Sensitivity reduction and modification of CL-20 coated with ACM ［J］. Chinese Journal of Explosives & Propellants, 2017, 40(1): 34-39.?
［11］叶宝云,王晶禹,安崇伟, 等. CL-20基复合含能材料的制备及性能［J］. 固体火箭技术, 2017, 40(2): 199-203.
YE B Y, WANG J Y, AN C W, et al. Preparation and properties of CL-20 based composite energetic material ［J］. Journal of Solid Rocket Technology, 2017, 40(2): 199-203.
［12］傅家森, 胡涛, 阎浩, 等. 丙烯酸酯橡胶/液体氟橡胶并用胶性能的研究［J］. 橡胶工业, 2020, 67(2): 114-118.
FU J S, HU T, YAN H, et al. Study on properties of ACM/liquid fluororubber blends ［J］. China Rubber Industry, 2020, 67(2): 114-118.
［13］崔小明. 三元乙丙橡胶并用改性的研究进展［J］. 橡胶科技, 2018 (8): 5-10.
CUI X M. Research progress of EPDM blends ［J］. Rubber Science and Technology, 2018 (8): 5-10.
［14］毕家林, 王士民, 韩春, 等. 氟橡胶的并用改性研究进展［J］. 弹性体, 2014, 24(5): 81-84.
BI J L, WANG S M, HAN C, et al. Research on blending modification of fluoroelastomers ［J］. China Elastomerics, 2014, 24(5): 81-84.
［15］李俊龙, 王晶禹, 安崇伟, 等. EPDM对CL-20的包覆及表征［J］. 火炸药学报, 2012, 35(1): 23-26.
LI J L, WANG J Y, AN C W, et al. Coating of CL-20 by EPDM and its characterization ［J］. Chinese Journal of Explosives & Propellants, 2012, 35(1): 23-26.
［16］杨学林, 曾诚成, 巩飞艳, 等. 聚多巴胺改性的CL-20和FOX-7炸药力学性能及热稳定性［J］. 含能材料, 2021, 29(11): 1049-1060.
YANG X L, ZENG C C, GONG F Y, et al. Mechanical properties and thermal stabilities of CL-20 and FOX-7 explosives modified by polydopamine ［J］. Chinese Journal of Energetic Materials, 2021, 29(11): 1049-1060.
［17］OZAWA T. A new method of analyzing thermogravimetric data ［J］. Bulletin of the Chemical Society of Japan, 1965, 38(11): 1881-1886.
［18］杨明甫, 郭婉肖, 李亚宁, 等. CL-20/TATB混合物的制备及性能表征［J］. 火炸药学报, 2021, 44(2): 189-194.
YANG M F, GUO W X, LI Y N, et al. Preparation and properties characterization of Cl20/TATB mixtures ［J］. Chinese Journal of Explosives & Propellants, 2021, 44(2): 189-194.
［19］ZHANG J Y, GUO X Y, JIAO Q J, et al. Effects of desensitizers on phase transitions, thermal behavior, and sensitivity of ε-CL-20 ［J］. Journal of Energetic Materials, 2018, 36(1): 111-120.
［20］GLASCOE E A, HSU P C, SPRINGER H K, et al. The response of the HMX-based material PBXN-9 to thermal insults: thermal decomposition kinetics and morphological changes ［J］. Thermochimica Acta, 2011, 515(1/2): 58-66.
［21］曾诚成, 巩飞艳, 刘世俊. Al@GAP复合粒子对LLM-105热分解性能的影响［J］. 火炸药学报, 2017, 40(4): 27-32.
ZENG C C, GONG F Y, LIU S J. Effect of Al@GAP composite particles on thermal decomposition performance of LLM-105 ［J］. Chinese Journal of Explosives & Propellants, 2017, 40(4): 27-32.
［22］徐洋, 黎勤, 王团盟. Estane/Al复合钝感包覆CL-20的研究［J］. 火工品, 2021(6): 46-49.
XU Y, LI Q, WANG T M. Research on insensitivity of CL-20 coated with Estane/Al ［J］. Initiators & Pyrotechnics, 2021(6): 46-49.
［23］李玉斌, 黄亨建, 黄辉, 等. 高品质HMX的包覆降感技术［J］. 含能材料, 2012, 20(6): 680-684.
LI Y B, HUANG H J, HUANG H, et al. Desensitizing technology of high quality HMX by coating ［J］. Chinese Journal of Energetic Materials, 2012, 20(6): 680-684.
［24］杨寅, 罗运军, 酒永斌, 等. 热塑性聚氨酯弹性体包覆CL-20及对NEPE推进剂性能影响［J］. 固体火箭技术, 2008, 31(4): 358-362, 373.
YANG Y, LUO Y J, JIU Y B, et al. Influence of CL-20 coated with thermoplastic polyurethane elastomers (TPU) on mechanical properties of NEPE propellant ［J］. Journal of Solid Rocket Technology, 2008, 31(4): 358-362, 373.
［25］LI H, GUO X Y, JIAO Q J, et al. Effects of polymers on phase transition of ε-CL-20 and CL-20-based PBXs ［J］. Journal of Beijing Institute of Technology, 2018, 27(3): 451-458.

相似文献/References:

[1]丁伟兴①,胡小玲②,董波②,等.N2O5/HNO3硝解TAIW一步法制备ε-HNIW[J].爆破器材,2015,44(04):15.[doi:10.3969/j.issn.1001-8352.2015.04.004]
　DING Weixing,HU Xiaoling,DONG Bo,et al.Synthesis of ε-HNIW by One-pot Nitrolysis of TAIW with N2O5/HNO3[J].EXPLOSIVE MATERIALS,2015,44(01):15.[doi:10.3969/j.issn.1001-8352.2015.04.004]
[2]卜令涛①,董波②,钱华②③,等.表面活性剂催化硝化TAIW制备CL-20[J].爆破器材,2016,45(02):25.[doi:10.3969/j.issn.1001-8352.2016.02.006]
　BU Lingtao,DONG Bo,QIAN Hua,et al.Economic Preparation of CL-20 by Nitrolysis of TAIW Using Surfactants as Catalyst[J].EXPLOSIVE MATERIALS,2016,45(01):25.[doi:10.3969/j.issn.1001-8352.2016.02.006]
[3]张路遥①②,刘卉①,郑文芳①,等.CL-20二氟氨基衍生物结构与性能的DFT研究[J].爆破器材,2018,47(03):7.[doi:10.3969/j.issn.1001-8352.2018.03.002]
　ZHANG Luyao,LIU Hui,ZHENG Wenfang,et al.DFT Study on the Structure and Properties of Difluoramino Derivatives of CL-20[J].EXPLOSIVE MATERIALS,2018,47(01):7.[doi:10.3969/j.issn.1001-8352.2018.03.002]
[4]李金鑫①,勾莉①,张争争①,等.CL-20基高爆热含铝压装混合炸药的研究[J].爆破器材,2020,49(03):33.[doi:10.3969/j.issn.1001-8352.2020.03.006]
　LI Jinxin,GOU Li,ZHANG Zhengzheng,et al.Study on CL-20 Based Aluminized PBX with High Detonation Heat[J].EXPLOSIVE MATERIALS,2020,49(01):33.[doi:10.3969/j.issn.1001-8352.2020.03.006]
[5]李文祥,邢晓玲,刁小强,等.CL-20基薄膜炸药的爆轰特性研究[J].爆破器材,2020,49(05):20.[doi:doi:10.3969/j.issn.1001-8352.2020.05.004]
　LI Wenxiang,XING Xiaoling,DIAO Xiaoqiang,et al.Detonation Characteristics of CL-20 Based Thin Film Explosive[J].EXPLOSIVE MATERIALS,2020,49(01):20.[doi:doi:10.3969/j.issn.1001-8352.2020.05.004]
[6]过光飞①,吴三震①,徐飞扬①,等.氟橡胶包覆对CL-20机械感度及爆轰特性的影响研究[J].爆破器材,2024,53(02):1.[doi:10.3969/j.issn.1001-8352.2024.02.001]
　GUO Guangfei,WU Sanzhen,XU Feiyang,et al.Influence of Fluorine Rubber Coating on Mechanical Sensitivities and Detonation Characteristics of CL-20[J].EXPLOSIVE MATERIALS,2024,53(01):1.[doi:10.3969/j.issn.1001-8352.2024.02.001]
[7]郏杭生①,崔立宝①,丁亚军①,等.含CL-20的微孔发射药的设计及性能研究[J].爆破器材,2024,53(04):37.[doi:10.3969/j.issn.1001-8352.2024.04.006]
　JIA Hangsheng,CUI Libao,DING Yajun,et al.Design and Performance Study on Microporous Gun Propellant Containing CL-20[J].EXPLOSIVE MATERIALS,2024,53(01):37.[doi:10.3969/j.issn.1001-8352.2024.04.006]

备注/Memo

备注/Memo:
收稿日期：2022-08-10
基金项目：国家自然科学基金（11702142）
第一作者：钱媛(1997-)，女，硕士研究生，主要从事火炸药及其安全性能研究。E-mail:1047850015@qq.com
通信作者：王伯良（1964-），男，教授，主要从事爆炸理论及其应用研究。E-mail: boliangwang@163.com
更新日期/Last Update: 2023-01-07